Sony MEX-XB100BT Service Manual ▷ View online
MEX-XB100BT
5
1-2. Display in Destination Setting Mode
(Displayed characters/values in the following fi gure are example)
(Displayed characters/values in the following fi gure are example)
Destination code
12 digits
OP0
OP1
OP2
OP3
OP4
OP5
1-3. Entering the Destination Code
•
•
Method of operation by main unit
1. Rotate the control dial, and select the alphanumeric character
of “0 to F”.
2. The digit advances by pressing the [PUSH ENTER/VOICE] or
[
> M
SEEK+] button.
The digit returns by pressing the [
MODE] or [SEEK–
m
.
] button.
3. The setting is completed by pressing the [PUSH ENTER/
VOICE] button, then the display turns off, the initialization
operation is done, and the display returns to the clock display.
operation is done, and the display returns to the clock display.
•
Method of operation by remote commander
(Except AEP and UK models only)
Note: The model to which the remote commander is not attached can
also be operated by using the remote commander.
1. Press
the
[V] or [v] button, and select the alphanumeric char-
acter of “0 to F”.
2. The digit advances by pressing the [b] button.
The digit returns by pressing the [B] button.
3. The setting is completed by pressing the [ENTER] button, then
the display turns off, the initialization operation is done, and
the display returns to the clock display.
the display returns to the clock display.
1-4. Destination Code
Destination
OP5
OP4
OP3
OP2
OP1
OP0
US, Canadian
5
2
8
2
A
2
AEP, UK
1
2
8
0
A
1
Russian
1
3
8
0
A
7
E, Australian
1
6
B
0
A
0
Saudi Arabia
1
6
A
0
A
4
2. Confi rmation After Destination Setting
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Destination setting checking method:
1. In the state of source off (the clock is displayed on the liquid
1. In the state of source off (the clock is displayed on the liquid
crystal display), enter the test mode by pressing the buttons in
order of the [
order of the [
4]
t [MIC 5] t [PAUSE 6] (press only the
[PAUSE 6] button for two seconds).
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Clock diaplay
2. In the state in which the software main version is displayed
on the liquid crystal display (refer to following fi gure), enter
the destination setting value display mode by pressing the [
the destination setting value display mode by pressing the [
SCRL DSPL] button twice.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Software main version
3. Confi rm the alphanumeric character of 12 digits in liquid crys-
tal display is a value correctly input.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Destination code
12 digits
OP0
OP1
OP2
OP3
OP4
OP5
4. The resetting operation is executed by pressing the [
OFF
SRC] button for 1 second after the confi rming ends, and the
unit returns to the normal condition.
unit returns to the normal condition.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Diaplay after reset
MEX-XB100BT
6
MODEL IDENTIFICATION
Distinguish by Part No. on the bottom side of a main unit.
Distinguish by Part No. on the bottom side of a main unit.
– Bottom view –
(Except E, Australian and Saudi Arabia models)
(Except E, Australian and Saudi Arabia models)
– Bottom view –
(Saudi Arabia model)
(Saudi Arabia model)
– Bottom view –
(E and Australian models)
(E and Australian models)
Part No.
Model Number Label
Part No.
Model Number Label
Part No.
Model Number Label
Part No.
Destination
4-558-654-0[]
US and Canadian models (UC)
4-558-655-0[]
AEP and UK models (EUR)
4-558-656-0[]
Russian model (RU2)
4-558-657-0[]
E and Australian models (E)
4-558-660-0[]
Saudi Arabia model (EA)
TEST DISCS
Use following TEST DISC (for CD) when this unit confi rms the
operation and checks it.
Use following TEST DISC (for CD) when this unit confi rms the
operation and checks it.
Part No.
Description
3-702-101-01 DISC
(YEDS-18),
TEST
4-225-203-01 DISC
(PATD-012),
TEST
NOTE OF PERFORMING THE OPERATION CHECK
When performing the operation check in the state that is removed
the CD mechanism deck from the main unit, it is necessary to use
a long fl exible fl at cable.
When performing the operation check, use following fl exible fl at
cable.
When performing the operation check in the state that is removed
the CD mechanism deck from the main unit, it is necessary to use
a long fl exible fl at cable.
When performing the operation check, use following fl exible fl at
cable.
Part No.
Description
1-846-819-31
CABLE FLEXIBLE FLAT (27 CORE)
(Length: 150 mm)
NOTE OF REPLACING THE KEY BOARD
When the KEY board is defective, replace the FRONT PANEL
(SV) ASSY (Ref. No. FP1).
When the KEY board is defective, replace the FRONT PANEL
(SV) ASSY (Ref. No. FP1).
NOTE OF REPLACING THE IC804, IC1002, IC1009,
IC1501 AND Q1507 to Q1510 ON THE MAIN BOARD
IC804, IC1002, IC1009, IC1501 and Q1507 to Q1510 on the
MAIN board cannot replace with single. When these parts are
damaged, replace the complete mounted board.
IC1501 AND Q1507 to Q1510 ON THE MAIN BOARD
IC804, IC1002, IC1009, IC1501 and Q1507 to Q1510 on the
MAIN board cannot replace with single. When these parts are
damaged, replace the complete mounted board.
NOTE OF REPLACING THE IC1600 ON THE AMP BOARD
AND THE COMPLETE AMP BOARD
When the IC1600 on the AMP board and the complete AMP board
are replaced, it is necessary to spread the compound between the
AMP board and the heat sink.
Spread the compound (OIL COMPOUND (KS609)) referring to
the fi gure below.
AND THE COMPLETE AMP BOARD
When the IC1600 on the AMP board and the complete AMP board
are replaced, it is necessary to spread the compound between the
AMP board and the heat sink.
Spread the compound (OIL COMPOUND (KS609)) referring to
the fi gure below.
– AMP Board (Component Side) –
oil compound (KS609)
IC1600
MEX-XB100BT
7
IMPORTANT NOTE OF “INITIALIZING”
The purpose of “Bluetooth Initialize” is to initialize the Bluetooth
connection history (HF/Audio Streaming). (To delete the device
information for the devices that you connected to when searching,
etc.)
When complete MAIN board is replaced, it is necessary to initial-
ize this unit.
Refer to the following, initialize this unit.
The purpose of “Bluetooth Initialize” is to initialize the Bluetooth
connection history (HF/Audio Streaming). (To delete the device
information for the devices that you connected to when searching,
etc.)
When complete MAIN board is replaced, it is necessary to initial-
ize this unit.
Refer to the following, initialize this unit.
Note: Phonebook data and dialed/received call history can be deleted by
executing “Bluetooth Initialize”.
Procedure:
1. In the state of source off (the clock is displayed), press the
1. In the state of source off (the clock is displayed), press the
[MENU] button.
2. Rotate the control dial, and select the “SET BT”.
3. Press the [PUSH ENTER/VOICE] button.
4. Rotate the control dial, and select the “SET BT INIT”.
5. Press the [PUSH ENTER/VOICE] button, and the message
3. Press the [PUSH ENTER/VOICE] button.
4. Rotate the control dial, and select the “SET BT INIT”.
5. Press the [PUSH ENTER/VOICE] button, and the message
“SET INIT-NO” is displayed on the liquid crystal display.
6. Rotate the control dial clockwise, and the message “SET INIT-
YES” is displayed on the liquid crystal display.
7. Press the [PUSH ENTER/VOICE] button, and the message
“INITIAL” is blinked on the liquid crystal display.
8. When “Bluetooth Initialize” is completed, the message
“COMPLETE” is displayed on the liquid crystal display for a
moment.
moment.
9. Press
the
[
MODE] button, and return to the state of source
off (the clock is displayed) mode.
CLEANING THE CONNECTORS
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 7) and clean the connectors with
a cotton swab. Do not apply too much force.
Otherwise, the connectors may be damaged.
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 7) and clean the connectors with
a cotton swab. Do not apply too much force.
Otherwise, the connectors may be damaged.
Notes
ˎ For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
switch.
ˎ Never touch the connectors directly with your fingers
or with any metal device.
CANCELING THE DEMO MODE
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
appears when the source is off and the clock is
displayed.
1
Press MENU, rotate the control dial to
select [SET DISPLAY], then press it.
select [SET DISPLAY], then press it.
2
Rotate the control dial to select [SET
DEMO], then press it.
DEMO], then press it.
3
Rotate the control dial to select [SET
DEMO-OFF], then press it.
DEMO-OFF], then press it.
The setting is complete.
4
Press
(back) twice.
The display returns to normal reception/play
mode.
mode.
OPERATION CHECK OF THE NFC AFTER COMPLET-
ING THE REPAIRS
After completing the repairs of this unit, follow the procedure below
to check normal operation of the NFC.
ING THE REPAIRS
After completing the repairs of this unit, follow the procedure below
to check normal operation of the NFC.
Note: After checking of NFC operation, be sure to delete the pairing infor-
mation before returning this unit to the customer.
By touching the control dial on the unit with an
NFC* compatible smartphone, the unit is paired and
connected with the smartphone automatically.
NFC* compatible smartphone, the unit is paired and
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones and
IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated location
on NFC compatible devices.
between various devices, such as mobile phones and
IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated location
on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading the app “NFC Easy Connect”
available at Google Play™ is required. The app may
not be downloadable in some countries/regions.
installed, downloading the app “NFC Easy Connect”
available at Google Play™ is required. The app may
not be downloadable in some countries/regions.
1
Activate the NFC function on the
smartphone.
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
supplied with the smartphone.
2
Touch the N-Mark part of the unit with
the N-Mark part of the smartphone.
the N-Mark part of the smartphone.
Make sure that
lights up on the display of the
unit.
To disconnect by One touch
Touch the N-Mark part of the unit with the N-Mark
part of the smartphone again.
part of the smartphone again.
Notes
ˎ When making the connection, handle the
smartphone carefully to prevent scratches.
ˎ One touch connection is not possible when the unit is
already connected to another NFC compatible device.
In this case, disconnect the other device, and make
connection with the smartphone again.
In this case, disconnect the other device, and make
connection with the smartphone again.
Connecting with a Smartphone by One
touch (NFC)
touch (NFC)
and clean the connectors with
MEX-XB100BT
8
6. Bluetooth Phone (Hands Free) Function Check
Note: Depending on the connecting device, Signal-strength/Battery-re-
maining indications might not be displayed.
Or, depending on the connecting device, the levels of indications are
shown incorrectly.
Even if you see no indications or wrong indications, they are not fail-
ures of this unit.
1. Search for this unit from the Bluetooth device (cellular phone),
and confi rm whether this unit (model name) is displayed.
2. Search for the distance of this unit and the Bluetooth device
(cellular phone) about 5 m apart.
Confi rm whether the Bluetooth device (or this unit) is dis-
played after it searches.
3. Do the pairing of the cellular phone and this unit (input of
passkey).
4. Connect the cellular phone with this unit, and confi rm the
“HF” icon ( ) lights.
5. Confi rm the connection continues even if the distance of the
cellular phone and this unit is separated by about 5 m.
6. Set this unit besides the “BT PHONE” source, and call the cel-
lular phone connected with this unit.
Confi rm the automatic change of this unit into “BT PHONE”
source, and the change into the screen for incoming calls.
Confi rm the ring tone is heard from the front speaker.
7. Take a phone call (press the [
7. Take a phone call (press the [
CALL] button), and start a
conversation.
Confi rm the other person voice is heard from the speaker.
Speak toward an external microphone at the following condi-
tion, and confi rm the other party hears its voice (An external
microphone is connected).
tion, and confi rm the other party hears its voice (An external
microphone is connected).
Compare the sound quality with a normal set. Confi rm that
there is no big difference.
there is no big difference.
8. Turn on ACC from off, and confi rm whether this unit connects
Bluetooth with the cellular phone again.
Note: Depending on the cellular phone, it might not reconnect automati-
cally when ACC is turned on.
7. Bluetooth Audio Function Check
Note: Depending on the connecting BT Audio device, track information
(e.g. track name, playback time) can be on display.
If the device doesn’t support AVRCP1.3, or, if AVRCP1.3 feature of
the device has not been validated with this unit;
the device has not been validated with this unit;
the track information won't be shown.
Even if there is no track information on display during playback of
an AVRCP1.3 device, it is not a failure of this unit.
an AVRCP1.3 device, it is not a failure of this unit.
1. Connect the Bluetooth audio device (or cellular phone with
Bluetooth audio function) with this unit, and confi rm the “Au-
dio Streaming” icon ( ) lights.
dio Streaming” icon ( ) lights.
2. Playback Bluetooth audio. Confi rm the sound is emitted from
this unit when this unit is switched to “BT AUDIO” source.
3. Confi rm whether Bluetooth audio can be controlled by oper-
ating this unit (the [
> M
SEEK+], [SEEK–
m
.
] and
[PAUSE 6] buttons operation).
Note: Varies depending on the connected Bluetooth audio device.
8. What to Do after Checking
• After checking, select “SET BT INIT” from the menu list of
• After checking, select “SET BT INIT” from the menu list of
this unit to execute initialization.
(Connected device information is deleted)
BLUETOOTH FUNCTION CHECKING METHOD USING
A CELLULAR PHONE
1. Required
A CELLULAR PHONE
1. Required
Equipment
•
This unit to be tested, external microphone of attachment
•
Cellular phone (Recommended SEMC W880 or W910i, or se-
lect from connectable cellular phones list)
lect from connectable cellular phones list)
• Bluetooth audio devices (SONY NWZ-A826, or select from
connectable cellular phones/audio devices list)
•
Speaker connection (at least Front L/R ch)
•
DC power supply (12 V)
2. Preparation
• Confi rm the setting of this unit and note down it.
• Press the [
• Confi rm the setting of this unit and note down it.
• Press the [
CALL] button and rotate the control dial until
“SET PAIRING” appears, then press it, confi rm that the Blue-
tooth signal icon (
tooth signal icon (
) is fl ashing.
•
Turn on the Bluetooth function of the cellular phone.
3. Test
Environment
•
No other Bluetooth device is making a communication in the
periphery (within 20 m).
periphery (within 20 m).
•
No other this unit are supplied with electric power.
• There are no two or more wireless LAN access points in the
periphery (with 50 m) (one is OK).
•
The set should be tested in a place such as a meeting room, free
from ambient noise.
from ambient noise.
•
The speaker at the far end should be in a place such as another
meeting room separated acoustically.
meeting room separated acoustically.
4. Setting
Install this unit on the desktop.
Install this unit on the desktop.
Speaker
Approx. 50 cm
Unit
Tester
Approx. 80 cm
5. Precautions
Beware of the following points when conducting the
talking test:
•
Beware of the following points when conducting the
talking test:
•
There is no fault if a talking can be made by adjusting appro-
priately the volume of the telephone of the other party and the
cellular phone connected through the Bluetooth, besides the
setup of this unit.
priately the volume of the telephone of the other party and the
cellular phone connected through the Bluetooth, besides the
setup of this unit.
•
The speaker’s voice will become loud naturally if the periph-
ery is noisy, or become low if quiet (even though the speaker
intents to talk on the same volume level).
ery is noisy, or become low if quiet (even though the speaker
intents to talk on the same volume level).
• The speaker’s voice will become loud naturally if the other
party’s voice is loud.
Click on the first or last page to see other MEX-XB100BT service manuals if exist.