Sony XAV-601BT Service Manual ▷ View online
XAV-601BT
21
3-7. CONNECTION CORD FOR AUTOMOBILE (
) (CNC201)
1 connector
(CN201)
4 connection cord
for automobile ( )
(CNC201)
2 filament tape
:LUHVHWWLQJ
–7RSYLHZ–
–7RSYLHZ–
Insert is shallow
Insert is straight
to the interior.
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG
Note: When you install the connector, please install themcorrectly.
There is a possibility that this machine damages when not
correctly installing it.
3 screw
(PTT
2.6
u 6)
connection cord for
automobile ( ) (CNC201)
automobile ( ) (CNC201)
tape
MAIN board
guide line
3-6. XM BOARD (US, Canadian models), EXT-NAVI BOARD (Russian, E (PAL), Saudi Arabia models)
4 screw
(PTT2.6
u 6)
5 bracket (connector)
6 XM board (US, Canadian)
EXT-NAVI board (Russian, E (PAL), Saudi Arabia)
1 NAVI-CABLE connector
(CN603)
1 XM-CABLE connector
(CN652)
2 Remove the solder.
3 Bend the claw in the
direction of an arrow.
3 Bend the claw in the
direction of an arrow.
(Russian, E (PAL), Saudi Arabia)
(US, Canadian)
XAV-601BT
22
3-8. MAIN BOARD BLOCK
2 two screws
(PTT2.6
u 8)
4 boss
5
4 boss
3 ground point screw
(PTT2.6
u 6)
3 ground point screw
(PTT2.6
u 6)
2 two screws
(PTT2.6
u 8)
6 MAIN board block
Insert is shallow
Insert is straight
to the interior.
to the interior.
connector
Insert is incline
flexible
cable
cable
connector
flexible
cable
cable
connector
flexible
cable
cable
NG
OK
NG
1 flexible flat cable (60 core)
(CN901)
3 ground point screw
(PTT2.6
u 6)
3 ground point screw
(PTT2.6
u 6)
Note: When you install the flexible flat cable (60 core), please install
it correctly. There is a possibility that this machine damages
when not correctly installing it.
3-9. SUB PANEL ASSY
3 screw
(PTT2.6
u 6)
3 screw (PTT2.6 u 6)
9 sub panel assy
5 claw
5 claw
5 claw
4 boss
4 boss
Insert is shallow
Insert is straight
to the interior.
to the interior.
connector
Insert is incline
flexible
cable
cable
connector
flexible
cable
cable
connector
flexible
cable
cable
NG
OK
NG
Note: When you install the flexible flat cable (60 core), please install
it correctly. There is a possibility that this machine damages
when not correctly installing it.
1 flexible flat cable (60 core)
(CN901)
8 lock assy (2DIN)
2 two screws
(PTT2.6
u 8)
2 screw (PTT2.6 u 8)
7 screw (T) (2 u 5, Black)
6
7 screw (T) (2 u 5, Black)
7 screw (T) (2 u 5, Black)
XAV-601BT
23
3-10. DC FAN (25X25) (M801), MAIN BOARD
1 fuse (blade type) (auto fuse)
(F801)
7 MAIN board
D401
thermal conductive
pad T10
pad T10
MAIN board
CN803
5 DC fan
(25
u 25)
(M801)
:LUHVHWWLQJ
7KHUPDOFRQGXFWLYHSDG7VHWWLQJ
NG
OK
3 screw
(PTT2.6
u 14)
3 screw
(PTT2.6
u 14)
DC fan (25
u 25) (M801)
sheet (GPS wire) or
filament tape
filament tape
D401
D401
D401
thermal conductive
pad T10
pad T10
thermal conductive
pad T10
pad T10
thermal conductive
pad T10
pad T10
guide line
thermal conductive
pad T10
pad T10
thermal conductive
pad T10
pad T10
thermal conductive
pad T10
pad T10
D401
D401
D401
guide line
6 thermal conductive
pad
T10
2 connector
(CN803)
4 sheet (GPS wire)
or
filament
filament
tape
Note
2: Sheet (GPS wire) has been
changed into filament tape from
the midway of production.
3-11. DVD MECHANISM DECK BLOCK
3 shield (613S)
1 two screws
(P1.7
u 2.2)
5 bracket (DVD)
6 DVD mechanism deck block
4 screw
(PTT2.6
u 5) (for MG-613XD-187)
(PTT2.6
u 6) (for MG-614D-189)
2 screw
(PTT2.6
u 5) (for MG-613XD-187)
(PTT2.6
u 6) (for MG-614D-189)
(MG-613XD-187 only)
Ver. 1.3
Note: Refer to SUPPLEMENT-2 for discrimination of the DVD
mechanism deck (MG-613XD-187 or MG-614D-189).
Note 1: When the complete MAIN board is replaced, the destination
setting is necessary. Refer to “NOTE THE MAIN BOARD OR
SYSTEM CONTROLLER (IC502) REPLACING” on page 5.
SYSTEM CONTROLLER (IC502) REPLACING” on page 5.
XAV-601BT
24
3-12. SERVO BOARD
– DVD mechanism deck block (Bottom view) –
1 Remove the two solders
of loading motor wire.
8 SERVO board
SERVO board
RED
WHITE
5 three toothed lock screws
(Z
M1.7
u 2.5)
3 OP flexible board (CN2)
Note: When disconnecting the OP flexible board from
of the connector. Be sure to refer to “NOTE FOR
FLEXIBLE BOARD OF THE OPTICAL PICK-UP”
of the servicing notes (See page 6).
7 flexible flat cable (60 core) (FFC1)
(CN10)
6 Remove the SERVO board
in the direction of the arrow.
4 sled motor flexible board
(CN1)
2 Remove the three solders
of SENSOR board wire.
SERVO board
RED
WHITE
BLACK
3-13. CHASSIS (T612Z) SUB ASSY, SENSOR BOARD
1 two precision screws
(P1.7
u 2.2)
4 chassis (T612Z) sub assy
1 two precision screws
(P1.7
u 2.2)
2 claw
3 claw
6 SENSOR borad
5 Remove the three solders
of SENSOR board wire.
RED
WHITE
BLACK
Click on the first or last page to see other XAV-601BT service manuals if exist.