Sony SAL1650 Service Manual ▷ View online
2-6
SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)
HELP10
Bond (B-40): J-6082-614-A
1. Install the 2nd group assy and 2nd group adjustment washer.
Note 1:
When installing the 2nd group assy, align the groove of cam tube assy with the projection of 2nd group assy.
2. Tighten 3 screws.
Note 1:
Apply 2 drops of adhesive bond (B-40) to the tips of screws.
2nd Group Assy
2nd Group Adjustment Washer
1st Group Slip Assy
Apply the bond
(B-40)
(B-40)
Groove of the Cam Tube Assy
Align the Groove of the Cam Tube Assy
with the projection of the 2nd Group Assy.
with the projection of the 2nd Group Assy.
2nd Group Assy
Eye-piece side
Projection of the 2nd Group Assy
HELP11
Bond (B-40): J-6082-614-A
Grease (G-48): J-6082-669-A
Grease (G-48): J-6082-669-A
1. Apply the grease (G-48) to the indicated portion of 1st group slip assy.
Apply the grease
(G-48)
(G-48)
Apply the grease
(G-48)
(G-48)
1st Group Slip Assy
2. Install the 2nd group-3rd group-4th group assy to the 1st group slip assy,
aligning the pin of cam tube assy with the index of 1st group
slip assy as shown in the figure.
3. Tighten 3 screws.
Note 1:
Apply 2 drops of adhesive bond (B-40) to the tips of screws.
1st Group Slip Assy
Index mark
2nd-3rd-4th Group Block
Pin of the Cam Tube Assy
Pin of the Cam Tube Assy
Apply the bond
(B-40)
(B-40)
2-7
SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)
HELP12
Bond (B-40): J-6082-614-A
1. Install the 2nd group slip assy to the cam tube assy, aligning the U-shaped groove of cam tube assy with the U-shaped groove of 2nd
group slip assy as shown in the figure.
2. Apply 2 drops of adhesive bond (B-40) to the tips of screws and tighten 3 screws.
2nd Group Slip Assy
U-shaped grooves
U-shaped grooves
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Cam Tube Assy
HELP13
Bond (B-40): J-6082-614-A
1. Install the 3-4th group assy to the cam tube assy, aligning the U-shaped groove of cam tube assy with the U-shaped groove of 3-4th
group assy as shown in the figure.
2. Apply 2 drops of adhesive bond (B-40) to the tips of screws and tighten 6 screws.
U-shaped grooves
U-shaped grooves
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Apply the bond
(B-40)
(B-40)
Cam Tube Assy
3rd-4th Group Block
HELP14
Bond (B-40): J-6082-614-A
1. Install the 3rd group assy to the 3rd group slip assy.
2. Tighten 3 screws, pushing the 3rd group assy in the arrow direction
2. Tighten 3 screws, pushing the 3rd group assy in the arrow direction
Note:
Apply 2 drops of adhesive bond (B-40) to the tips of screws.
3rd Group Slip Assy
3rd Group Assy
Apply the bond
(B-40)
(B-40)
HELP15
Bond (B-110): J-6082-617-A
1. Apply the adhesive bond (B-110) to the indicated portion of middle barrel assy and install the focus rubber.
Apply the bond
(B-40)
(B-40)
Focus Rubber
1st Group Slip Assy
3-1
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)
3. REPAIR PARTS LIST
NOTE:
• -XX and -X mean standardized parts, so they may have some difference
• -XX and -X mean standardized parts, so they may have some difference
from the original one.
• Items marked * are not stocked since they are seldom required for
routine service. Some delay should be anticipated when ordering these
items.
items.
• The mechanical parts with no reference number in the exploded views
are not supplied.
3-1. EXPLODED VIEWS
3-1-1. MOUNT ASSY AND 1ST GROUP ASSY
3-1-2. OUTER BARREL ASSY
ns: not supplied
D
C
A
B
A
C
D
B
ns
(See Section 3-1-4)
(See Section 3-1-3)
55
61
63
64
65
59
60
59 60
62
52
51
53
56
54
57
58
59
59
66
67
68
69
(Note 1) The number or type of these parts need
to be selected according to adjustment
etc.
Select the part referring to page 3-3.
(Note 1)
これらの部品は調整によって使用個数や種類
を選択する必要があります。
を選択する必要があります。
3-3
ページを参照して選択してください。
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
1
4-299-302-01
1ST GROUP RETAINER
2
A-1847-760-A 1ST
GROUP
ASSY
3
Selection Parts 1ST GROUP ADJUSTMENT WASHER (Note)
4
4-299-325-01 SINNABAR
RING
5
Selection Parts FB ADJUSTMENT WASHER (Note)
6
A-1847-772-A MOUNT
ASSY
7
3-283-156-01 BT1P2X5.5C3C
8
4-299-330-01
REAR LIGHT SHIELD BARREL
9
3-299-962-01 2P1.4X2.2
B3C
10
3-299-961-01
BT 10 1.7X4 GR-301
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
4-299-549-01 BTT3.5P1.4X2.5C3C
52
A-1847-774-A MR FLEXIBLE PC BOARD ASSY
53
4-299-323-01
ZOOM JOINT PLATE
54
A-1847-771-A SWITCH
ASSY
55
A-1847-769-A OUTER BARREL ASSY
56
4-299-310-01 BRAKE
RUBBER
57
4-299-309-01 BRAKE
SHEET
58
2-683-692-01
CHIP (MOUNT INDEX)
59
3-299-963-01 2P1.7X3
C3C
60
2-897-902-01 SCREW
61
4-299-324-01 FOCUS
BRUSH
62
2-699-096-01 2P1.7X1.6
C3C
63
4-400-724-01 T3.5P1.7X2C3C
64
4-299-328-01
ZOOM COMA COVER
65
A-1847-770-A ZOOM RING ASSY
66
4-299-329-01 ZOOM
RUBBER
67
A-1847-773-A MAIN PC BOARD ASSY
68
4-299-317-01
GROUND PC BOARD
69
4-138-165-01 BT2P1.7X3.5C3C
A
A
(See Section 3-1-2)
2
6
4
5
(Note)
3
(Note)
7
7
8
9
9
10
1
3-2
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
SAL1650 (DT 16-50 / F2.8) (DT 16-50mm F2.8 SSM)
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
101
4-299-318-01 FOCUS
RUBBER
102
4-299-322-01 BAYONET
SCREW
103
3-299-778-01 STOPPER
104
A-1847-767-A MIDDLE
BARREL
ASSY
105
4-299-319-01
MF LINKAGE BARREL
106
A-1847-768-A ROTARY
BARREL
ASSY
107
4-299-320-01
AF LINKAGE BARREL
108
4-299-321-
02
RUBBER
TUBE
109
A-1847-823-A SSM
ASSY
110
3-299-779-01 NYLON
SHEET
111
3-299-780-01 RESIN
RING
112
3-299-781-01 FINE
SAME
113
4-299-548-01
RUBBER PRESSURE PLATE
114
4-138-956-01
WASHER, SSM WAVE
115
3-299-783-01
SSM RETAINER PLATE
116
3-296-916-21 PRESSURIZING
PLATE
3-1-3. ULTRASONIC MOTOR AND MIDDLE BARREL ASSY
ns: not supplied
109
101
106
105
104
103
102
103
108
107
110
111
112
113
114
116
115
ns
ns
102
102
103
(Note 1) The number or type of these parts need to be selected
according to adjustment etc.
Select the part referring to page 3-3.
(Note 1)
これらの部品は調整によって使用個数や種類を選択する必要
があります。
があります。
3-3
ページを参照して選択してください。
3-1-4. 3RD GROUP ASSY AND CAM TUBE ASSY
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
151
4-299-306-01 G4
MASK
152
3-703-816-74
SCREW (M 1.4X4.5)
153
A-1847-762-A 2ND
GROUP
ASSY
154
Selection Parts 2ND GROUP ADJUSTMENT WASHER (Note)
155
A-1847-761-A 1ST GROUP SLIP ASSY
156
4-299-298-01
1ST COMA SCREW
157
A-1847-763-A 2ND GROUP SLIP ASSY
158
4-299-305-01
2ND COMA SCREW
159
Selection Parts 2ND COMA (Note)
160
4-299-308-01
3RD COMA SCREW
161
Selection Parts 3RD COMA (Note)
162
7-627-552-38
SCREW, PRECISION +P 1.7X3
163
Selection Parts SECOND CAM BARREL GUIDE COMA (Note)
164
4-299-299-01
1ST COMA SHAFT
165
Selection Parts 1ST COMA (Note)
166
3-281-968-01 SCREW
(M1.7X5)
167
A-1847-764-A 3RD
GROUP
ASSY
168
A-1848-330-A 3RD GROUP SLIP ASSY
169
Selection Parts WASHER, 4 GROUP ADJUSTMENT (Note)
170
A-1847-765-A 4TH
GROUP
ASSY
171
4-299-547-01 SCREW,
BOLT
172
4-299-326-01 G16
MASK
173
A-1847-766-A CAM
TUBE
ASSY
A
A
151
153
156
156
156
157
160
155
152
152
164
162
158
162
160
164
166
167
166
162
164
158
160
168
171
170
172
173
171
159
(Note)
158
165
(Note)
163
(Note)
159
(Note)
163
(Note)
165
(Note)
163
(Note)
159
(Note)
161
(Note)
154
(Note)
161
(Note)
161
(Note)
169
(Note)
169
(Note)
169
(Note)
165
(Note)
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Ver. 1.3 2012.05
Click on the first or last page to see other SAL1650 service manuals if exist.