Sony DSC-WX500 Service Manual ▷ View online
28. Remove the 2 Group Frame Block Assy from the Linear Guide Barrel_B.
Tweezers
2G Springs
Hook
Hook
2 Group Frame Block Assy
Linear Guide Barrel_B
Installation
1.
Match the cabinet number of Linear Guide Barrel_B and the cabinet number of 2 Group Frame Block Assy, and
match the three vertical grooves of Linear Guide Barrel_B and the three projections of 2 Group Frame Block Assy
and assemble them.
match the three vertical grooves of Linear Guide Barrel_B and the three projections of 2 Group Frame Block Assy
and assemble them.
2.
Lift up the 2 Group Frame Block Assy so that the two hooks can be seen.
3.
Attach the two 2G Springs to the 2 Group Frame Block Assy by tweezers.
Tweezers
2G Springs
Hook
Hook
2 Group Frame Block Assy
Projection
Projections
Linear Guide Barrel_B
Vertical
grooves
grooves
Vertical
groove
groove
Cabinet number
Cabinet number
4.
Match the two grooves near the cabinet number of Cam Barrel and the two hooks near the cabinet number of Linear
Guide Barrel_B and assemble them.
Guide Barrel_B and assemble them.
DSC-WX500
4-29
5.
Assemble Linear Guide Barrel_B to the Cam Barrel by rotating itself counterclockwise.
Linear Guide Barrel_B
Linear Guide
Barrel_B
Barrel_B
Hooks
Cam Barrel
Cam Barrel
Grooves
Cabinet number
Cabinet number
6.
Match the Groove near the white part of 1 Group Frame Block Assy and the boss near the Triangle mark of Barrier
Frame and assemble them.
Frame and assemble them.
7.
Position the 1 Group Frame Block Assy so that the convex of 1 Group Frame Block Assy is matched to the convex
(right of three places) of Barrier Frame.
(right of three places) of Barrier Frame.
Barrier Frame
Barrier Frame
1 Group Frame
Block Assy
Block Assy
White part
Triangle
mark
mark
Boss
Convex
Three square marks
1 Group Frame
Block Assy
Block Assy
1 Group Frame
Block Assy
Block Assy
Groove
DSC-WX500
4-30
8.
In the state of previous step, match the convex of 1 Group Frame Block Assy and the concave of the Linear Guide
Barrel_A and assemble them.
Barrel_A and assemble them.
Linear Guide Barrel_A
1 Group Frame
Block Assy
Block Assy
Convex position set
Concave
Cabinet number
9.
Rotate the rear edge of Barrier Frame in the direction of the arrow and extend the Barrier Frame.
Linear Guide Barrel_A
Rear edge of
Barrier Frame
Barrier Frame
Linear Guide Barrel_A
Barrier Frame
10. Match the Concave of Front Assy and Triangle mark of Core Unit_3 and assemble them.
Front Assy
Core Unit_3
Concave
Triangle mark
DSC-WX500
4-31
11. Attach in order of Barrier Assy, Barrier Tape and Barrier Ring.
Note
Refer to
“Installation”
for assembling the Barrier Ring and Barrier Assy.
12. Make a state of the Core Unit_2 by rotating the Rear edge of Core Unit_3 counterclockwise.
Core Unit_2
Barrier Ring
Rear edge of
Core Unit_3
Core Unit_3
Barrier Assy
Barrier Tapes
13. Match the Diamond mark of Linear Motion Cam Barrel and the concave of Drive Gear Barrel Assy and assemble
them.
14. Rotate the Linear Motion Cam Barrel in the direction of arrow so that the concave of Drive Gear Barrel Assy is
matched to the diamond mark of the Linear Motion Cam Barrel.
Linear Motion
Cam Barrel
Cam Barrel
Match the concave of the Drive Gear Barrel Assy with
the diamond mark of the Linear Motion Cam Barrel.
the diamond mark of the Linear Motion Cam Barrel.
Drive Gear
Barrel Assy
Barrel Assy
Concave
Diamond mark
DSC-WX500
4-32
Click on the first or last page to see other DSC-WX500 service manuals if exist.