Sony DSC-W30 (serv.man3) Service Manual ▷ View online
6-1
DSC-W30_ADJ
SEÇÃO 6
AJUSTES
ANTES DE INICIAR OS AJUSTES
Precaution on Replacing the SY-143 Board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data and Exif Model Data Check” and “Initial Language Data Check” mentioned
below, and also the adjustment items necessary after SY Board replacement.
VIDEO OUT Default Data and Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replacing etc., check the data setting (VIDEO OUT Default Data, Exif
Model Data) is right. If not, rewrite to the right value.
When the data has changed because of board replacing etc., check the data setting (VIDEO OUT Default Data, Exif
Model Data) is right. If not, rewrite to the right value.
VIDEO OUT Default Data
Exif Model Data
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set the VIDEO OUT Default Data.
3) Select page: 8F, address: E5 and E6, and set the Exif Model Data.
4) Click
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set the VIDEO OUT Default Data.
3) Select page: 8F, address: E5 and E6, and set the Exif Model Data.
4) Click
[Save]
on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
Address
8D
Page
4F
Data
NTSC
00
PAL
01
Address
E5
E6
Page
8F
8F
Data
DSC-W30
33
30
DSC-W40
34
30
6-2
DSC-W30_ADJ
Initial Language Data Check
If the SY-143 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.
as to set same initial language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page
Address
Data
Language
GP1
GP2
GP3
GP4
4F
8C
00
English
z
z
z
01
Japanese
z
04
Spanish
z
z
06
Portugal
z
08
Simplified Chinese
z
0B
Russian
z
0D
Korean
z
Note:
GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click
[Save]
on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
6-3
DSC-W30_ADJ
Method for Copying or Erasing the Data in Internal Memory
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)
internal memory.)
Method for copying the data in internal memory
Method for formatting the internal memory
Note 1:
When replacing the SY-143 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-143 board or the IC202 on the SY-143 board, execute formatting and initialize the
internal memory after replacement.
internal memory after replacement.
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v, then press z.
Copying starts.
• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files
using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or
possibly corrupting the data.
possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool).
• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a
• Even if you copy data, a
(Print order) mark is not copied.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with
The default settings are marked with
.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
2 Select [OK] with v, then press z.
The format is complete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
6-4
DSC-W30_ADJ
1-1. ITENS DOS AJUSTES QUANDO TROCAR AS PLACAS E PRINCIPAIS PARTES
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support the “Initialization of data”. Perform it manually.
Note 2:
Use the AWB Adjustment Program (W30W50AwbAdjustment.exe).
Note 3:
When replacing the SY-143 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-143 board or the IC202 on the SY-143 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Note 5:
When replacing the SY-143 board, perform “VIDEO OUT Default Data and Exif Model Data Check” and “Initial Language Data
Check” after replacement.
Check” after replacement.
Table 6-1-1
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Backlight unit
(AF illumination LED)
(Internal memory) (Note 3)
(CCD signal process, Timing gen.)
(Video amp.)
LCD901
D901
D003
IC202
IC301
IC602
(COMPLETE)
(COMPLETE) (Note 3, 4, 5)
Flash unit
LCD block
LCD block
ST-133 board
SY-143 board
SY-143 board
SY-143 board
ST-133 board
SY-143 board
VIDEO adjustment
Video output level adj.
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 5
Strobe adj.
z
z
z
z
z
CAMERA adjustment 6
Auto focus illumination check
z
z
z
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
LCD adjustment
z
CAMERA adjustment 3
CAMERA adjustment 4
z
Lens block
CCD block assy (Including CD-604 flexible board and CCD imager)
z
z
z
z
z
z
z
