Sony DSC-T9 (serv.man4) Service Manual ▷ View online
6-35
DSC-T9_ADJ
Function
When data = 00 When data = 01 When data = 02
Shutter button
(XAE LOCK SW)
(XAE LOCK SW)
OFF
ON
ON
(CONTROL SWITCH BLOCK (RL51800) S004)
Shutter button
(XSHUTTER SW)
(XSHUTTER SW)
OFF
OFF
ON
(CONTROL SWITCH BLOCK (RL51800) S004)
4.
LED Check
Page 80
Address 12
Page 8E
Address FE
Using method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 8E, address: FE, and set data: 20.
3) Select page: 80, address: 12, and set data: 01.
4) Check that all LED are lit.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 8E, address: FE, and set data: 20.
3) Select page: 80, address: 12, and set data: 01.
4) Check that all LED are lit.
• SELF TIMER/AF ILLUMINATOR
• MS ACCESS
5) Select page: 80, address: 12, and set data: 00.
6) Select page: 8E, address: FE, and set data: 00.
7) Select page: 00, address: 01, and set data: 00.
8) Click [Disconnect] on the SEUS screen.
9) Disconnect the USB cable.
10) Turn off the power.
6) Select page: 8E, address: FE, and set data: 00.
7) Select page: 00, address: 01, and set data: 00.
8) Click [Disconnect] on the SEUS screen.
9) Disconnect the USB cable.
10) Turn off the power.
5.
Switch Check (1)
Page 80
Address 13
Using method:
1) Select page: 80, address: 13.
2) By discriminating the read data, the state of the switches can
1) Select page: 80, address: 13.
2) By discriminating the read data, the state of the switches can
be discriminated.
6.
Switch Check (2)
Page 40
Address 5A
Using method:
1) Select page: 40, address: 5A.
2) By discriminating the read data, the state of the switches can
1) Select page: 40, address: 5A.
2) By discriminating the read data, the state of the switches can
be discriminated.
Function
When data = FF or 00
When data = 55
Steady shot button
OFF
ON
(CONTROL SWITCH BLOCK (RL51800) S003)
6-36
DSC-T9_ADJ
7. Switch Check (3)
Page 20
Addresses A0, A1
Using method:
1) Select page: 20, addresses: A0 and A1.
2) By discriminating the read data, the pressed key can be dis-
1) Select page: 20, addresses: A0 and A1.
2) By discriminating the read data, the pressed key can be dis-
criminated.
8. Mode Switch Check
Page 20
Addresses A3
Using method:
1) Select page: 20, addresses: A3.
2) By discriminating the read data, the state of the mode switch can be discriminated.
1) Select page: 20, addresses: A3.
2) By discriminating the read data, the state of the mode switch can be discriminated.
9. Self Diagnosis Code
6-36E
Note:
After repair, be sure to execute the “Initialize” of the setup screen.
Address
Data
2B to 31
49 to 53
60 to 6C
A3
MOVIE
PLAY
CAMERA
(MODE DIAL0)
(BT-029 flexible)
(BT-029 flexible)
(BT-029 flexible)
(IC301 AB14 )
(S005)
(S005)
(S005)
Address
Data
00 to 0D
2C to 33
4C to 55
76 to 84
A1 to B4
C4 to DB
FF
A0
CONTROL UP
CONTROL RIGHT CONTROL DOWN CONTROL LEFT
CONTROL SET
(KEY AD0)
(SW51800 block)
(SW51800 block)
(SW51800 block)
(SW51800 block)
(SW51800 block)
_
No key input
(IC301 AA13)
(S001)
(S002)
(S003)
(S004)
(S006)
A1
ZOOM T
ZOOM W
SCREEN DISPLAY
MENU
IMAGE SIZE/
SLIDE SHOW
(KEY AD1)
(SW51800 block)
(SW51800 block)
ON/OFF
(SW51800 block)
DELETE
(SW51800 block)
No key input
(SW51800 block)
(SW51800 block)
(IC301 W15)
(S005)
(S007)
(S008)
(S009)
(S010)
(S011)
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory Stick” or internal
memory.
memory.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
“Memory Stick” or internal memory is
unformatted.
unformatted.
“Memory Stick” is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
Checking of flash unit or replacement
of flash unit. (Note)
of flash unit. (Note)
Abnormality when flash is being
charged.
charged.
Trouble with internal memory.
Turn the power off and on again.
When failed in the focus zoom
initialization.
initialization.
INTERNAL MEMORY ERROR
_
E:62:ss
Inspect angular velocity sensor
peripheral circuits.
peripheral circuits.
Steady shot function does not work well.
Revision History
Reverse
DSC-T9_ADJ
Ver.
1.0
1.1
1.2
Date
2005.10
2005.11
2007.08
History
Official Release
Correction-1
(C1)
(C1)
Supplement-1
(S1 DI07-045)
Contents
—
• Correction of the Before starting adjustment
S.M. correction:
S.M. correction:
Page 6-1, Page 6-2,
Page 6-3, Page 6-4
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.0r01 into
Ver_1.2r02.
has been changed from Ver_1.0r01 into
Ver_1.2r02.
• Addition of “DESTINATION DATA
WRITE”
• Addition of Note for Flange Back Adjust-
ment Jig
• Addition of “How to read the sensitivity
data of angular velocity sensor”
S.M. Rev.
issued
—
Yes
Yes
987691153.pdf
Revision History
Reverse
DSC-T9_ADJ
Ver.
1.0
1.1
1.2
Date
2005.10
2005.11
2007.08
History
Official Release
Correction-1
(C1)
(C1)
Supplement-1
(S1 DI07-045)
Contents
—
• Correction of the Before starting adjustment
S.M. correction:
S.M. correction:
Page 6-1, Page 6-2,
Page 6-3, Page 6-4
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.0r01 into
Ver_1.2r02.
has been changed from Ver_1.0r01 into
Ver_1.2r02.
• Addition of “DESTINATION DATA
WRITE”
• Addition of Note for Flange Back Adjust-
ment Jig
• Addition of “How to read the sensitivity
data of angular velocity sensor”
S.M. Rev.
issued
—
Yes
Yes
987691153.pdf
