Sony DSC-WX1 (serv.man3) Service Manual ▷ View online
2-17E
DSC-WX1_L2
2-6-2. Inspection When Tube (A) Assy Or Cam Tube Is Replaced
Focus check
1
1
Preparation
• Camera installed re-assemble lens.
• Chart (Printed PDF file at the same magnification) (Refer to <Reference>)
• Tripod
• Mirror (ex. CD)
• Memory Stick
• PC
• Camera installed re-assemble lens.
• Chart (Printed PDF file at the same magnification) (Refer to <Reference>)
• Tripod
• Mirror (ex. CD)
• Memory Stick
• PC
2
Shoot setting
(1) Paste the chart.
(1) Paste the chart.
• Chart should be on the flat wall.
• Illuminance level in the chart should be the same.
• Make the tripod’s height and the center of the chart to the same height.
• Enough space needed for shooting.
• Illuminance level in the chart should be the same.
• Make the tripod’s height and the center of the chart to the same height.
• Enough space needed for shooting.
(2) Set the camera.
• Set [P] mode
• Set [Maximum] size
• Set ISO lowest level
• Set Steady Shot [OFF]
• Set Flash [OFF]
• Set [Maximum] size
• Set ISO lowest level
• Set Steady Shot [OFF]
• Set Flash [OFF]
(3) Set the camera on a tripod.
(4) Adjust the position of the camera and the chart.
(4) Adjust the position of the camera and the chart.
1. Set the zoom position of the camera at Wide end.
2. Attach the mirror onto the center of the chart.
2. Attach the mirror onto the center of the chart.
*The mirror should not tilt on the chart.
3. Set the camera to display the chart on LCD like in the following picture.
4. Adjust the camera position to the center of the chart.
4. Adjust the camera position to the center of the chart.
*Adjust the tripod height and the position (Lateral direction).
5. Adjust the camera angle to the frame of the chart with tripod.
Remove the mirror.
3
Shooting
(1) Set [Self-Timer]
(2) Shot
(1) Set [Self-Timer]
(2) Shot
4
Check the shot image.
(1) Check the shot image on PC.
(1) Check the shot image on PC.
100% Display (Display at the same magnification of its Pixel.)
Compare the image with the sample you set.
Compare the image with the sample you set.
No extreme focus blurring
It should be distinguished the black and white by the sharpness between them.
If it is in NG level, replace the lens unit.
It should be distinguished the black and white by the sharpness between them.
If it is in NG level, replace the lens unit.
<Reference>
•
•
How to Print the Chart
Print “Forcus-Chart_A3.pdf” with printer.
Print at the same magnification (It means 100 % size).
Check the settings of printer to print in proper size.
Print at the same magnification (It means 100 % size).
Check the settings of printer to print in proper size.
•
Check of chart size.
Make charts together and check if the size of charts is the following size.
* The chart consists of 2 pcs.
* The chart consists of 2 pcs.
DSC-WX1_L2
HELP
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
HELP 01: Microphone Harness,
Microphone Cushion (2)
HELP 03: Speaker Harness
HELP 04: Speaker Harness,
Protection Sheet (SP)
Protection Sheet (SP)
Protection Sheet (SP)
Speaker Harness
HELP 02: Microphone Harness,
Insulating Sheet (ST) (2)
Insulating Sheet (ST) (2)
White
Red
Black
Brown
Rib
Microphone Cushion (2)
Microphone Harness
DSC-WX1_L2
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM
POWER BLOCK DIAGRAM (1/2)
POWER BLOCK DIAGRAM (2/2)
3-1
DSC-WX1_L2
3. BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM
( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
A
: VIDEO SIGNAL
A
: AUDIO SIGNAL
A
: VIDEO/AUDIO SIGNAL
CP001
10M CMOS
IMAGER
78, 72, 66, 60, 48, 42, 36, 30, 76,
IC211
CPU,
CAMERA DSP,
AV SIGNAL PROCESS,
LENS CONTROL,
MODE CONTROL
MODE CONTROL
(2/8 - 4/8)
IC002
DC/DC
CONVERTER,
FRONT CONTROL
(7/8)
IC501
AUDIO/VIDEO
AMP
(5/8)
(5/8)
LENS DRIVE
OPTICAL
IMAGE
STABILIZATION
DRIVE
PITCH/YAW
SENSOR
SE403
IC402
(1/8)
K13
CN001
CN702
F13
A10
X001
60MHz
M1
L13
U29
T29
C8
B8
AH31
AD14
70, 64, 58, 46, 40, 34, 28, 54, 52
78, 72, 66, 60, 48, 42, 36, 30, 76,
70, 64, 58, 46, 40, 34, 28, 54, 52
CN709
28 - 36
CN710
CN703
5, 6
2 - 5, 7, 8
15, 17
25 - 30
12, 23
1, 2
40, 39
24, 19
CN401
4, 3
37, 39
51 - 48
16
13
12
44
18
24, 19
16
13
12
18
38
37
DOJP, DOIP, DOHP,
DOFP, DOEP, DOCP,
DOBP, DOAP, DOJM,
DOIM, DOHM, DOFM,
DOEM, DOCM, DOBM,
DOAM, DCKP, DCKM
DOFP, DOEP, DOCP,
DOBP, DOAP, DOJM,
DOIM, DOHM, DOFM,
DOEM, DOCM, DOBM,
DOAM, DCKP, DCKM
SENS_DATA_P0 -
SENS_DATA_P7,
SENS_DATA_M0 -
SENS_DATA_M7,
SENS_CLK_P,
SENS_CLK_M
SENS_DATA_P7,
SENS_DATA_M0 -
SENS_DATA_M7,
SENS_CLK_P,
SENS_CLK_M
XHS
IMGR_RST
XCLR
IMGR_TMP
IMAGER_TEMP
IRIS_M_BRK_2B, IRIS_M_DIR_2B
XVS
SENS_HD
SENS_VD
XHD
UART_TX, UART_RX
IC_211_UI, IC_211_UO
XACC_IN
XAV_JACK_IN
XMS_IN
USB_VBUS
IC_211_YOUT
XPWR_ON
BL_H
BL_L
ACV_UNREG
42
6
38
CN001
(1/2)
MIC_SIG
MIC_SIG
23
20
32
XRESET
XDD_SYS_RST
XVD
LCD_HS
LCD_VS
SENS_VD
E7
W21
AJ16
W20
AL20
J8
A1
B2
XIC_402_RST
E9
CLK_IC_402
E8
XDD_SYS_RST
XDD_SYS_RST
XDD_SYS_RST
XDIRECT_PB
D9
XPWR_ON
XPWR_ON
XPWR_ON
ST_UNREG
BL_L, BL_H
ACV_UNREG
XMS_IN,
USB_VBUS
AF_Light_K (Cathode)
XAF_LED
KEY_AD1
KEY_AD0
XDIRECT_PB
ND(
±)
FC_BRK_A, FC_DIR_A, FC_DIR_B
FOCUS_A, FOCUS_XA,
FOCUS_B, FOCUS_XB
32 - 29
10 - 7
14, 16
ZM_BRK_A, ZM_DIR_A
Z_DC_DRIVE(
±)
1, 2, 5, 6
MSHUT_EN, MSHUT_DIR
SHUTTER(
±)
PITCH(
±)
PITCH_HALL(
±)
25 - 22
19, 17
11, 12
YAW(
±)
YAW_HALL(
±)
T_TEMP_OUT
F_PI_C
41
27
Z_PI_C
Z_FG0_C,
Z_FG1_C
TH001
CD-764 BOARD
MC-200
FLEXIBLE
BOARD
FLEXIBLE
BOARD
ST-221
BOARD (1/2)
BOARD (1/2)
FP-1145
FLEXIBLE
BOARD (1/2)
FLEXIBLE
BOARD (1/2)
AF-122 BOARD
SY-233 BOARD
ST-221 BOARD (2/2)
CONTROL SWITCH
BLOCK (SW61330)
BLOCK (SW61330)
SDI, SCK
SENS_SO, SENS_SCK
IC_402_SI, IC_402_SO, XIC_402_SCK
LENS BLOCK
LENS
2.7 inch
COLOR
LCD
LCD901
LCD MODULE
BACKLIGHT
D0 - D7, DCK
LCD_D0 - LCD_D7, LCD_CK
MS_BS, MS_D0 - MS_D3, MS_CLK
MS_BS, MS_D0 - MS_D3, MS_CLK
USB_DP, USB_DM
USB_DP, USB_DM
MEMORY
STICK
DUO
CN704
IC_211_YOUT
IC_211_PBOUT
7
AG15
IC_211_PROUT
9
AJ14
V_LINE_OUT
34
D4
F6
AU_LINE_OUT
36
11
10, 12
23, 25
9, 15
26
6
24
4
2
20
16
7
XACV_DET
(Batt/XEXT)
24
19
CN001
MULTI
MULTI
CONNECTOR
MIC901
MICROPHONE
UNIT
CN701
8
7
MODE_DIAL0, MODE_DIAL1
1
D201
SELF-TIMER/
SMILE SHUTTER/
AF ILLUMINATOR
AF ILLUMINATOR
CN001
(2/2)
CN708
(2/2)
25
16
17
KEY_AD2
XAE_LOCK_SW
xSHUT_SW
XPWR_LED
KEY_AD2
XAE_LOCK_SW
xSHUT_SW
XPWR_LED
STRB_CHG
XSTRB_FULL
STRB_CHG_CNT
STRB_ON
FP-1145 FLEXIBLE
BOARD (2/2)
BOARD (2/2)
18
12
13
14
41
32
33
34
28
29
30
15
31
FLASH
CONTROL,
CHARGE
CONTROL
(1/2)
IC001
XSTRB_FULL
STRB_CHG
STRB_CHG_CNT
STRB_ON
FLASH
UNIT
(FL61330)
+
C901
CHARGING
CAPACITOR
SP901
SPEAKER
SP
±
SP
±
20, 22
10, 9
CN708
(1/2)
39
29
45
36, 38
+
–
BATTERY
TERMINAL
BTH BLOCK
ASSY
BATT_UNREG
C
BATT_SIG
BATT_UNREG
BATT_SIG
BATT_GND
9
1 - 8
BATTERY
DETECTOR
(6/8)
IC204
E4
B2
B1, B5, C5, D5
XCS_IC_204,
XIC_204_SCK,
IC_204_SO,
IC_204_SI
XDD_SYS_RST
10 - 17
A5, A3
IC_211_AUIN
C6
IC_211_L_AUOUT,
IC_211_R_AUOUT
IC_211_R_AUOUT
E6, A6
IC_501_CLK
E3
AK21
IC_501_CLK
IC_501_CLK
X205
12MHz
XBATT_IN
Q009
Y17
D10
XACV_IN
Q001,
Q002
Q002
D001
D002
S103
(BURST/BRACKET)
(SHUTTER)
(PLAY)
S102
D106
(POWER )
POWER
S104
D706
(ACCESS)
XACCESS_LED
S010
MODE
DIAL
S901
T (ZOOM), W (ZOOM), MENU, DELETE
v (DISP) , V (SELF TIMER) , B (FLASH), b (SMILE) , z (SET)
S001 - S005
S006 - S009
D707
J11
H11
X001
32.768kHz
BB_SO, XBB_SCK
BB_SI, BB_SO, XBB_SCK
BB_SO, XBB_SCK
SI, SCLK
05
IRIS MOTOR
DRIVER
FOCUS MOTOR
DRIVER
ZOOM MOTOR
DRIVER
SHUTTER MOTOR
DRIVER
TH211
Click on the first or last page to see other DSC-WX1 (serv.man3) service manuals if exist.