Sony DSC-P2 (serv.man2) Service Manual ▷ View online
DSC-P2
5-41
5.
Switch Check (1)
Page 2
Address 80
Bit
Function
When bit value=1 When bit value=0
0
POWER SW
OFF
ON
(CONTROL
SWITCH BLOCK)
SWITCH BLOCK)
1
2
3
Shutter button
OFF
ON
(XSHTR ON)
(CONTROL SWITCH
BLOCK)
(CONTROL SWITCH
BLOCK)
4
Shutter button
OFF
ON
(XAE LOCK ON)
(CONTROL SWITCH
BLOCK)
(CONTROL SWITCH
BLOCK)
5
MEMORY STICK
OUT
IN
IN SW (MS Socket)
Using method:
1) Select page: 2, address: 80.
2) By discriminating the bit value of dispaly data, the state of the
1) Select page: 2, address: 80.
2) By discriminating the bit value of dispaly data, the state of the
switches can be discriminated.
2-3.
SERVICE MODE
1.
Setting the Test Mode
Page D
Address 21
Data
Function
00
Normal
02
Forced MOVIE mode power ON
03
Forced CAMERA mode power ON
08
Forced PLAY mode power ON
• Before setting the data, select page: 0, address: 01, and set data:
01.
• For page D, the data set is recorded in the non-volatile memory
by pressing the PAUSE button of the adjusting remote com-
mander. In this case, take note that the test mode will not be
exited even when the main power is turned off.
mander. In this case, take note that the test mode will not be
exited even when the main power is turned off.
• After completing adjustments/repairs, be sure to return the data
of this address to “00”, and press the PAUSE button of the ad-
justing remote commander.
Select page: 0, address: 01, and set data: 00.
justing remote commander.
Select page: 0, address: 01, and set data: 00.
2.
Bit Value Discrimination
Bit values must be discriminated using the display data of the ad-
justing remote commander for following items. Use the table be-
low to discriminate if the bit value is “1” or “0”.
justing remote commander for following items. Use the table be-
low to discriminate if the bit value is “1” or “0”.
Display on the
Bit values
Adjusting
bit3
bit2
bit1
bit0
remote
or
or
or
or
commander
bit7
bit6
bit5
bit4
0
0
0
0
0
1
0
0
0
1
2
0
0
1
0
3
0
0
1
1
4
0
1
0
0
5
0
1
0
1
6
0
1
1
0
7
0
1
1
1
8
1
0
0
0
9
1
0
0
1
A (A)
1
0
1
0
B (b)
1
0
1
1
C (c)
1
1
0
0
D (d)
1
1
0
1
E (E)
1
1
1
0
F (F)
1
1
1
1
Example:
If “8E” is displayed on the adjusting remote com-
mander, the bit values for bit7 to bit4 are shown in the
A
A
column, and the bit values for bit3 to bit0 are shown
in the B column.
0 : 00 : 00
Page
bit7 to bit4 discrimination
bit3 to bit0 discrimination
Address
Display on the adjustilng remote commander
B
A
3.
Mode Dial Check (1)
Page 2
Address 90
Data
Function
00 to 14
MOVIE
15 to 3D
SCN
3E to 67
CAMERA
Using method:
1) Select page: 2, address: 90.
2) By discriminating the bit value of dispaly data, the state of the
1) Select page: 2, address: 90.
2) By discriminating the bit value of dispaly data, the state of the
switches can be discriminated.
4. Mode Dial Check (2)
Page 2
Address 80, 81
Address
Bit
Function
When bit
When bit
value=1
value=0
80
1
PLAY
others
PLAY
81
4
SET UP
others
SET UP
Using method:
1) Select page: 2, address: 80 and 81.
2) By discriminating the bit value of dispaly data, the state of the
1) Select page: 2, address: 80 and 81.
2) By discriminating the bit value of dispaly data, the state of the
switches can be discriminated.
DSC-P2
5-42
6. Switch Check (2)
Page 2
Addresses 91, 92, 94
Using method:
1) Select page: 2, addresses: 91, 92 and 94.
2) By discriminating the dispaly data, the pressed key can be
1) Select page: 2, addresses: 91, 92 and 94.
2) By discriminating the dispaly data, the pressed key can be
discriminated.
Address
Data
00 to 0C
0D to 27
28 to 48
49 to 73
74 to A5
A6 to DC
DD to FF
91
CONTROL DOWN
CONTROL UP
MENU
(KEY AD0)
(SELFTIMER)
(STROBO)
(SW-368 board)
(IC404 tg)
(SW-368 board) (SW-368 board)
(S003)
(S004)
(S004)
92
CONTROL RIGHT CONTROL LEFT
CONTROL SET
DISPLAY/LCD
(KEY AD1)
(MACRO)
(REVIEW)
(SW-368 board)
ON/OFF
(IC404 th)
(SW-368 board) (SW-368 board)
(S004)
(SW-368 board)
(S004)
(S004)
(S005)
94
ZOOM (W)
ZOOM (T)
(KEY AD3)
(SW-368 board) (SW-368 board)
(IC404 tk)
(S001)
(S002)
7. LED Check
Using method:
1)
1)
Select page: 2, address: 04, set data: 02, and press the PAUSE
button of the adjusting remote commander.
button of the adjusting remote commander.
2)
Check that all LED except for the ACCESS LED are lit and all
segments of LCD (display window) are lit.
segments of LCD (display window) are lit.
3)
Select page: 2, address: 04, set data: 00 and press the PAUSE
button of the adjusting remote commander.
button of the adjusting remote commander.
Page 2
Address 04
Data 02
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
8. Self Diagnosis Code
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
5-42 E
6-1
DSC-P2
SECTION 6
REPAIR PARTS LIST
6-1-1. CABINET (FRONT) SECTION
NOTE:
• -XX and -X mean standardized parts, so they may
• -XX and -X mean standardized parts, so they may
have some difference from the original one.
• Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
should be anticipated when ordering these items.
• The mechanical parts with no reference number in
the exploded views are not supplied.
• Accessories are given in the last of the electrical
parts list.
• Glossless black, cosmic blue and glossy black
models are only for Japanese.
• Abbreviation
J
: Japanese model
6-1. EXPLODED VIEWS
2
1
2
2
2
3
ns
COVER
COVER
ns: not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
1
X-3952-495-1 CABINET (FRONT) ASSY (SILVER)
1
X-3952-498-1 CABINET (FRONT) ASSY (WHITE)
1
X-3952-502-1 CABINET (FRONT) ASSY (BLUE)
1
X-3952-505-1 CABINET (FRONT) ASSY (PINK)
1
X-3952-666-1 CABINET (FRONT) ASSY (GLOSSY BLACK) (J)
1
X-3952-672-1 CABINET (FRONT) ASSY (COSMIC BLUE) (J)
1
X-3952-675-1 CABINET (FRONT) ASSY (GLOSSLESS BLACK)
(J)
2
3-989-735-41 SCREW (M1.7), LOCK ACE, P2 (GLOSSY BLACK,
COSMIC BLUE, GLOSSLESS BLACK) (J)
2
3-989-735-51 SCREW (M1.7), LOCK ACE, P2 (SILVER, BLUE,
WHITE, PINK)
3
3-064-225-01 LID, CPC (SILVER, BLUE, WHITE, PINK)
3
3-064-225-11 LID, CPC (COSMIC BLUE, GLOSSY BLACK,
GLOSSLESS BLACK) (J)
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
The components identified by
mark 0 or dotted line with mark
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Replace only with part number
specified.
Ver 1.2 2006.05
6-2
DSC-P2
6-1-2. CABINET (REAR) ASSEMBLY
ns: not supplied
56
56
59
60
57
58
51
56
61
52
53
54
62
63
63
ns
ns
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
1-477-235-11 SWITCH BLOCK, CONTROL (WHITE, BLUE, PINK)
51
1-477-235-21 SWITCH BLOCK, CONTROL (SILVER)
51
1-477-235-41 SWITCH BLOCK, CONTROL (GLOSSY BLACK)
(J)
51
1-477-235-51 SWITCH BLOCK, CONTROL (COSMIC BLUE) (J)
51
1-477-235-61 SWITCH BLOCK, CONTROL
(GLOSSLESS BLACK) (J)
52
3-075-824-03 COVER, MODE DIAL (WHITE, BLUE, PINK)
52
3-075-824-12 COVER, MODE DIAL (SILVER)
52
3-075-824-31 COVER, MODE DIAL (GLOSSLESS BLACK/
GLOSSY BLACK) (J)
52
3-075-824-41 COVER, MODE DIAL (COSMIC BLUE) (J)
53
X-3952-496-7 CABINET (REAR) ASSY (SILVER)
53
X-3952-499-6 CABINET (REAR) ASSY (WHITE)
53
X-3952-503-6 CABINET (REAR) ASSY (BLUE)
53
X-3952-506-6 CABINET (REAR) ASSY (PINK)
53
X-3952-667-6 CABINET (REAR) ASSY (GLOSSY BLACK) (J)
53
X-3952-673-5 CABINET (REAR) ASSY (COSMIC BLUE) (J)
53
X-3952-676-5 CABINET (REAR) ASSY (GLOSSLESS BLACK)
(J)
54
3-075-831-11 COVER, JACK (SILVER)
54
3-075-831-21 COVER, JACK (WHITE)
54
3-075-831-31 COVER, JACK (BLUE)
54
3-075-831-41 COVER, JACK (PINK)
54
3-075-831-51 COVER, JACK (GLOSSY BLACK) (J)
54
3-075-831-61 COVER, JACK (COSMIC BLUE) (J)
54
3-075-831-71 COVER, JACK (GLOSSLESS BLACK) (J)
56
3-989-735-41 SCREW (M1.7), LOCK ACE, P2 (GLOSSY BLACK,
COSMIC BLUE, GLOSSLESS BLACK) (J)
56
3-989-735-51 SCREW (M1.7), LOCK ACE, P2 (SILVER, BLUE,
WHITE, PINK)
57
3-075-821-01 LCD WINDOW (1.5)
58
3-075-822-01 SHEET (1.5), ADHESIVE
59
X-3952-492-1 CABINET (LOWER) ASSY
(WHITE, SILVER, BLUE)
59
X-3952-508-1 CABINET (LOWER) ASSY (PINK)
59
X-3952-668-1 CABINET (LOWER) ASSY (GLOSSLESS BLACK/
GLOSSY BLACK) (J)
59
X-3952-678-1 CABINET (LOWER) ASSY (COSMIC BLUE) (J)
60
3-070-999-01 FOOT (UN), RUBBER
61
CAUTION
TAPE (K)
62
3-075-836-12 WINDOW, JACK (WHITE, SILVER, BLUE, PINK)
(J)
62
3-075-836-21 WINDOW, JACK (GLOSSY BLACK) (J)
62
3-075-836-31 WINDOW, JACK (COSMIC BLUE) (J)
62
3-075-836-41 WINDOW, JACK (GLOSSLESS BLACK) (J)
63
3-071-015-01 SHEET (LED), ADHESIVE
CAUTION :
For the part of 61 : TAPE (K) (3-831-441-11),
cut WOVEN (T0.25), FABRIC NON (3-076-631-01)
into the desired length and use it.
For the part of 61 : TAPE (K) (3-831-441-11),
cut WOVEN (T0.25), FABRIC NON (3-076-631-01)
into the desired length and use it.
Ver 1.2 2006.05
Click on the first or last page to see other DSC-P2 (serv.man2) service manuals if exist.