DOWNLOAD Sony DSC-S30 / DSC-S50 (serv.man2) Service Manual ↓ Size: 6.6 MB | Pages: 96 in PDF or view online for FREE

Compensate the unevenness of the iris meter sensitivity.

Mode

STILL

Subject

Clear chart
10 cm from the front of the lens)

Adjustment Page

F

Adjustment Address

29 to 2C

Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.

Adjusting method:
1)

Shoot the Clear chart with the zoom WIDE end.

2)

Select page: 0, address: 01, and set data: 01.

3)

Select page: 5, address: F1, and set data: FF.

4)

Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.

5)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

6)

Select page: 6, address: 01, set data: BB, and press the PAUSE
button.

7)

(The F No. standard data input is performed and the stan-
dard data is stored in page: F, address: 29 to 2C)

8)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.

2)

Select page: 5, address: F1, and set data: 00.

3)

Select page: D, address: 63, set data: 00, and press the PAUSE
button.

4)

Release the data setting performed at step 5).
(Refer to page 5-13)

5)

Select page: 0, address: 01, and set data: 00.

Adjust the period which the mechanical shutter is closed,
and compensate the exposure.

Mode

STILL

Subject

Clear chart

(10 cm from the front of the lens)

Adjustment Page

F

Adjustment Address

5A, 6C to 7F

Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.

Adjusting method:
1)

Shoot the Clear chart with the zoom WIDE end.

2)

Select page: 0, address: 01, and set data: 01.

3)

Select page: 5, address: F1, and set data: FF.

4)

Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.

5)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

6)

Select page: 6, address: 01, set data: AD, and press the PAUSE
button. (The mechanical shutter adjustment is performed and
the adjustment data is stored in page: F, address: 5A and 6C
to 7F)

7)

Select page: 6, address: 02, and check that the data is “01”.

8)

Select page: 6, address: AB, and check that the data is “00”.
(If the data other than “00”, mechanical shutter adjustment
has errors)

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.

2)

Select page: 5, address: F1, and set data: 00.

3)

Select page: D, address: 63, set data: 00, and press the PAUSE
button.

4)

Release the data setting performed at step 5).
(Refer to page 5-13)

5)

Select page: 0, address: 01, and set data: 00.

Mode

STILL

Subject

Color bar chart

(Color reproduction adjustment frame)

Measurement Point

Video terminal of A/V OUT jack

(75 

Ω

 terminated)

Measuring Instrument Oscilloscope and TV monitor

Specified Value

A=B, C=D, E=F

A=B

C=D

A

B

C

D

Color bar chart picture frame

TV monitor picture frame

E=F

V

E

F

 Displayed data of page 1 of adjusting remote commander.

1:XX:XX



  XL or YL data

  

XH or YH data

Setting method:
1)

Select page: 5, address: F1, and set data: FF.

2)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

3)

Adjust the zoom and the camera direction, and set to the pic-
ture frame to the specified position.

4)

Mark the position of the picture frame on the TV monitor,
and adjust the picture frame to this position in following ad-
justments using “Color reproduction adjustment frame”.

5)

Select page: 0, address: 03, and set data: 18.

6)

Select page: 1, and note down the XH and XL data. (Note 1)

7)

Select page: 0, address: 03, and set data: 22.

8)

Select page: 1, and note down the YH and YL data. (Note 1)

9)

Release the data setting performed at step 2).
(Refer to page 5-13)

10) Select page: 5, address: F1, and set data: 00.

How to reset the zoom and focus when they deviated:
If the zoom and focus deviated due to some reason, reset them in
the following method.

1)

Select page: 6, address: 90, and set data: XL. (Note 2)

2)

Select page: 6, address: 91, and set data: XH. (Note 2)

3)

Select page: 6, address: 92, and set data: YL. (Note 3)

4)

Select page: 6, address: 93, and set data: YH. (Note 3)

5)

Select page: 6, address: 01, set data: 79, press the PAUSE
button, and wait for 1 second.

6)

Select page: 6, address: 2C, and set data: 01.

7)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button.

 The data noted down at step 6) of “Setting method”.

 The data noted down at step 8) of “Setting method”.

Adjust the standard LV value.

Mode

STILL

Subject

Clear chart

(Color reproduction adjustment frame)

Measurement Point

Displayed data of page: 1 (Note 2)

Measuring Instrument Adjusting remote commander

Adjustment Page

F

Adjustment Address

26, 28

Specified Value

AE level: 0FE0 to 1020

Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.

The right four digits of the page: 1 displayed data of the
adjusting remote commander.

1:XX:XX

 

Displayed data

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.

4)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

5)

Select page: 6, address: 01, set data: 0D, and press the PAUSE
button. (The light level adjustment is performed and the ad-
justment data is stored in page: F, address: 26 and 28)

6)

Select page: 6, address: 02, and check that the data is “01”.

7)

Select page: 0, address: 03, and set data: 06.

8)

Select page: 1, and check that the displayed data (Note 2)
satisfies the AE level specified value.

Processing after Completing Adjustments:
1)

Select page: 0, address: 03, and set data: 00.

2)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.

3)

Select page: 5, address: F1, and set data: 00.

4)

Select page: D, address: 63, set data: 00, and press the PAUSE
button.

5)

Release the data setting performed at step 4).
(Refer to page 5-13)

6)

Select page: 0, address: 01, and set data: 00.

To perform mixed color cancel adjustment based on data of each
color in color bar.

Mode

STILL

Subject

Color bar chart

(Color reproduction adjustment frame)

Adjustment Page

F

Adjustment Address A0 to A3

Perform “Light Level Adjustment” before this
adjustment.

Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.

4)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

5)

Select page: 6, address: 01, set data: D7, and press the PAUSE
button.

6)

Select page: 6, address: 01, set data: D5, and press the PAUSE
button. (The mixed color adjustment is performed and the
adjustment data is stored in page: F, address: A0 to A3)

7)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.

2)

Select page: 5, address: F1, and set data: 00.

3)

Select page: D, address: 63, set data: 00, and press the PAUSE
button.

4)

Release the data setting performed at step 4).
(Refer to page 5-13)

5)

Select page: 0, address: 01, and set data: 00.

Adjust the white balance standard data at 3200K.

Mode

STILL

Subject

Clear chart

(Color reproduction adjustment frame)

Adjustment Page

F

Adjustment Address

3A to 3D, 59

Perform “Light Level Adjustment” and “Mixed Color
Cancel Adjustment” before this adjustment.

Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.

Adjusting method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 5, address: F1, and set data: FF.

3)

Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.

4)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

5)

Select page: 6, address: 01, set data: 11, and press the PAUSE
button.

6)

Select page: 6, address: 01, set data: 0B, and press the PAUSE
button. (The auto white balance standard data input is per-
formed and the standard data is stored in page: F, address:
3A to 3D, 59)

7)

Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments:
1)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.

2)

Select page: 5, address: F1, and set data: 00.

3)

Select page: D, address: 63, set data: 00, and press the PAUSE
button.

4)

Release the data setting performed at step 4).
(Refer to page 5-13)

5)

Select page: 0, address: 01, and set data: 00.

6)

Perform “Auto White Balance Adjustment”.

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility
will be poor.

Mode

STILL

Subject

Clear chart

(Color reproduction adjustment frame)

Filter

Filter C14 for color temperature
correction

Measurement Point

Displayed data of page: 1 (Note 3)

Measuring Instrument Adjusting remote commander

Adjustment Page

F

Adjustment Address

3F, 40, 80

Specified Value

DSC-S30

R ratio: 2760 to 28A0
B ratio: 6220 to 6360

DSC-S50

R ratio: 27E0 to 2920
B ratio: 5EE0 to 6020

Perform “Auto White Balance Standard Data Input”
before this adjustment.

Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.

The right four digits of the page: 1 displayed data of the
adjusting remote commander.

1:XX:XX

 

Displayed data

Adjusting method:
1)

Place the C14 filter for color temperature correction on the
lens.

2)

Select page: 0, address: 01, and set data: 01.

3)

Select page: 5, address: F1, and set data: FF.

4)

Select page: D, address: 63, set data: 40, and press the PAUSE
button of the adjusting remote commander.

5)

Perform “ Data setting during camera system adjustment”.
(Refer to page 5-13)

6)

Select page: 6, address: 01, set data: A7, and press the PAUSE
button.

7)

Select page: F, address: 49 to 4C, and noting down the data
of each address.

8)

Write data in page: F, address: 49 to 4C as shown in the fol-
lowing table.

Address

49

4A

4B

4C

Data

DSC-S30

28

00

62

C0

DSC-S50

28

80

5F

80

After setting each data, be sure to press the PAUSE button
of the adjusting remote commander.

9)

Select page: 6, address: 01, set data: A5, and press the PAUSE
button. (The auto white balance adjustment is performed and
the adjustment data is stored in page: F, address: 3F, 40 and
80)

10) Select page: 6, address: 02, and check that the data is “01”.
11) Select page: 6, address: 01, set data: 3F, and press the PAUSE

button.

12) Select page: 0, address: 03, and set data: 04.
13) Select page: 1, and check that the displayed data (Note 3)

satisfies the R ratio specified value.

14) Select page: 0, address: 03, and set data: 05.
15) Select page: 1, and check that the displayed data (Note 3)

satisfies the B ratio specified value.

16) Select page: F, address: 49 to 4C, and input the data noted

down at step 7).

After setting each data, be sure to press the PAUSE button
of the adjusting remote commander.

Processing after Completing Adjustments:
1)

Select page: 0, address: 03, and set data: 00.

2)

Select page: 6, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.

3)

Select page: 5, address: F1, and set data: 00.

4)

Select page: D, address: 63, set data: 00, and press the PAUSE
button.

5)

Release the data setting performed at step 5).
(Refer to page 5-13)

6)

Select page: 0, address: 01, and set data: 00.