Sharp XV-Z200E (serv.man32) User Manual / Operation Manual ▷ View online
Connections and Setup
Connections and Setup
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
13
-14
Connecting the Projector to Other Devices
Before Connecting
Note
• Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off
the devices to be connected. After making all connections, turn on the projector and then the other
devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connec-
tions are made.
devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connec-
tions are made.
• Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipment:
■ A VCR, DVD player or other video equipment (See page 15.)
■ A DVD player or DTV* decoder (See page 17.)
*DTV is the umbrella term used to describe the new digital television system in the United States.
A computer using:
■ DVI to 15-Pin D-sub adapter (See page 21.)
■ A DVI cable (See page 22.)
■ An RS-232C cable (See page 23.)
Connecting the Power
Cord
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
the AC socket on the rear of the pro-
jector.
Supplied
accessory
accessory
-14
Power cord
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
14
Connections and Setup
-15
Connecting to Video Equipment
Connecting to Video
Equipment Using an
S-video Cable (INPUT 3)
Equipment Using an
S-video Cable (INPUT 3)
Using an S-video cable, a VCR, DVD player or
other video equipment can be connected to
INPUT 3 input terminal.
other video equipment can be connected to
INPUT 3 input terminal.
1
Connect an S-video cable to
the projector.
the projector.
2
Connect the S-video cable to
the video equipment.
the video equipment.
Note
• The INPUT 3 (S-VIDEO) terminal uses a
video signal system in which the picture
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
S-video cable
(commercially available)
(commercially available)
To S-video output terminal
To INPUT 3 terminal
VCR or other video equipment
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
15
Connecting to Video
Equipment Using a
Composite Video Cable
(INPUT 4)
Equipment Using a
Composite Video Cable
(INPUT 4)
Using a composite video cable, a VCR, DVD
player or other video equipment can be con-
nected to INPUT 4 input terminal.
player or other video equipment can be con-
nected to INPUT 4 input terminal.
1
Connect a composite video
cable to the projector.
cable to the projector.
2
Connect the composite video
cable to the video equipment.
cable to the video equipment.
To INPUT 4 terminal
VCR or other video equipment
To video output terminal
Composite video cable
-16
Connecting the Projector to Other Devices
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
16
