Sony DSC-W330 (serv.man2) Service Manual ▷ View online
DSC-W330_L2
2-6
#30
#30
#30
#176
151
163
(Note 1, 2)
(Note 3)
152
ns
ns
ns
ns
ns
ns
ns
158
153
153
154
155
156
157
160
159
161
162
(including IC001
(CCD imager))
(CCD imager))
2-1-4. LENS BLOCK SECTION
ns: not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
151
8-848-862-01
DEVICE, LENS LSV-1380B (Note 1, 2)
152
4-155-850-01
RING A (S), ORNAMENTAL
153
4-147-109-01 TAPE,
BARRIER
154
A-1743-714-A BARRIER
ASSY
155
4-147-091-01
FRAME, 1 GROUP
156
A-1743-728-A CAM
TUBE
BLOCK
ASSY
157
A-1743-727-A STRAIGHT
TUBE
LUBRICATED
ASSY
158
1-787-874-11 STEPPING
MOTOR,
OPTICAL(F1380)
159
4-147-113-01 SEAL,
FG
160
A-1743-730-A WORM B LUBRICATED ASSY
161
A-1743-731-A NARUTO GEAR LUBRICATED ASSY
162
A-1743-725-A DC MOTOR WORM A ASSY
163
A-1731-547-A CD-774 BOARD, COMPLETE
(including IC001 (CCD imager)) (Note 3)
#30
3-086-156-11 SCREW
B1.2
#176 3-947-504-31 SCREW
(M1.2)
1. The meaning of the sign in left figure is as follows. Be careful when it removes.
◇-X
: Solder
DISASSEMBLY
Note
Note 2: Refer to the following each item when you exchange parts of Lens Block.
• 1-7. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page
1-3)
• 1-8. OPTICAL STEPING MOTOR (F1380) REPLACING METHOD (page 1-3)
• 1-9. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-4)
• 1-10. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
• 1-9. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-4)
• 1-10. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
1 GROUP FRAME REPLACING METHOD (page 1-4)
• 1-11. FINAL INSPECTION (page 1-8)
Note 3: Be sure to read “Precautions for Replacement of
Imager” on page 6-1 when changing the imager.
Screw
#30: M1.2 X 3.5 (Tapping)
(White)
3-086-156-11
3-086-156-11
3.5
1.2
Note 1
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
• Hold the Lens Block at the
center of both sides.
center of both sides.
• Do not hold the following part.
Hold here.
Lens Flexible Board
#176: M1.2 X 2.0
(Silver)
3-947-504-31
(Silver)
3-947-504-31
2.0
1.2
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2010.01
DSC-W330_L2
2-7
Conversion (2P) Adaptor
0 1-569-008-33
0 1-569-008-33
(E : NTSC)
Power cord (mains lead)
(EXCEPT US, CND, BR)
0 1-837-421-11 (UK,
(EXCEPT US, CND, BR)
0 1-837-421-11 (UK,
E (Saudi)
, HK)
0 1-837-428-11 (KR)
0 1-837-427-11 (AEP,
0 1-837-427-11 (AEP,
E (EXCEPT Saudi)
)
0 1-837-429-11 (AUS)
CD-ROM
(Cyber-shot application software /
“Cyber-shot Handbook”)
4-166-047-01
(Cyber-shot application software /
“Cyber-shot Handbook”)
4-166-047-01
Cyber-shot Handbook (PDF)
The CD-ROM supplied contains all of language version of
the Instruction Manual in pdf (Cyber-shot Handbook.pdf) for printing.
the Instruction Manual in pdf (Cyber-shot Handbook.pdf) for printing.
The printed matter is not supplied. If required,
please order it with the part number below.
please order it with the part number below.
4-166-049-01
(JAPANESE)
* 4-166-049-11
(ENGLISH)
* 4-166-049-21
(FRENCH)
* 4-166-049-31
(ITALIAN)
* 4-166-049-41
(SPANISH)
* 4-166-049-51
(PORTUGUESE)
* 4-166-049-61
(GERMAN)
* 4-166-049-71
(DUTCH)
* 4-166-049-81 (TRADITIONAL CHINESE)
* 4-166-049-91 (SIMPLIFIED CHINESE)
* 4-166-050-11
* 4-166-049-91 (SIMPLIFIED CHINESE)
* 4-166-050-11
(RUSSIAN)
* 4-166-050-21
(ARABIC)
* 4-166-050-31
(PERSIAN)
* 4-166-050-41
(KOREAN)
* 4-166-050-51
(POLISH)
* 4-166-050-61
(CZECH)
* 4-166-050-71
(HUNGARIAN)
* 4-166-050-81
(SLOVAK)
* 4-166-050-91
(SWEDISH)
* 4-166-051-11
(FINNISH)
* 4-166-051-21
(NORWEGIAN)
* 4-166-051-31
(DANISH)
* 4-166-051-41
(THAI)
* 4-166-051-51
(MALAY)
* 4-166-051-61
(TURKISH)
* 4-166-051-71
(GREEK)
* 4-166-051-81
(UKRAINIAN)
* 4-166-051-91
(CROATIAN)
* 4-166-052-11
(ROMANIAN)
* 4-166-052-21
(INDONESIAN)
Battery charger
(BC-CSN/BC-CSNB)
0 1-487-523-21 (US, CND)
0 1-487-523-61 (EXCEPT US, CND)
(BC-CSN/BC-CSNB)
0 1-487-523-21 (US, CND)
0 1-487-523-61 (EXCEPT US, CND)
Instruction Manual
4-166-054-11
4-166-054-11
(ENGLISH)
* 4-166-054-21 (ENGLISH, SPANISH)
* 4-166-054-31 (ENGLISH, FRENCH)
* 4-166-054-41 (ENGLISH, RUSSIAN, UKRAINIAN)
* 4-166-054-51 (ENGLISH, FRENCH, ITALIAN, SPANISH, PORTUGUESE,
* 4-166-054-31 (ENGLISH, FRENCH)
* 4-166-054-41 (ENGLISH, RUSSIAN, UKRAINIAN)
* 4-166-054-51 (ENGLISH, FRENCH, ITALIAN, SPANISH, PORTUGUESE,
GERMAN, DUTCH, TURKISH, GREEK, POLISH, CZECH,
HUNGARIAN, SLOVAK, SWEDISH, FINNISH, NORWEGIAN,
DANISH, CROATIAN, ROMANIAN)
* 4-166-054-61 (ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE,
MALAY, INDONESIAN, THAI, ARABIC, PERSIAN)
* 4-166-054-71 (ENGLISH, SPANISH, PORTUGUESE)
* 4-166-054-81 (ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE,
* 4-166-054-81 (ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE,
INDONESIAN, ARABIC, PERSIAN)
* 4-171-810-11 (ENGLISH, TRADITIONAL CHINESE, SIMPLIFIED CHINESE)
4-171-810-21
4-171-810-21
(KOREAN)
* 4-171-810-41 (ENGLISH, ARABIC, PERSIAN)
Rechargeable battery pack (NP-BN1)
(Note)
(Note)
A/V cable
1-834-312-31
1-834-312-31
Wrist strap
2-050-981-01 (Gray) (SILVER)
2-050-981-11 (Black) (BLACK,RED,BLUE)
2-050-981-01 (Gray) (SILVER)
2-050-981-11 (Black) (BLACK,RED,BLUE)
Dedicated USB cable
1-834-311-51
1-834-311-51
Note : This item is supplied with the unit as an accessory, but is
not prepared as a service part.
(Only for destination Japanese model)
日本国内については日本語のみが印刷での部品供給可能です。
日本国内については日本語のみが印刷での部品供給可能です。
Checking supplied accessories.
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Ver. 1.3 2010.03
DSC-W330_L2
2-8E
2-2. ELECTRICAL PARTS LIST
1-880-206-11 FPC-016
FLEXIBLE
BOARD
**********************
1-880-210-11 FPC-020
FLEXIBLE
BOARD
**********************
1-880-589-11
MA-465 FLEXIBLE BOARD
********************
(BT900 is not included in MA-465 flexible complete board.)
<
BATTERY
>
BT900
1-756-710-12
LITHIUM RECHARGEABLE BATTERY
A-1731-543-A ST-226 BOARD, COMPLETE
**********************
1-487-574-11
FLASH UNIT
<
CAPACITOR
>
* C002
1-112-746-11 CERAMIC CHIP 4.7uF
10%
6.3V
C003 1-100-611-91 CERAMIC
CHIP 22uF
20% 6.3V
* C005
1-116-456-11 CERAMIC CHIP 0.047uF 10%
350V
C006 1-164-850-11 CERAMIC
CHIP 10PF
0.5PF 50V
C008 1-100-761-21 CERAMIC
CHIP 0.01uF 10% 250V
* C010
1-114-582-11 CERAMIC CHIP 0.1uF
10%
16V
* C011
1-114-582-11 CERAMIC CHIP 0.1uF
10%
16V
C013 1-165-887-91 CERAMIC
CHIP 0.22uF 10% 6.3V
<
CONNECTOR
>
* CN001
1-817-828-81
CONNECTOR, FPC (ZIF) 25P
* CN002
1-820-031-51
CONNECTOR, FPC (LIF (NON-ZIF))
<
DIODE
>
D003
6-501-096-01
DIODE CRF02 (TE85R)
* D004
6-503-001-01
DIODE RR255M-400FJTR
D051
6-500-594-01
DIODE CL-196SYG-CD-T
* D052
6-502-862-01
DIODE CL-271TD2-C-TS
<
IC
>
IC001
6-712-975-01
IC BD4215NUV-E2
<
COIL
>
* L001
1-400-820-11 INDUCTOR
2.2uH
L003 1-400-342-21 INDUCTOR
10uH
L004 1-400-342-21 INDUCTOR
10uH
<
TRANSISTOR
>
*Q001 6-552-460-01 TRANSISTOR
RJP4006AGE
<
RESISTOR
>
R001 1-218-943-11 METAL
CHIP
150
5%
1/16W
R003 1-216-121-11 METAL
CHIP
1M
5%
1/10W
R004 1-218-989-11 METAL
CHIP
1M
5%
1/16W
R005 1-208-855-81 METAL
CHIP
47
0.5% 1/16W
R006 1-216-097-11 METAL
CHIP
100K
5%
1/10W
R007 1-218-948-11 METAL
CHIP
390
5%
1/16W
R008 1-218-929-11 METAL
CHIP
10
5%
1/16W
< SWITCH >
S051 1-786-819-22 TACTILE
SWITCH
S052 1-786-914-31 SWITCH,
TACTILE
<
TRANSFORMER
>
*T001 1-445-774-11 D.C.-D.C.CONVERTER
TRANSFORMER
^
A-1731-540-A SW-563 BOARD, COMPLETE
**********************
< CONNECTOR >
* CN101
1-816-654-61
FFC/FPC CONNECTOR (LIF) 6P
< COMPOSITION CIRCUIT BLOCK >
RB101 1-234-376-11 RES,
NETWORK 2.2K
(1005X4)
RB102 1-234-376-11 RES,
NETWORK 2.2K
(1005X4)
< SWITCH >
S101 1-786-914-31 SWITCH,
TACTILE
S102 1-786-914-31 SWITCH,
TACTILE
S103 1-786-914-31 SWITCH,
TACTILE
S104 1-786-914-31 SWITCH,
TACTILE
S105 1-786-914-31 SWITCH,
TACTILE
S106 1-786-914-31 SWITCH,
TACTILE
S107 1-786-914-31 SWITCH,
TACTILE
S108 1-786-914-31 SWITCH,
TACTILE
S109 1-786-914-31 SWITCH,
TACTILE
S110 1-786-914-31 SWITCH,
TACTILE
S111
1-786-707-11
SWITCH, DETECTION (SMD)
^
MA-465
ST-226
SW-563
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Please refer to LEVEL 3 about the ELECTRICAL PARTS LIST of
CD-774 and SY-243.
CD-774 and SY-243.
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
FPC-016
FPC-020
3-1E
3. ASSEMBLY
Assembly-5:
Attaching Method of LCD Cushion (620),
LCD Window (620)
LCD Window (620)
Apply LCD Cushion (620).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Fit LCD Window (620) into the flame of
Cabinet (Rear) Assy and attach it on LCD Cushion (620).
Cabinet (Rear) Assy and attach it on LCD Cushion (620).
Attach Cabinet (Rear) Assy to set.
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Cushion (620)
LCD Window (620)
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.
LCD Cushion (620)
LCD
Align corner of
LCD Cushion (620)
with corner of LCD.
LCD Cushion (620)
with corner of LCD.
Tab
Releace Paper
Putting standard
Assembly-4:
Precaution During of Cabinet (Rear) Assy
Instalation.
Instalation.
Align the slide switch at the camera mode,
when install Cabinet (Rear) Assy.
when install Cabinet (Rear) Assy.
Slide Switch
Cabinet (Rear) Assy
Route the speaker harness and microphone
harness as shown below.
harness as shown below.
Assembly-3:
Precaution During of MA-465 Flexible
Board Installation.
Board Installation.
Microphone
Harness
Harness
MA-465 Flexible
Board
Board
Speaker
Harness
Harness
SY
-243
Assembly-2:
Insulationg Sheet (670) Putting Position
Insulating Sheet (670)
SY-243 Board
Insulating Sheet (670)
Assembly-1:
Installation Method of Battery
Tarminal Board
Tarminal Board
Insert the battery terminal board into a slit in
Remove the battery terminal board by bending
the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
BT holder to install.
* Battery terminal board is attached with notch for
installation.
* Battery terminal board is attached with notch for
installation.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Battery Tarminal Board
Notch
Battery terminal board
Notch
Battery terminal
board
board
Notch
DSC-W330_L2
Click on the first or last page to see other DSC-W330 (serv.man2) service manuals if exist.