Sony SAL1118 Service Manual ▷ View online
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP07
Attach the main pcb assy, and fix it with two screws as shown in the figure.
Note:
Be careful not to tighten the two screws too much.
HELP08
Note:
About the insulating tape in the sentence. When shipping it, Mending tape (2-886-794-01) is used.
1.
Set the focus gear barrel to the over infinity position (infinity end) while maintaining the support barrel assy so as not to rotate it.
2.
Affix the two insulating tapes.
3.
Perform “4-4-3. Focus-shift Adjustment”.
Screws
Main Pcb Assy
Support Barrel Assy
Insulating Tape (Two areas)
Focus Gear Barrel
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP09
Apply grease (G-15) to the instruction portions of the length groove barrel as shown in the figure.
Grease (G-15): J-6082-619-A
HELP10
Apply grease (G-15) to the instruction portions of the cam barrel as shown in the figure.
Grease (G-15): J-6082-619-A
Apply grease (G-15)
Apply grease (G-15)
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP11
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-15): J-6082-619-A
Grease (G-85): J-6082-626-A
Apply anti-diffusion agent (A-20) and grease (G-15 and G-85) to the instruction portions of the 1st lens slip barrel.
Apply anti-diffusion
agent (A-20)
(all circumference)
agent (A-20)
(all circumference)
Apply grease (G-85)
Apply grease (G-15)
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP12
Assemble the 5th lens slip barrel, length groove barrel, cam barrel, 1st lens slip barrel, 3rd lens barrel assy and 4th lens barrel assy as
shown in the figure, and fix them with each three COMA-A (A-C) and COMA screw-As, COMA-B (A-K) and COMA screw-Cs, and
COMA-C (A-U) and COMA screw-Cs.
Note:
Select the COMA-A, COMA-B, and COMA-C of a proper diameter from the following table.
Part No.
Description
Diameter
2-886-797-01
COMA-A-A
6.01
Part No.
Description
Diameter
D1
D2
2-886-842-01
COMA-B-A
4.51
5.01
2-886-850-01
COMA-B-J
4.53
5.03
2-886-851-01
COMA-B-K
4.50
5.01
Part No.
Description
Diameter
D1
D2
D3
2-886-800-01
COMA-C-A
4.51
5.01
6.015
2-886-818-01
COMA-C-U
4.50
5.01
6.015
Ver 1.1 2006.12
Click on the first or last page to see other SAL1118 service manuals if exist.