Sony DSC-TX66 (serv.man2) Service Manual ▷ View online
DSC-TX66_L2
3-1
3. ASSEMBLY
Assembly-1: The Method of attachment of RL-114
Flexible Board.
1
Fold dotted line parts of the RL-114 flexible
board as shown in figure.
board as shown in figure.
2
Attach the RL-114 flexible board as shown in figure.
3
Route the RL-114 flexible board as shown in figure.
Mountain fold
RL-114 Flexible Board
Mountain fold
Valley fold
Valley fold
Mountain fold
Rib
Rib
Boss
Boss
Assembly-2: Precaution During of Lens Flexible
Board Removing.
Note on assembling (About the work to the battery)
Connector
Very weak
Connector
Pickup this part
Lens Flexible Board
Very weak
Do not hold the following part and remove Lens
flexible board.
flexible board.
Hold the Lens Block as shown figure.
CD-829 Board
Sensor
Motor
Lens
Very weak
Very weak
Very weak
Very weak
Motor
Very weak
Do not hold the following part.
Assembly-3: Caution for Handling the Lens Device.
• IR cut coating surface
The red coating is reflected.
The red coating is reflected.
• The other surface
The red coating is
not reflected.
The red coating is
not reflected.
• Side view
The red belt
is seen.
The red belt
is seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter Block
[IR Cut Coated Side]
[The Other Side]
The one side of the Optical Filter Block has treated
How to distinguish the side of Optical Filter Block
facing to Lens Device.
facing to Lens Device.
with IR cut coating.
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
Mount the Optical Filter Block facing the IR cut
coated side to the lens device.
Distinguish the IR cut coated side from the other by
applying the fluorescent light to
the Optical Filter Block in the dark place
(cut off the outside light).
DSC-TX66_L2
3-2E
Assembly-4: Precaution During of Flexible Retainer
Sheet.
Flexible Retainer Sheet
Chips
HDMI Connector
Assembly-5: The Method of folding of the Flash Unit
Flexible Board.
Valley fold
Valley fold
Mountain fold
Flash Unit Flexible Board
Mountain fold
G12 Protection Sheet is supplied with the LSV-1501A (SERVICE).
This part is used to protect the LSV-1501A (SERVICE).
Remove this part when replacing the LSV-1501A (SERVICE).
And install the G10 Seal (1500).
This part is used to protect the LSV-1501A (SERVICE).
Remove this part when replacing the LSV-1501A (SERVICE).
And install the G10 Seal (1500).
Install the G10 Seal (1500)
Remove the G12 Protection Seal
LSV-1501A (Service)
LEVEL
2
DSC-TX66_L2
Sony Corporation
9-834-643-81
SUPPLEMENT-1
File this supplement with the service manual.
• Revision of EXPLODED VIEWS
• Change of EXPLODED VIEWS
• Change of EXPLODED VIEWS
(12-331)
SERVICE MANUAL
Ver. 1.5 2013.02
2013B08-1
© 2013.02
Published by Sony Techno Create Corporation
• Addition of PANEL ADHESIVE SHEET and change of BT HINGE SHAFT
This Supplement-1 describes addition of PANEL ADHESIVE SHEET and change of BT HINGE SHAFT.
When adding a PANEL ADHESIVE SHEET, follow the instructions provided here.
This Supplement-1 describes addition of PANEL ADHESIVE SHEET and change of BT HINGE SHAFT.
When adding a PANEL ADHESIVE SHEET, follow the instructions provided here.
Note : Please refer to Ver.1.5 of SERVICE MANUAL (9-834-643-36) for the revision of EXPLODED VIEWS.
2. REPAIR PARTS LIST
2-1. EXPLODED VIEWS
2-1-3. BATTERY HOLDER SECTION
-
: Points changed portion
&
: Points added portion
Page
Former
New
2-5
ns: not supplied
111
110
109
112
113
107
#82
108
106
114
114
#82
ns
ns
ns
ns
Ref. No.
Part No.
Description
106
A-1863-923-A
BTH (200) S BLOCK ASSY (SILVER)
106
A-1863-924-A
BTH (200) N BLOCK ASSY (GOLD)
106
A-1863-925-A
BTH (200) P BLOCK ASSY (PINK)
106
A-1863-926-A
BTH (200) V BLOCK ASSY (VIOLET)
106
A-1863-927-A
BTH (200) W BLOCK ASSY (WHITE)
106
A-1863-928-A
BTH (200) R BLOCK ASSY (RED)
113
4-287-832-01
SHAFT, BT HINGE
ns: not supplied
111
110
109
112
113
(Note 1)
107
#82
108
106
(Note 1)
114
114
#82
ns
ns
ns
ns
115
(Note 1, 2)
Ref. No.
Part No.
Description
106
A-1863-923-B
BTH (200) S BLOCK ASSY (SILVER) (Note1)
\
106
A-1863-924-B
BTH (200) N BLOCK ASSY (GOLD) (Note1)
106
A-1863-925-B
BTH (200) P BLOCK ASSY (PINK) (Note1)
106
A-1863-926-B
BTH (200) V BLOCK ASSY (VIOLET) (Note1)
106
A-1863-927-B
BTH (200) W BLOCK ASSY (WHITE) (Note1)
106
A-1863-928-B
BTH (200) R BLOCK ASSY (RED) (Note1)
\
\
113
4-287-832-02
SHAFT, BT HINGE (Note1)
115
4-425-566-01
PANEL ADHESIVE SHEET (Note1, 2)
+
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Chinese Model
Korea Model
Japanese Model
Tourist Model
DSC-TX66
DSC-TX66_L2
– 2 –
&
: Points added portion
Page
Former
New
2-5
+
When attaching the PANEL ADHESIVE SHEET (Ref. No. 115), replace the
BT HINGE SHAFT (Ref. No. 113) with a part (4-287-832-02).
However, when the suffix of the BTH BLOCK ASSY (Ref. No. 106) is newer
than "-B", the BT HINGE SHAFT needs not to be replaced.
BT HINGE SHAFT (Ref. No. 113) with a part (4-287-832-02).
However, when the suffix of the BTH BLOCK ASSY (Ref. No. 106) is newer
than "-B", the BT HINGE SHAFT needs not to be replaced.
Determine that the BTH BLOCK ASSY is new type or old type by the suffix
of the part number or the profile of the BT HINGE SHAFT.
of the part number or the profile of the BT HINGE SHAFT.
Old type
New type
Note 1: Notes on attaching the PANEL ADHESIVE SHEET
Ref. No. 115
の PANEL ADHESIVE SHEET を貼り付けるときは，
Ref. No. 113
の BT HINGE SHAFT を 4-287-832-02 の部品へ
交換してください。
ただし，Ref. No. 106 のBTH BLOCK ASSY が末尾「-B」より新しい
場合は，BT HINGE SHAFT を交換する必要はありません。
ただし，Ref. No. 106 のBTH BLOCK ASSY が末尾「-B」より新しい
場合は，BT HINGE SHAFT を交換する必要はありません。
BTH BLOCK ASSY
は部品番号の末尾，または BT HINGE SHAFT
の形状で新旧を見分けてください。
旧
新
Note 1: PANEL ADHESIVE SHEET
取り付け時の注意事項
PANEL ADHESIVE SHEET
Attach the PANEL ADHESIVE SHEET according to the following standard.
The PANEL ADHESIVE SHEET
does not overlap the bent portion
of the plate.
does not overlap the bent portion
of the plate.
The PANEL ADHESIVE SHEET
does not overlap the plate edge.
does not overlap the plate edge.
The PANEL ADHESIVE SHEET does not
overlap the extended line of the plate edge.
overlap the extended line of the plate edge.
Note 2: PANEL ADHESIVE SHEET putting position
PANEL ADHESIVE SHEET
PANEL ADHESIVE SHEET
は下記の基準で貼り付けてください。
板金折り曲げ部に
掛からないこと
掛からないこと
板金端に掛からないこと
板金端の延長線上に
掛からないこと
掛からないこと
Note 2: PANEL ADHESIVE SHEET
取り付け位置
