Sony SAL100M28 (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Ver. 1.2 2007.08
Sony EMCS Co.
2007H0800-1
© 2007. 08
Published by Kohda TEC
US Model
Canadian Model
AEP Model
Chinese Model
SUPPLEMENT-1
File this supplement with the service manual.
(DI07-091)
•
Addition of procedure for repair
•
Correction of error in writing
9-852-102-82
SAL100M28
(MACRO 2.8/100) (100mm F2.8 Macro)
— 2 —
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Page
•
Correction of error in writing
3-1.
EXPLODED VIEWS
Ref. No.
Part No.
Description
218
9-913-210-01 INSULATION TAPE (Note 2)
Ref. No.
Part No.
Description
* 218
9-913-210-01 INSULATION TAPE (Note 2)
HELP22
Flexible PC Board (A)
Apply the adhesive bond (B-60)
Do not put on each other.
Polyester Tape (Black) 4 mm
(4
(4
x
15 mm)
FH Button Back Side Cover Tape
(20
(20
x
16 mm)
Incorrect
Correct
3-5
4-5.
FOCUS-SHIFT CHECK
Page
Incorrect
Correct
4-14
Focus-shift = flange back (f’F) of open aperture reading - flange back (f’F) reading (using aberration measuring cap 55mm)
Focus-shift = flange back (f’F) reading (using aberration measuring cap 55mm) - flange back (f’F) of open aperture reading
Adhesive bond (B-60): J-6082-616-A
1.
Attach the flexible PC board (A), and attach the FH button back side cover tape and polyester tape (black) 4 mm as shown in the
figure.
2.
Apply the adhesive bond (B-10) thinly as shown in figure.
Note:
Make sure that the adhesive bond is not out of convex of the fixed holding tube block.
*
*
*
&
: Points added portion.
: Points changed portion.
Added contents
Display