Sony DSC-WX500 Service Manual ▷ View online
3.
Attach the Ornamental Ring A and push it gently.
Barrier Tapes
Barrier Tapes
Ornamental Ring A
DSC-WX500
4-21
4-3-2.
2 Group Frame Block Assy Replacing Method
Removal
1.
Remove the LF-2123 Flexible Board from the claw.
2.
Remove the SS Flexible Board from the connector of the LF-2123 Flexible Board.
3.
Remove the LF-2123 Flexible Board from the groove, the hole and the claw.
Hole
Claw
Groove
LF-2123 Flexible Board
SS Flexible Board
Connector
Claw
4.
Remove the five screws.
5.
Remove the FG Retainer.
6.
Remove the Z Retainer.
Screws
Screws
FG Retainer
Z Retainer
7.
Remove the two FG Sensors and a Reset Sensor on the LF-2123 Flexible Board.
Reset Sensor
FG Sensors
8.
Remove the LF-2123 Flexible Board from the two bosses.
9.
Remove the Flexible Board of Rear Lens Assy from the connector for F Flexible Board of LF-2123 Flexible
Board.
Board.
DSC-WX500
4-22
10. Remove the Rear Lens Assy.
Bosses
Connector for F Flexible Board of
LF-2123 Flexible Board
LF-2123 Flexible Board
F Flexible Board of
Rear Lens Assy
Rear Lens Assy
Rear Lens Assy
LF-2123 Flexible Board
11. Unsolder the DC Motor Worm Assy and lands for motor of LF-2123 Flexible Board.
Solders
LF-2123 Flexible Board
DC Motor Worm Assy
12. Remove the two screws from the DC Motor Worm Assy.
DSC-WX500
4-23
13. Remove in order of the Gear D, Gear B/C, Worm Wheel and Gear A.
DC Motor Worm Assy
Gear D
Gear B/C
Worm Wheel
Gear A
Screws
14. Insert the Gear D and rotate it clockwise to full extend the lens.
Gear D
Gear D
Extend
15. Remove the SS Flexible Board from the lens block as shown in the figure below.
Pull out the SS Flexible
Board from this hole.
Board from this hole.
SS Flexible Board
Claw
SS Flexible Board
Hole
DSC-WX500
4-24
Click on the first or last page to see other DSC-WX500 service manuals if exist.