Sony DSC-RX100M4 (serv.man2) Service Manual ▷ View online
2-3.
Notes on Replacing the Lens
When replacing the lens, read the QR code of the repair lens.
To read the QR code, start the Adjust manual and press the QR code reader button.
The read data is used in the following processes.
To read the QR code, start the Adjust manual and press the QR code reader button.
The read data is used in the following processes.
• Selection of Spacer Plate when mounting the imager board
• Adjustment after replacing the lens
• Adjustment after replacing the lens
QR code
2-3-1.
Selection of Spacer Plate when Mounting the Imager Board
1.
Load the Spacer Plate on the QR code reader screen.
2.
The thickness of the Spacer Plate to be loaded is displayed.
3.
Select the Spacer Plate according to the instructions on the screen and mount the imager board.
2-3-2.
Adjustment after Replacing the Lens
Perform LOAD from “Lens data carry” on the ADJUST tab in the Adjust manual.
DSC-RX100M4
2-5
2-4.
Notes on Removing/Installing the Imager Board (CD-1006A Flexible
Board)
Board)
When the CD-1006A Flexible Board (Imager) is mounted to the lens, shift and tilt adjustment is made with Spacer
Plates.
When removing the CD-1006A Flexible Board, pay attention to the following.
1.
Plates.
When removing the CD-1006A Flexible Board, pay attention to the following.
1.
When the lens is not replaced
Example: In the case of disassembly, cleaning, or replacement of the CD-1006A Flexible Board. (Imager)
Example: In the case of disassembly, cleaning, or replacement of the CD-1006A Flexible Board. (Imager)
• Check and record the size of the built-in three Spacer Plates and store them so as not to lose them.
• When assembling the CD-1006A Flexible Board, be sure to install the Spacer Plates to their original locations.
• When assembling the CD-1006A Flexible Board, be sure to install the Spacer Plates to their original locations.
Size
0.xx
Note
Be careful not to lose the Spacer Plates.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is
no local defocus. Selecting appropriate Spacer Plates is needed.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is
no local defocus. Selecting appropriate Spacer Plates is needed.
2.
When the lens is replaced
Refer to
Refer to
“2-3. Notes on Replacing the Lens”
for select Spacer Plates and install them to the new lens.
DSC-RX100M4
2-6
2-5.
Checking the Wi-Fi Function
After this unit has been disassembled and reassembled, check the Wi-Fi function.
Required equipment:
Windows PC or smartphone with Wi-Fi interface
Procedure:
1.
Turn on the power of the unit and enable the Wi-Fi function.
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
2.
Confirm on the PC or the smartphone that the unit is detected as a connectable wireless network.
DSC-RX100M4
2-7
2-6.
Precaution on Replacing the MS-1028 Board
2-6-1.
Angular Velocity Sensor
Before replacing the board with a repairing board, be sure to record the sensitivity indicated on the angular velocity
sensor on the repairing board.
The recorded sensitivity indication must be stored in the repairing board.
sensor on the repairing board.
The recorded sensitivity indication must be stored in the repairing board.
Method of the angular velocity sensor sensitivity writing:
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj” on the
ADJUST tab.
ADJUST tab.
Note
The sensitivity of the angular velocity sensor is indicated only on the repairing board, but is not indicated on mass
production boards.
production boards.
DSC-RX100M4
2-8
Click on the first or last page to see other DSC-RX100M4 (serv.man2) service manuals if exist.