Sony CDX-848X Service Manual ▷ View online
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
45
CDX-848X
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
line with mark 0 are critical for safety.
Replace only with part number specified.
*
1-679-419-11 SWITCH BOARD
*************
< SWITCH >
SW801
1-692-431-21 SWITCH, TACTILE (Z)
***********************************************************
MISCELLANEOUS
**************
**************
3
1-664-796-11 JACK FLEXIBLE BOARD
251
1-676-341-11 OP FLEXIBLE BOARD
0 255
8-820-103-03 OPTICAL PICK-UP KSS-720A/K1RP
M101
A-3315-151-A SLED MOTOR ASSY (251)
M102
A-3301-998-A SPINDLE MOTOR (S) SUB ASSY
M103
A-3301-123-A ELJ MOTOR ASSY (CHUCKING)
M104
A-3301-123-A ELJ MOTOR ASSY (ELEVATOR)
RV202
1-227-137-11 RES, VAR, SLIDE 10K
(ELEVATOR HEIGHT SENSOR)
************************************************************
**************
HARDWARE LIST
**************
HARDWARE LIST
**************
#1
7-627-852-07 SCREW, PRECISION +P 1.7X2.5
#2
7-685-792-09 SCREW +PTT 2.6X6 (S)
#3
7-685-781-09 SCREW +PTT 2X4 (S)
#4
7-624-104-04 STOP RING 2.0, TYPE-E
#5
7-627-554-07 SCREW, PRECISION +P 2X2.2
#6
7-628-253-00 SCREW +PS 2X4
#7
7-627-553-27 SCREW, PRECISION +P 2X2.5
#8
7-624-102-04 STOP RING 1.5, TYPE-E
#9
7-627-850-28 SCREW, PRECISION +P 1.4X3
#10
7-627-000-00 SCREW, PRECISION +P1.7X2.2 TYPE 3
#11
7-627-553-37 PRECISION SCREW +P 2X3 TYPE 3
#13
7-685-853-04 SCREW +BVTT 2X6 (S)
************************************************************
ACCESSORIES & PACKING MATERIALS
*******************************
*******************************
3-225-368-11 MANUAL, INSRTUCTION (ENGLISH, FRENCH)
3-225-368-21 MANUAL, INSRTUCTION (ENGLISH, FRENCH,
3-225-368-21 MANUAL, INSRTUCTION (ENGLISH, FRENCH,
GERMAN, DUTCH, ITALIAN)
3-225-368-31 MANUAL, INSRTUCTION (SPANISH, SWEDISH,
PORTUGUESE, POLISH, RUSSIAN, GREEK)
A-3301-944-A MAGAZINE (250T) ASSY
************************************************************
PARTS FOR INSTALLATION AND CONNECTIONS
**************************************
**************************************
501
3-040-583-21 BRACKET (T)
* 502
X-3369-824-1 SCREW ASSY
503
1-790-455-21 CORD, CONNECTION (RCA PIN CORD 5.5m)
504
1-590-519-21 CORD (WITH CONNECTOR) (BUS CABLE 5.5m)
501
502
+PSW4
×
10
×
4
TAPPING SCREW
(DIA.5
×
20)
×
4
BRACKET
×
2
503
504
RCA PIN CORD 5.5 m
×
1
BUS CABLE 5.5 m
×
1
SWITCH
SCREW ASSY
CDX-848X
SERVICE MANUAL
CDX-848X
SUPPLEMENT-1
File this supplement with the service manual.
Subject: Change of RF/LSW boards
(ECN-CSA04819)
US Model
AEP Model
UK Model
Ver 1.2 2001.06
In this set, RF/LSW boards have been changed in the midway of pro-
duction.
Printed wiring boards and schematic diagrams of new type, and changed
parts list are described in this supplement-1.
Refer to original service manual for other information.
duction.
Printed wiring boards and schematic diagrams of new type, and changed
parts list are described in this supplement-1.
Refer to original service manual for other information.
• NEW/FORMER TYPE DISCRIMINATION
Former type : 1-679-422-11
New type
New type
: 1-679-422-12
– LSW BOARD (Component Side) –
Former type : 1-679-421-11
New type
New type
: 1-679-421-12
– RF BOARD (Component Side) –
NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
Note on Printed Wiring Board:
•
•
Y
: parts extracted from the conductor side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Conductor Side)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Component Side) the parts face are indicated.
Note on Schematic Diagram:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
A
: B+ Line.
• Power voltage is dc 14.4V and fed with regulated dc power
supply from CD changer controller.
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : CD PLAY
no mark : CD PLAY
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
J
: CD PLAY
Note: The components identified by mark
0
or dotted line
with mark
0
are critical for safety.
Replace only with part number specified.
CDX-848X
SERVICE MANUAL
CDX-848X
SUPPLEMENT-1
File this supplement with the service manual.
Subject: Change of RF/LSW boards
(ECN-CSA04819)
US Model
AEP Model
UK Model
Ver 1.2 2001.06
In this set, RF/LSW boards have been changed in the midway of pro-
duction.
Printed wiring boards and schematic diagrams of new type, and changed
parts list are described in this supplement-1.
Refer to original service manual for other information.
duction.
Printed wiring boards and schematic diagrams of new type, and changed
parts list are described in this supplement-1.
Refer to original service manual for other information.
• NEW/FORMER TYPE DISCRIMINATION
Former type : 1-679-422-11
New type
New type
: 1-679-422-12
– LSW BOARD (Component Side) –
Former type : 1-679-421-11
New type
New type
: 1-679-421-12
– RF BOARD (Component Side) –
NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
Note on Printed Wiring Board:
•
•
Y
: parts extracted from the conductor side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
Pattern face side:
Parts on the pattern face side seen from
(Conductor Side)
the pattern face are indicated.
Parts face side:
Parts on the parts face side seen from
(Component Side) the parts face are indicated.
Note on Schematic Diagram:
• All capacitors are in
• All capacitors are in
µ
F unless otherwise noted. pF:
µµ
F
50 WV or less are not indicated except for electrolytics
and tantalums.
and tantalums.
• All resistors are in
Ω
and
1
/
4
W or less unless otherwise
specified.
•
A
: B+ Line.
• Power voltage is dc 14.4V and fed with regulated dc power
supply from CD changer controller.
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : CD PLAY
no mark : CD PLAY
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal produc-
tion tolerances.
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
J
: CD PLAY
Note: The components identified by mark
0
or dotted line
with mark
0
are critical for safety.
Replace only with part number specified.
CDX-848X
2
2
• Semiconductor
Location
Ref. No.
Location
IC101
H-6
IC201
J-5
Q101
F-7
Q102
H-7
PRINTED WIRING BOARDS – RF/LSW Boards –
C201
C121
C105
SW1
CHUKING
END DETECT
SW2
SAVE END
DETECT
CN102
IC201
C102
Q101
TP101
TP102
TP108
TP107
TP104
TP103
TP105
TP106
IC101
C217
C203
C204
C205
C206
C207
C208
C202
C106
C209
C109
C104
C122
C107
C111
C101
R201
R202
R203
R204
R206
R205
R207
R208
R210
R209
R211
R212
R214
R213
R218
R219
R220
R222
R223
R104
R215
R216
R108
R109
R110
R117
R112
R113
R107
R105
R101
R103
R102
C103
R120
R121
R122
R106
C108
Q102
R119
CNJ101
SW3
(LIMIT)
BLU
YEL
YEL
RED
BLK
WHT
1-679-422-
12
(12)
M101
(SLED)
M
LSW BOARD
M103
(CHUKING)
M
OPTICAL
PICK-UP
BLOCK
(KSS-720A)
OP FLEXIBLE
BOARD
MAIN FLEXIBLE
BOARD
MAIN BOARD
TP
(TE)
TP
(VC)
A
M102
(SPINDLE)
M
BLK
RED
YEL
BLU
1-679-421-
12
(12)
TP
(RFAC)
1-679-421-
12
(12)
B
C
D
E
F
G
H
I
J
K
1
2
3
4
5
6
7
8
9
10
11
12
13
A
Click on the first or last page to see other CDX-848X service manuals if exist.