Sony SAL35F14G Service Manual ▷ View online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
Apply grease (G-85).
(slide portion)
(slide portion)
Apply grease (G-85).
(gear portion)
(gear portion)
Outside Barrel
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
HELP09
Grease (G-85): J-6082-626-A
Apply grease (G-85) to the gear of coupler and the slide portion.
HELP10
Adhesive bond (B-40): J-6082-614-A
Apply bond (B-40) to 4 screws shown in figure and tighten the screws.
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP11
Adhesive bond (B-60): J-6082-616-A
1.
Cut the polyester tape (black) 10mm in 15mm in length, affix as shown in figure.
2.
Please follow the following points at the time of obtaining a main flexible unit.
Main Flexible Unit
Flexible Substrate
Base Plate
Base Plate
Main Flexible Unit
Overlapping a little.
Turns the polyester tape,
and put it.
and put it.
Sticking standard
Main Flexible Unit
Flexible Substrate Base Plate
Main Flexible Unit is turned in part A, put,
and the adhesive bond (B-60) is spread on
the instruction part in figure.
and the adhesive bond (B-60) is spread on
the instruction part in figure.
A
Flexible tape B is put on the flexible substrate base
plate and after putting, Main flexible unit is put along
the putting standard.
plate and after putting, Main flexible unit is put along
the putting standard.
Flexible Substrate
Base Plate
Base Plate
Flexible Substrate
Setting Tape B
Setting Tape B
Flexible Substrate
Setting Tape D
Setting Tape D
Part A is bent in the direction of the arrow, and Put it.
A
Putting standard
10mm
Polyester Tape (Black) 10mm
(10
(10
×
15mm)
Ver 1.2 2007.06
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP12
Adhesive bond (B-40): J-6082-614-A
Grease (G-85):
J-6082-626-A
1.
Apply the adhesive bond (B-40) to the tips of screwed portions of 2 stopper pins and tighten 2 stopper pins.
2.
Apply the adhesive bond (B-40) to the tips of 4 screws shown in figure and tighten 4 screws.
3.
Apply the grease (G-85) to all circumferences of gear of connect ring.
Apply the adhesive bond (B-40)
Stopper pin
Stopper pin
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the grease (G-85)
to the circumference of gear.
to the circumference of gear.
Connect Ring
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP13
Adhesive bond (B-40): J-6082-614-A
1.
Rotarting the cam ring, affix indicated hole of the cam ring and U groove of the fixed barrel.
2.
Align the notch of the fixed barrel and pin of the aperture operation plate block, attach the inner barrel.
3.
Select the guide rollers fitting to the grooves of cam ring, apply the adhesive bond (B-40) to the tips of screwed portions of guide
pins, and tighten the guide pins.
Note:
• Confirm that the cam ring rotates smoothly.
• Install parts of shaded portion in the 2 group lens block.
Hole
Guide Roller
Pin of aperture operation plate block
Inner Barrel
Notch
Notch
Cam Ring
Fixed Barrel
U Groove
Guide Roller
Guide Roller
Guide Roller
Guide Roller
Guide Roller
Guide Pin
Guide Pin
Guide Pin
Guide Pin
Guide Pin
Guide Pin
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
2 Group Lens Block
Click on the first or last page to see other SAL35F14G service manuals if exist.