Sony DSC-W300 (serv.man3) Service Manual ▷ View online
6-8
DSC-W300_ADJ
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-11 will appear. On this screen, select each ad-
justment section.
screen in Fig. 6-1-11 will appear. On this screen, select each ad-
justment section.
Fig. 6-1-11
1
[Connecting the Equipment] button
A connection diagram of the equipment is displayed.
A connection diagram of the equipment is displayed.
2
[CONNECT] button
The mode of Camera is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 – 0 is enabled.
The mode of Camera is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 – 0 is enabled.
3
[END] button
The mode of Camera is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.
The mode of Camera is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.
4
[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.
The “DESTINATION DATA WRITE” screen appears.
5
[USB SERIAL N0. INPUT] button
The “USB SERIAL No. INPUT” screen appears.
The “USB SERIAL No. INPUT” screen appears.
6
[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
7
[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
8
[LCD SYSTEM ADJUSTMENT] button
The “LCD SYSTEM ADJUSTMENT” screen appears.
The “LCD SYSTEM ADJUSTMENT” screen appears.
9
[SERVICE MODE] button
The “SERVICE MODE” screen appears.
The “SERVICE MODE” screen appears.
0
[DATA BACKUP] button
The “DATA BACKUP” screen appears.
The “DATA BACKUP” screen appears.
qa
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
qs
[Adjust item] button
“Adjusting items when replacing main parts and boards” table
is displayed.
“Adjusting items when replacing main parts and boards” table
is displayed.
1-2.
ADJUSTMENT PROGRAM
The DSC-W300 is adjusted by the Automatic Adjustment Program.
The Automatic Adjustment Program enters automatically via the
SeusEX the adjustment operations that were formerly entered
manually by the adjustment remote commander (some items may
be adjusted by manual operation on the operation screen of the
SeusEX).
The Automatic Adjustment Program enters automatically via the
SeusEX the adjustment operations that were formerly entered
manually by the adjustment remote commander (some items may
be adjusted by manual operation on the operation screen of the
SeusEX).
1.
Precautions When Using Automatic Adjustment
Program
Program
1) The Automatic Adjustment Program writes the adjustment re-
sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusEX. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusEX operates.
cation with the camera via the SeusEX. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusEX operates.
2) The Automatic Adjustment Program cannot be used when the
SEUS or the SeusCam is running. Exit the SEUS or the
SeusCam before using the Automatic Adjustment Program.
SeusCam before using the Automatic Adjustment Program.
3) The SeusEX must be already started on the PC when using the
Automatic Adjustment Program. With the SeusEX not started,
some adjustment items will take time in adjustment.
some adjustment items will take time in adjustment.
4) The program run time may vary depending on the environ-
ment of the personal computer used.
2.
Start of Automatic Adjustment Program
Double-click the application file (DSC-W300 Auto-Adj
Ver_1.4r05.exe), and the Automatic Adjustment Program will start.
Ver_1.4r05.exe), and the Automatic Adjustment Program will start.
3
5
4
7
6
2
1
qs
9
0
8
qa
Ver. 1.4 2009.06
6-9
DSC-W300_ADJ
4.
Setting of Adjustment Mode
Before performing the adjustment, “Setting of Adjustment Mode”
is required.
is required.
[Setting method]
1) Connect the Camera to the PC with a USB cable, and turn on
1) Connect the Camera to the PC with a USB cable, and turn on
the power switch.
2) Start the Automatic Adjustment Program, and click the [Con-
nect] button on the Main Menu screen.
3) Turn off the power button of the set when the following mes-
sage is displayed.
4) Once turn off a set completely by pulling a “DC In Jack” (Or
you can pull a Multi-connector).
5) Connect a “DC In Jack” again and turn on a set by the power
button of a body.
Click the [OK] button on the message screen when the set
started.
Click the [OK] button on the message screen when the set
started.
6) Upon successful completion of the settings in the Adjustment
Mode, the operation of each button on the Main Menu screen
is enabled.
is enabled.
5.
Release of Adjustment Mode
To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.
ment Mode”.
[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
sage window to exit the Automatic Adjustment Program.
Note:
The Camera switches to the normal mode by turning
off and on the power switch. After the adjustment fin-
ished, turn off and on again the power switch of the
Camera to confirm that the USB mode screen is dis-
played.
off and on the power switch. After the adjustment fin-
ished, turn off and on again the power switch of the
Camera to confirm that the USB mode screen is dis-
played.
Ver. 1.3 2008.08
6-10
DSC-W300_ADJ
Japanese
English
French
German
Spanish
Italian
Portuguese
Simplified
Chinese
Traditional
Chinese
Dutch
Russian
Korean
Persian
Arabic
Thai
Melayu
Swedish
Norwegian
Danish
Finnish
Polish
Czech
Hungarian
Turkish
Greek
J1
J
z
NTSC
JE3
JE
z
a
a
a
a
a
a
a
a
a
PAL
U2
US
z
a
a
a
a
a
NTSC
CA2
CND
z
a
a
a
a
a
NTSC
CEE2
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
PAL
CEE8
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE9
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
E15
z
a
a
a
a
a
a
a
a
a
PAL
E32
z
a
a
a
a
a
a
a
a
a
PAL
E33
a
z
a
a
a
a
a
a
a
a
NTSC
TH6
Thai
a
a
a
a
a
a
a
a
z
a
PAL
AU2
AUS
z
a
a
a
a
a
PAL
HK1
HK
z
a
a
a
a
a
a
a
a
a
PAL
CN2
CH
a
a
a
z
a
a
a
a
a
a
PAL
KR2
KR
a
a
a
a
a
z
a
a
a
a
NTSC
AR2
AR
a
z
a
a
a
a
a
a
a
a
NTSC
BR1
BR
a
a
z
a
a
a
a
a
a
a
NTSC
z
: INITIAL LANGUAGE
E
VIDEO OUT
Default
AEP
DESTINATION
AREA
SELECTABLE LANGUAGE
1-3.
DESTINATION DATA WRITE
Note:
The DESTINATION DATA WRITE cannot be set with other
than the Service board.
than the Service board.
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-12 will appear.
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-12 will appear.
Fig. 6-1-12
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Destination Check button
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
3
Destination List
Select the written destination.
Select the written destination.
4
[Data Write] button
Write the destination data to the camera.
Write the destination data to the camera.
3.
Selectable Language Table
2.
Destination Data Write
[Writing method]
1) Select the written destination with the Destination list.
1) Select the written destination with the Destination list.
2) Click the [Data Write] button.
3) Following message will be appeared after completing data
writing.
4) After the destination data writing completed, click the Desti-
nation Check button to check the destination
Table 6-1-2
4
2
1
3
Ver. 1.1 2008.05
6-11
DSC-W300_ADJ
1.
Function of Each Button on USB Serial No. Input
Screen
Screen
Click the [USB SERIAL No. INPUT] button on the Main Menu
screen, and “USB SERIAL No. INPUT” screen in Fig. 6-1-13
will appear.
screen, and “USB SERIAL No. INPUT” screen in Fig. 6-1-13
will appear.
Fig. 6-1-13
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Display area
The “PRODUCT ID” and “SERIAL No.” are displayed.
The “PRODUCT ID” and “SERIAL No.” are displayed.
3
[Check Serial] button
The USB SERIAL No. data is read from the camera and dis-
played in the display area.
The USB SERIAL No. data is read from the camera and dis-
played in the display area.
4
[Read and Save] button
The USB SERIAL No. data is read from the camera and saved
in PC as a file.
Default file name is as follows:
The USB SERIAL No. data is read from the camera and saved
in PC as a file.
Default file name is as follows:
5
[Load and Write] button
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camera.
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camera.
6
Input area
Enter the “SERIAL No.”.
For the “PRODUCT ID”, the last 5 characters of model
name are fixed. For the “SERIAL No.”, read it from the label
on the camera body and enter it.
Enter the “SERIAL No.”.
For the “PRODUCT ID”, the last 5 characters of model
name are fixed. For the “SERIAL No.”, read it from the label
on the camera body and enter it.
7
[Write Manually] button
The USB SERIAL No. data entered in the input area is written
to the camera.
The USB SERIAL No. data entered in the input area is written
to the camera.
1-4.
USB SERIAL No. INPUT
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model
name) and SERIAL No. into the screen and write them.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model
name) and SERIAL No. into the screen and write them.
DSC-W300_SERIAL_xxxxxxxx_yyyymmdd.dat
Date
USB serial number
Data name
USB serial number
Data name
5
3
4
2
7
6
1
Click on the first or last page to see other DSC-W300 (serv.man3) service manuals if exist.