Sony SAL35F14G Service Manual ▷ View online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP18
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion of the focus operating ring.
2.
Affix the friction sheet B shown in figure.
Note:
Do not flow the anti-diffusion agent (A-20) into affix side of friction sheet B.
Standard position
of taping
of taping
Focus Operating Ring
Focus Operating Ring
Friction Sheet B
Do not protrude from the
upper part.
upper part.
Do not float, Do not peel off
•
Affix to shaded portion.
Apply the anti-diffusion agent (A-20)
Apply the anti-diffusion agent
(A-20)
(A-20)
Apply the anti-diffusion agent (A-20)
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP19
1.
Affix the flexible substrate setting tape A, the flexible substrate setting tape C and the FHB adhesion tape to the DV-FH flexible
shown in figure.
2.
Affix the DV-FH flexible to outer barrel and G decoration ring shown in figure.
Standard
position
position
Standard
position
position
Flexble Substrate Setting Tape A
Flexble Substrate Setting Tape C
FHB Adhesion Tape
DV-FH Flexible
Standard
position
position
DV-FH flexible
Outer Barrel and G Decoration Ring
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP20
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Apply the adhesive bond (LOCTITE 460) to the tip of mount index and install it to the outer barrel and G decoration ring.
HELP21
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Adhesive bond (B-10): J-6082-612-A
1.
Apply a little amount of the adhesive bond (LOCTITE 460) to the indicated portions of focus hold button base.
2.
Apply the adhesive bond (B-10) to the tip of one screw shown in figure and tighten the screw.
3.
Perform “4-8. FOCUS HOLD BUTTON CHECK (FOCUS HOLD BUTTON)”.
ft
m
Mount Index
Apply the adhesive bond (LOCTITE 460)
to the tip of mount index
to the tip of mount index
Outer Barrel and G Decoration Ring
Focus Hold Button Base
Click Plate
Dust Proofing Tape
Focus Hold Button
Washer
Apply the adhesive bond (B-10)
Apply the adhesive bond (LOCTITE 460)
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP22
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to all circumferences of indicated portions.
2.
Apply the ant anti-diffusion agent (A-20) to all circumferences of 2 group lens block.
HELP23
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
1.
After the optical axis adjustment (Refer to 4-22 page), apply the adhesive bond (B-10) to the indicated portion of G10 stopper.
2.
Apply the anti-diffusion agent (A-20) as shown in figure.
G4
G5
G6
2 Group Lens Block
2nd Moving Frame
Apply the anti-diffusion agent (A-20) to all
circumference of shaded portion.
circumference of shaded portion.
Apply the anti-diffusion agent (A-20) to all
circumference of shaded portion.
circumference of shaded portion.
Apply the anti-diffusion
agent (A-20)
agent (A-20)
G7
G8
G9
G10
Apply the adhesive bond (B-10)
G10 Stopper
3 Group Lens Block
Apply the anti-diffusion
agent (A-20)
agent (A-20)
Ver 1.2 2007.06
Click on the first or last page to see other SAL35F14G service manuals if exist.