Sony DSC-T9 (serv.man12) Service Manual ▷ View online
Auto-ADJ
SERVICE MANUAL
DSC-T9_ADJ
Ver 1.1 2005.11
DSC-T9
Sony EMCS Co.
9-876-911-91
2005K0500-1
© 2005.11
Published by DI Technical Support Department
CORRECTION-1
We will inform you that there are printing errors
in the service manual previously issued.
• Correction of the Before starting adjustment
— 2 —
DSC-T9_ADJ
!
: Points deleted portion.
SECTION 6
ADJUSTMENTS
Before starting adjustment
(Service Manual Page 6-1)
(The same model of the same destination)
(Machine to be repaired)
PC
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 when replacing board.
Perform either procedure 1 or procedure 2 when replacing board.
PC
Procedure 2
When the data cannot be saved due to defective flash memory, or when the flash memory cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a board
is replaced.
is replaced.
(Machine after a board is replaced)
(Machine before starting repair)
Download the data.
Save the data.
(Machine to be repaired)
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-5 for the items to be checked.)
^
— 3 —
DSC-T9_ADJ
&
: Points added portion.
+
Precaution on Replacing the SY-141 board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the
adjustment items necessary after SY Board replacement.
Display
