DOWNLOAD Sony DSC-T2 (serv.man4) Service Manual ↓ Size: 699.76 KB | Pages: 39 in PDF or view online for FREE

6-12

DSC-T2_ADJ

4) If the [End] button is clicked, the following message and screen

are displayed. Check that the sync signal level and burst level
of the video signals satisfies the specified value, and click the
[OK] button in the message.

5) If the [OK] button is clicked, “3. Release of Data Setting dur-

ing Video Adj.” will be executed.

6) Upon successful completion of all item the Composite Video

Level Adjustment, the following message is displayed. Click
the [OK] button.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Composite Video Level Adj.
3. Release of Data Setting during Video Adj.

[Adjusting method]
1) Click the [Start] button of the Composite Video Level Adj.
2) The Automatic Adjustment Program executes the “1. Data

Setting during Video Adj.”.

3) If “1. Data Setting during Video Adj.” completed successfully,

the following screen is displayed during the execution of “2.
Composite Video Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, click the
[End] button in the screen.

6-13

DSC-T2_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Component Out Y Level Adj.
3. Component Out Pb Level Adj.
4. Component Out Pr Level Adj.
5. Release of Data Setting during Video Adj.

[Adjusting method]
1) Click the [Start] button of the Component Video Level Adjust-

ment.

2) The Automatic Adjustment Program executes the “1. Data

Setting during Video Adj.”.

3) If “1. Data Setting during Video Adj.” completed successfully,

the following screen is displayed during the execution of “2.
Component Out Y Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the Y signal level satisfies the
specified value. After the adjustment, check that the sync level
of the Y signals satisfies the specified value, and click the [End]
button in the screen.

4) After that, the following screen is displayed during the execu-

tion of “3. Component Out Pb Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.

5) After that, the following screen is displayed during the execu-

tion of “4. Component Out Pr Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.

6) If the [End] button is clicked, “5. Release of Data Setting dur-

ing Video Adj.” will be executed.

7) Upon successful completion of all item the Component Video

Level Adjustment, the following message is displayed. Click
the [OK] button.

6-14

DSC-T2_ADJ

5

4

3

2

1

2

3

Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.

1

[To Menu] button
Return to the main menu.

2

[Preparation] button
Notes for adjustment or jigs used are displayed.

3

[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 9” starts.

4

[Reboot] button
When this button is clicked, the camera is rebooted.

5

[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

6-15

DSC-T2_ADJ

The adjustment items of camera system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into nine, camera adjustment 1 to 9. Clicking ei-
ther CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.

Dark Siemens star chart.

Block

Page

Address

CAMERA Adjustment 1

Hall Adj.

Not required

11

61

0E00 to 0E04,
0E08, 0E09

CAMERA Adjustment 2

Wide Limit Adj.

Not required

11

61

0F18, 0F19

CAMERA Adjustment 3

Flange Back Adj.

Siemens star chart with ND filter
for minipattern box (Note) or
Flange back adjustment jig

11

61

069C to 069F,
06CC,
06D8 to 06DF,
06E8 to 06EF,
0794 to 079D,
0F1C, 0F1D,
0F20, 0F24,
0F26 to 0F53

CAMERA Adjustment 4

Flange Back Check

Siemens star
(1.0m from front the lens)
(Illuminance: 200 to 400 lux)

-

-

-

F No. Compensation

11

61

0A4D to 0A4F,
0ABD to 0ABF,
0ACB

Measure Gain, LV Adj.

11

61

0961 to 0968

Mechanical Shutter Adj.

11

61

0980 to 09AD

AWB 3200K-5800K
Standard Data Input

11

61

0C00 to 0C21,
0C24 to 0C49

AWB 3200K-5800K Check

-

-

-

Color Reproduction
Adj. & Check

11

61

0C50 to 0C57

CCD White Defect
Compensation Check

11

61

0200 to 02FF

CCD Black Defect
Compensation Check

11

61

0000 to 00FF

CAMERA Adjustment 7

Strobe Adj.

Flash adjustment box (50 cm)

11

61

0C72 to 0C75

CAMERA Adjustment 8

Auto Focus Illumination Check

Flash adjustment box (50 cm)

11

61

0F10 to 0F15

CAMERA Adjustment 9

Angular Velocity Sensor
Sensitivity Adj.

Not required

11

61

0E10, 0E11

9 color chart
(Standard picture frame)

Clear chart
(Standard picture frame)

Clear chart
(Standard picture frame)

CAMERA Adjustment 5

CAMERA Adjustment 6

Adjusting Address

Button Name

Adjustment

Subject