DOWNLOAD Sony DSC-T2 (serv.man3) Service Manual ↓ Size: 403.86 KB | Pages: 7 in PDF or view online for FREE

DSC-T2_L1

2008E0800-1

  © 2008.05

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Hong Kong Model

Chinese Model

Korea Model

Argentine Model

Brazilian Model

Thai Model

Japanese Model

Tourist Model

Photo: Black

The components identified by
mark  0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.

Les composants identifiés par une
marque  0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.

Revised-2

Replace the previously issued
SERVICE MANUAL 9-852-223-42
with this Manual.

— 2 —

DSC-T2_L1

Audio output (Monaural)
USB communication

: Video output

Image device: 7.18 mm (1/2.5 type) color CCD, 

Primary color filter

Total pixel number of camera: 

Approx. 8 286 000 pixels

Effective pixel number of camera: 

Approx. 8 083 000 pixels

6.33  – 19.0 mm (38 – 114 mm when 
converted to a 35 mm still camera) F3.5 – 4.3

Exposure control: Automatic exposure, Scene 

Selection (10

  modes)

White balance: Automatic, Daylight, Cloudy, 

Fluorescent 1, 2, 3, Incandescent, Flash

File format (DCF compliant):

 

Still images: Exif Ver. 2.21 JPEG compliant  
Movies: MPEG1 compliant (Monaural)

Recording media: Internal Memory (approx. 

3.8 GB), “Memory Stick Duo”

Flash: Flash range (ISO sensitivity

(Recommended Exposure

approx. 0.25 to 2.8 m (9 7/8 inches to
9 feet 2 1/4 inches) (T)

Multi connector 

USB communication : Hi-Speed USB (USB 2.0 

compliant)

LCD panel: 6.7 cm (2.7 type) TFT drive

Power: Rechargeable battery pack NP-BD1, 3.6 V

NP-FD1 (not supplied), 3.6 V

AC-LS5K AC Adaptor (not supplied), 4.2 V

Power consumption (during shooting): 1.0 W 
Operating temperature: 0 to 40  ºC  (32 to 104  ºF)
Storage temperature: –20 to +60  ºC (–4 to +140  ºF)

protrusions)

Mass (including NP-BD1 battery pack, paint pen

and strap etc.): Approx. 156 g (5.5 oz)

 

Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible

Power requirements: AC 100 V

 

to 240 V, 50/60 Hz, 

2.2 W

Output voltage: DC 4.2 V, 0.33 A
Operating temperature: 0 to 40  ºC  (32 to 104  ºF)
Storage temperature: –20 to +60  ºC  (–4 to +140  ºF )

Mass: Approx. 75 g (2.7 oz)

Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 2.4 Wh (680 mAh)

Design and specifications are subject to change 
without notice.

Lens: Carl Zeiss Vario-Tessar 3

×

 zoom lens f =

Total number of dots: 230 400 (960

×

240) dots

Dimensions: 86.8

×

56.8

×

20.2 mm (3 1/2

×

 

2 1/4

×

13/16 inches) (W/H/D, excluding

Dimensions: Approx. 62

×

24

×

91 mm (2 1/2

×

 

31/32

×

3 5/8 inches) (W/H/D)

Index) set to Auto): approx. 0.1 to 3.2 m 

(4 inches to 10 feet 10 6 inches) (W)/

— 3 —

DSC-T2_L1

0

0

0

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

•

Keep the temperature of the soldering iron around 270

°

C

during repairing.

•

Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).

•

Be careful not to apply force on the conductor when soldering
or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

— 4 —

DSC-T2_L1

When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.

When problems occur while the unit is operating, the LCD screen
shows a 4-digit display consisting of an alphabet and numbers, which
blinks at 3.2 Hz. This 5-character display indicates the “repaired
by:”, “block” in which the problem occurred, and “detailed code”
of the problem.

0 0

3 2

C

Repaired by:

Refer to “3. Self-diagnosis Code Table”.

Indicates the appropriate
step to be taken.
E.g.
13 ....Format the “Memory Stick Duo”.
32 ....Turn on power again.

Block

Detailed Code

Blinks at 3.2 Hz

C : Corrected by customer
E : Corrected by service

engineer

LCD screen

C

C

Block

Function

1

3

3

2

Detailed

Code

0

1

0

1

Symptom/State

The internal memory has experienced a
format error.

“Memory Stick Duo” is unformatted.

“Memory Stick Duo” is broken.

“Memory Stick Duo” type error

The camera cannot read or write data
on the “Memory Stick Duo”.

Trouble with hardware

Correction

Format the internal memory.

Format the “Memory Stick Duo”.

Insert a new “Memory Stick Duo”.

Insert a supported “Memory Stick Duo”.

Turn the power off and on again, or taking out and inserting the
“Memory Stick Duo” several times.

Turn the power off and on again.

Self-diagnosis Code

Repaired b

y: