Sony MEX-XB100BT Service Manual ▷ View online
MEX-XB100BT
13
4. Check Method of the NFC Tag Data
Check the NFC tag data according to the procedure below.
Check the NFC tag data according to the procedure below.
Procedure:
1. Check the Bluetooth address (BD_ADDR).
1. Check the Bluetooth address (BD_ADDR).
There are following two checking methods.
•
How to read from the BT module label
•
How to display on the liquid crystal display by the test mode
How to read from the BT module label:
Set the unit to the state where the BT module (Ref. No. IC1002
on the MAIN board) can be seen.
on the MAIN board) can be seen.
(Refer to the “3. DISASSEMBLY” on the page 25 and after)
– Top view –
BT module label
BD_ADDR
(Barcode)
(Barcode)
BD_ADDR
48D2242F241A
MAIN board
How to display on the liquid crystal display by the
test mode:
test mode:
1. In the state of source off (the clock is displayed on the
liquid crystal display), enter the test mode by pressing the
buttons in order of the [
buttons in order of the [
4]
t [MIC 5] t [PAUSE 6]
(press only the [PAUSE 6] button for two seconds).
(Displayed characters/values in the following fi gure are
example)
example)
Software main version
2. In the state in which the software main version is displayed
on the liquid crystal display, enter the Bluetooth address
(BD_ADDR) display mode by pressing the [
(BD_ADDR) display mode by pressing the [
SCRL
DSPL] button.
(Displayed characters/values in the following fi gure are
example)
example)
Bluetooth address (BD_ADDR)
Note: When pressing the [ SCRL DSPL] button again, the destina-
tion code is displayed on the liquid crystal display, but it is not
necessary to display in this step.
necessary to display in this step.
3. The resetting operation is executed by pressing the [
OFF
SRC] button for 1 second after the confi rming ends, and
the unit returns to the normal condition.
the unit returns to the normal condition.
2. Turn on the NFC function of the smartphone.
3. Start the NFCtagWriter application on the smartphone.
4. Tap the “Read” on the screen of the smartphone.
3. Start the NFCtagWriter application on the smartphone.
4. Tap the “Read” on the screen of the smartphone.
5. Check that “BD_ADDR” on the screen of the smartphone ac-
cords with BD_ADDR written on the BT module label and
“MODE” on the screen of the smartphone is “00 00 (Read-
only)”.
“MODE” on the screen of the smartphone is “00 00 (Read-
only)”.
6. End the NFCtagWriter application on the smartphone.
MEX-XB100BT
14
AFFIXING OF LABEL (SERIAL NUMBER)
When the front panel (SV) assy is replaced, it is necessary to affi x
the label (serial number).
2 labels (serial number) are included with a new front panel (SV)
assy. Affi x 1 label to the rear side of the front panel (SV) assy. Af-
fi x the other one to the bottom side of main unit.
Be sure to perform this procedure, as Bluetooth will not operate
correctly if the serial number of the front panel (SV) assy and main
unit do not match.
Also, since the serial number has changed, print page 15 and hand
the tear-off with the product to the customer when returning the
product after repairs are complete.
When the front panel (SV) assy is replaced, it is necessary to affi x
the label (serial number).
2 labels (serial number) are included with a new front panel (SV)
assy. Affi x 1 label to the rear side of the front panel (SV) assy. Af-
fi x the other one to the bottom side of main unit.
Be sure to perform this procedure, as Bluetooth will not operate
correctly if the serial number of the front panel (SV) assy and main
unit do not match.
Also, since the serial number has changed, print page 15 and hand
the tear-off with the product to the customer when returning the
product after repairs are complete.
–
Front panel (SV) assy rear view
–
label (serial number)
– Main unit bottom view –
(Except E and Australian models)
(Except E and Australian models)
– Main unit bottom view –
(E and Australian models)
(E and Australian models)
label (serial number)
label (serial number)
6. Version Check Method of the NFC Tag Data Writing
Application for the Servicing
Check the version of the NFC tag data writing application
(NFCtagWriter application) for the servicing according to the
procedure below.
(NFCtagWriter application) for the servicing according to the
procedure below.
Procedure:
1. Start the NFCtagWriter application on the smartphone.
2. Tap the “
1. Start the NFCtagWriter application on the smartphone.
2. Tap the “
” (menu button) or “ ” of the screen of the smart-
phone, then tap the “About” that is displayed on the screen of
the smartphone.
the smartphone.
or
3. Check that version of the NFC tag data writing application for
the servicing is displayed on the screen of the smartphone.
ver.0.9.0
The use is not allowed
(Use the ver.1.0.2 and above)
ver.1.0.2
The use is allowed
5. The Factor that One Touch Connection is Impossible
The four following factors are considered as the factor that one touch connection is impossible.
Guess and check the defective factor by each checking result.
The four following factors are considered as the factor that one touch connection is impossible.
Guess and check the defective factor by each checking result.
Note: The four following factors are examples.
Factor
Bluetooth manual con-
nection check by user
NFC tag data check
Bluetooth manual connec-
tion check by servicing
NFC one touch connection
check with smartphone
1 BT module defect
NG
―
NG
NG
2
Knob (VOL) (SV)
assy defect
assy defect
OK
NG
OK
NG
3
NFC tag data
writing failure
writing failure
OK
NG
OK
NG
4 Smartphone
OK
OK
OK
NG
MEX-XB100BT
15
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the operating instruction.
• Please cut out along the dotted line and use it.
MEX-XB100BT
16
MEMO
Click on the first or last page to see other MEX-XB100BT service manuals if exist.