Sony DSC-W30 / DSC-W40 (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
LEVEL
1
Link
SPECIFICATIONS
SERVICE NOTE
ACCESSORIES
INSTRUCTION MANUAL
MODEL INFORMATION TABLE
Link
Revision History
Revision History
Sony EMCS Co.
DSC-W30/W40_L1
Ver. 1.2 2007.06
DIGITAL STILL CAMERA
2007F0500-1
© 2007.6
Published by Kohda TEC
9-876-935-41
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
DSC-W30/W40
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
Japanese Model
Tourist Model
Photo: DSC-W30/Silver
— 2 —
DSC-W30/W40_L1
SPECIFICATIONS
Camera
[System]
Image device
7.18 mm (1/2.5 type) color
CCD, Primary color filter
CCD, Primary color filter
Total pixel number of camera
Approx. 6 183 000 pixels
Effective pixel number of camera
Approx. 6 003 000 pixels
Lens
Carl Zeiss Vario-Tessar
3
3
× zoom lens
f = 6.3 – 18.9 mm (38 –
114 mm when converted to a
35 mm still camera)
F2.8 – 5.2
114 mm when converted to a
35 mm still camera)
F2.8 – 5.2
Exposure control Automatic exposure, Scene
Selection (7 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent,
Flash
Fluorescent, Incandescent,
Flash
File format (DCF compliant)
Still images: Exif Ver. 2.21
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
Recording media Internal Memory (32 MB)
“Memory Stick Duo”
Flash
Recommended distance (ISO
set to Auto): approx. 0.2 m to
4.2 m (7 7/8 inches to 13 feet
9 3/8 inches) (W)/approx.
0.3 m to 2.2 m (11 7/8 inches to
7 feet 2 5/8 inches) (T)
set to Auto): approx. 0.2 m to
4.2 m (7 7/8 inches to 13 feet
9 3/8 inches) (W)/approx.
0.3 m to 2.2 m (11 7/8 inches to
7 feet 2 5/8 inches) (T)
[Input and Output connectors]
A/V OUT jack (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω,
unbalanced, sync negative
Audio: 327 mV (at a 47 k
Audio: 327 mV (at a 47 k
Ω
load)
Output impedance 2.2 k
Output impedance 2.2 k
Ω
USB jack
mini-B
USB communication
Hi-Speed USB (USB 2.0
compliant)
compliant)
[LCD screen]
LCD panel
5.1 cm (2.0 type) TFT drive
Total number of dots
84 960 (354
×240) dots
[Power, general]
Power
Rechargeable battery pack NP-
BG1, 3.6 V
BG1, 3.6 V
AC-LS5K AC Adaptor (not
supplied), 4.2 V
supplied), 4.2 V
Power consumption (during shooting with the
LCD screen on)
1.0W
1.0W
Operating temperature
0 to 40
°C (32 to 104°F)
Storage temperature
–20 to +60
°C (–4 to +140°F)
Dimensions
89.8
×59.0×22.9 mm
(3 5/8 inches
× 2 3/8 inches ×
29/32 inches) (W/H/D,
excluding protrusions)
excluding protrusions)
Mass
DSC-W40
Approx. 186 g (6.6 oz)
(including NP-BG1 battery
pack and neck strap, etc.)
(including NP-BG1 battery
pack and neck strap, etc.)
DSC-W30
Approx. 153 g (5.4 oz)
(including NP-BG1 battery
pack and wrist strap, etc.)
(including NP-BG1 battery
pack and wrist strap, etc.)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching III
Compatible
PictBridge
Compatible
BC-CSG battery charger
Power requirements
AC 100 to 240 V, 50/60 Hz,
2 W
2 W
Output voltage
DC 4.2 V, 0.25 A
Operating temperature
0 to 40
°C (32 to 104°F)
Storage temperature
–20 to +60
°C (–4 to +140°F)
Dimensions
Approx. 62
× 24 × 91 mm
(2 1/2
× 31/32 ×3 5/8 inches)
(W/H/D)
Mass
Approx. 75 g (2.7 oz)
Rechargeable battery pack NP-BG1
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage DC 3.6 V
Capacity
3.6 Wh (960 mAh)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-W30/W40_L1
Model
DSC-W30/Silver
DSC-W30/White
DSC-W30/Blue
DSC-W40/Black
Destination
US, CND, AEP, UK,
US, CND, AEP, E,
US, CND, AEP, E,
CND, AEP, UK, E,
E, AUS, HK, CH,
AUS, HK, KR, J, JE
AUS, HK, KR, J, JE
AUS, KR
KR, AR, BR, J, JE
CONTROL SW BLOCK
SW110T
SW110T
SW110T
SW120TB
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Model information table
• Abbreviation
AR : Argentine model
AUS : Australian model
BR
AUS : Australian model
BR
: Brazilian model
CH : Chinese model
CND : Canadian model
EE
CND : Canadian model
EE
: East European model
HK : Hong Kong model
J
J
: Japanese model
JE
: Tourist model
KR : Korea model
NE
NE
: North European model
— 4 —
DSC-W30/W40_L1
Description on Self-diagnosis Display
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
SERVICE NOTE
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory Stick” or internal
memory.
memory.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
“Memory Stick” or internal memory is
unformatted.
unformatted.
“Memory Stick” is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Turn the power off and on again.
Trouble with internal memory.
When failed in the focus and zoom
initialization.
initialization.
Checking of lens drive circuit.
INTERNAL MEMORY ERROR
—
Checking of flash unit or replacement
of flash unit.
of flash unit.
Abnormality when flash is being
charged.
charged.
Method for Copying the Data in Internal Memory
The data can be copied by the operations on the Setup screen.
Copies all images in the internal memory to a “Memory Stick Duo”.
1 Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v, then press z.
Copying starts.
• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files
using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or
possibly corrupting the data.
possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool).
• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a
• Even if you copy data, a
(Print order) mark is not copied.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
Display