DOWNLOAD Sony SAL35F14G Service Manual ↓ Size: 1.74 MB | Pages: 79 in PDF or view online for FREE

Model
SAL35F14G
Pages
79
Size
1.74 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
sal35f14g.pdf
Date
PREV: Sony SAL20TC (serv.man2) Service Manual

Sony SAL35F14G Service Manual ▷ View online

HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP15
Adhesive bond (B-10):
J-6082-612-A
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20):
J-6082-611-A
Universal wrench:
J-6082-609-A
Chip-A for Universal wrench: J-6082-609-1
Chip-B for Universal wrench: J-6082-609-2
Note:
Select the chip-A or chip-B for usage.
1.
Apply the anti-diffusion agent (A-20) to the indicated portions of cam ring.
2.
Apply the grease (G-35) to the cam ring, cam groove and them contact zone.
3.
Attach the float ring so that the groove of cam ring places the bosses of float ring.
4.
Apply the grease (G-35) to the indicated portions of cam ring holder.
5.
Use the universal wrench, After tightening the cam ring holder, loosen it about 10 to 15mm from dead end, apply the adhesive bond
(B-10) to indicated portion.
Note:
After apply the adhesive bond (B-10), plese leave it for 6 hours or move. (The mountside is the under.)
6.
Conform the movement of the cam ring.
Cam Ring
Apply the grease 
(G-35)
After confirming the movement, 
apply the adhesive bond (B-10) in 
width of 5 to 10mm to 2 locations.
Apply the grease (G-35)
(6 locations of cam groove)
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion agent (A-20)
Cam Ring Holder
Apply the grease (G-35) to holding 
surface sides of cam ring holder.
Apply the anti-diffusion agent (A-20)
Cam Ring
Cam Ring
Apply the grease (G-35)
Cam Ring Holder
Apply the adhesive bond (B-10)
(circumference of 2 locations, 
width of 5 to 10mm)
Fixed Barrel
Apply the grease (G-35)
(6 locations of cam groove)
Apply the grease (G-35)
Fixed Barrel
Groove
Boss of float ring
Focus Operating Ring
Ver 1.2  2007.06
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP16
Adhesive bond (B-40):
J-6082-614-A
Grease (G-35):
J-6082-621-A
Grease (G-80):
J-6082-625-A
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) and the grease (G-35), (G-80) to the indicated portion of the fixed barrel.
2.
Apply the grease (G-80) to contact zone of the torque ring B, the fixed barrel and the friction spring.
3.
Apply the grease (G-80) to contact zone of the torque ring hold ring and the fixed barrel.
4.
Attach the torque ring hold ring to the fixed barrel with indicated.
5.
Attach the friction spring and torque ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.
6.
Apply the adhesive bond (B-40) to the indicated portion of torque ring hold ring.
7.
Apply the grease (G-80) to contact zone of the focus operating ring and the focus operating ring guide fin.
8.
Loosen the stopper screw of the scissors lever block, align the focus operating ring to the pinch lever and attach them. Tighten the
focus operating ring guide pin.
9.
Tighten the stopper screw of the scissors lever block.
Torque Ring 
Hold Ring
Groove
Apply the adhesive 
bond (B-40)
(Screw hole part)
Apply the adhesive 
bond (B-40)
(Screw hole part)
Apply the adhesive 
bond (B-40)
(Screw hole part)
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
Apply the adhesive
bond (B-40)
Torque Ring A
Friction Spring
 Fixed Barrel
Torque Ring 
Hold Ring
Torque Ring 
Hold Ring
Torque Ring 
Hold Ring
long
short
short
long
long
short
Focus Operating Ring Guide Pin
Focus Operating Ring
Focus Operating Ring
Guide Pin
Torque Ring B
Torque Ring A
Friction Spring
Fixed Barrel
Apply the grease (G-80)
Apply the grease
(G-35)
Apply the grease
(G-35)
Apply the grease 
(G-80)
Fixed Barrel
Apply the grease (G-35)
Focus Operating Ring
Focus Operating
Ring Guide Pin
Focus Operating Ring
Guide Pin
Scissors lever block
Apply the anti-diffusion agent (A-20)
Apply the grease (G-35)
Apply the grease (G-80)
Fixed Barrel
Ver 1.2  2007.06
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP17
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive 
bond (B-40)
Torque Ring A
Torque Ring A
Charging Wick Pin
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion
agent (A-20)
Apply the anti-diffusion agent (A-20)
Torque Ring A
Torque Ring B
Apply the grease (G-115)
Scissors
Lever Block
Scissors
Lever Block
Scissors Lever Block
Float RIng
Float RIng
Adhesive bond (B-40):
J-6082-614-A
Grease (G-115):
J-6082-627-A
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portions of the torque ring A.
2.
Apply the grease (G-115) to contact zone of the torque ring A, the float ring and the scissors lever block.
3.
Attach the float ring and the scissors lever block to the torque ring A, tighten the screw temporarily.
Note:
When turning the float ring, to become shake is minimized and to become turn the float ring smoothly, do the adjustment of
the changing wick pin of scissors lever block.
4.
Attach the torque ring B to torque ring A shown in the figure, apply the adhesive bond (B-40) to the screws and tighten them.
5.
Affix the friction Tape A to torque ring A shown in figure.
Ver 1.2  2007.06
Affix to the edge side.
Edge side
Torque Ring A
Torque Ring A
Friction Tape A
Friction Tape A
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP18
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion of the focus operating ring.
2.
Affix the friction sheet B shown in figure.
Note:
Do not flow the anti-diffusion agent (A-20) into affix side of friction sheet B.
Standard position 
of taping
Focus Operating Ring
Focus Operating Ring
Friction Sheet B
Do not protrude from the 
upper part.
Do not float, Do not peel off
•
 Affix to shaded portion.
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion agent
(A-20)
Apply the anti-diffusion agent (A-20)
Page of 79
Display

Click on the first or last page to see other SAL35F14G service manuals if exist.

RANDOM: