Sony DSC-HX60 / DSC-HX60V Service Manual ▷ View online
DSC-HX60/HX60V
4-15
23. Turn the Core Unit_4 in the direction of arrow to detach it.
Note: Though the Core Unit_4 has resistance due to the spring tension, it can be detached by turning it overcoming the resistance.
Cam Barrel
Core Unit_4
24. Unhook the 2G Spring at two locations and remove the 2 Group Frame Block Assy from the Linear Guide Barrel_B.
Tweezers
2 Group Frame Block Assy
2 Group Frame Block Assy
Linear Guide Barrel_B
2G Spring
2G Spring
DSC-HX60/HX60V
4-16
Installation
1. While matching the cabinet numbers of the Linear Guide Barrel_B and the 2 Group Frame Block Assy, insert the three projections of
1. While matching the cabinet numbers of the Linear Guide Barrel_B and the 2 Group Frame Block Assy, insert the three projections of
the
2 Group Frame Block Assy into the three vertical grooves of the Linear Guide Barrel_B.
2. Pull out the two hooks of the 2G Spring with tweezers and hook them to the 2 Group Frame Block Assy.
2 Group Frame Block Assy
2 Group Frame Block Assy
Linear Guide Barrel_B
Vertical groove
Vertical
grooves
grooves
Tweezers
Cabinet number
Cabinet number
Projections
2G Spring
2G Spring
3. While matching the cabinet numbers of the Cam Barrel and the Linear Guide Barrel_B, insert the Linear Guide Barrel_B into the Cam
Barrel turning the Linear Guide Barrel_B in the direction of arrow.
Cabinet number
Linear Guide Barrel_B
Cam Barrel
Core Unit_3
DSC-HX60/HX60V
4-17
4. While matching the triangle mark on the 1 Group Frame Block Assy with the three square marks on the Barrier Frame, insert the 1 Group
Frame Block Assy into the Barrier Frame.
5. Turn the 1 Group Frame Block Assy to match the rightmost convex on the Barrier Frame with the convex on the 1 Group Frame Block Assy.
6. While matching the convex position set in step 5 with the concave of the Linear Guide Barrel_A, insert the 1 Group Frame Block Assy into
6. While matching the convex position set in step 5 with the concave of the Linear Guide Barrel_A, insert the 1 Group Frame Block Assy into
the Linear Guide Barrel_A.
Barrier Frame
Arrow mark
Barrier Frame
1 Group Frame
Block Assy
Block Assy
Triangle mark
Concave
Convex
Convex
position
set
position
set
1 Group Frame
Block Assy
Block Assy
Three square marks
Three square marks
1 Group Frame
Block Assy
Block Assy
1 Group Frame
Block Assy
Block Assy
Linear Guide Barrel_A
Cabinet number
7. Slightly turn the rear edge of Barrier Frame in the direction of arrow to extend the Barrier Frame.
Linear Guide Barrel_A
Rear edge of Barrier Frame
Linear Guide
Barrel_A
Barrel_A
Barrier Frame
8. While matching the concave of the Front Assy with the triangle mark on the Core Unit_3, insert the Core Unit_3 into the Front Assy.
Triangle mark
Concave
Core Unit_3
Front Assy
DSC-HX60/HX60V
4-18
9. Install the Barrier Assy.
Note: For assembling the Barrier Assy, refer to “(1) Ornamental Ring A or Barrier Assy Replacing Method”.
10. Turn the rear edge of Core Unit_3 counterclockwise to set the Core Unit_2 in the retracted state.
Barrier Assy
Barrier Ring
Rear edge of
Core Unit_3
Core Unit_3
Core Unit_2
Barrier Assy
Note
For assembling the Ornamental Ring A
and the Barrier Assy, refer to "(1)
Ornamental Ring A or Barrier Assy
Replacing Method".
For assembling the Ornamental Ring A
and the Barrier Assy, refer to "(1)
Ornamental Ring A or Barrier Assy
Replacing Method".
11. While matching the concave of the Drive Gear Barrel Assy with the diamond mark on the Linear Motion Cam Barrel, insert the Linear
Motion Cam Barrel into the Drive Gear Barrel Assy.
12. Turn the Linear Motion Cam Barrel until the gear end of the Drive Gear Barrel Assy and the semicircular cutout of the Linear Motion Cam
Barrel come to the position shown below.
Linear Motion Cam Barrel
Diamond mark
Match the gear end of the Drive Gear Barrel Assy with
the semicircular cutout of the Linear Motion Cam Barrel.
the semicircular cutout of the Linear Motion Cam Barrel.
Concave
Drive Gear Barrel Assy
Click on the first or last page to see other DSC-HX60 / DSC-HX60V service manuals if exist.