Sony NWZ-ZX1 Service Manual ▷ View online
NWZ-ZX1
21
2-14. LCD MODULE (LCD1)
sheet (FPC)
touch panel flexible board
3DVWLQJSRVLWLRQRIVKHHW)3&
guide line
adhesive sheet
(LCD FPC)
(LCD FPC)
LCD flexible board
3DVWLQJSRVLWLRQRI/&'IOH[LEOHERDUG
guide line
2 Peel off the LCD flexible board from
the adhesive sheet (LCD FPC).
Note
1:
Please peel off carefully so
as not to damage.
–5HDUWRSYLHZ–
1 sheet (FPC)
7 adhesive sheet
(window_top)
(window_top)
–5HDUERWWRPYLHZ–
hole
–/&'PRGXOHIURQWYLHZ–
LCD flexible board
3DVWLQJSRVLWLRQRIVKHHW73
guide line
HI-RES label
3DVWLQJSRVLWLRQRI+,5(6ODEHO
4.55 mm
3 Peel off the adhesive sheet (window_top)
from the cabinet (front) block.
4 Peel off the adhesive sheet (window_side)
from the cabinet (front) block.
5 Peel off the LCD module block from
the adhesive sheet (window_bottom).
cabinet (front) block
6 Draw out the LCD flexible board and
the touch panel flexible board from hole.
Note
2:
Please pull it out carefully so
as not to damage.
8 adhesive sheet (window_side)
8 adhesive sheet
(window_side)
(window_side)
9 sheet (TP)
0 HI-RES label
qa LCD module (LCD1)
guide line
touch panel flexible board
sheet (TP)
3.6 mm
LCD module (LCD1)
4 Peel off the adhesive sheet (window_side)
from the cabinet (front) block.
NWZ-ZX1
22
2-15. HP BOARD
HP board
3DVWLQJSRVLWLRQRIVKHHW+3
guide line
guide line
sheet (HP)
1 adhesive sheet (window_bottom)
–5HDUWRSYLHZ–
2 screw (PTP B1.4)
sheet (HP)
HP board
–+3ERDUGUHDUYLHZ–
Fold the sheet (HP).
3 screw (M1.4)
4 Draw out the HP jack
from
from
hole.
5 sheet (HP)
6 HP board
NWZ-ZX1
23
SECTION 3
SERVICE MODE
1. PREPARATION OF SERVICE MODE
Prepare the following before checking service mode.
Prepare the following before checking service mode.
• Windows
PC
•
USB cable for the WM-PORT (accessory)
•
Service mode install tool and service mode uninstall tool
(ServiceModeTool_for_NWZZX1.zip)
• Newest
• Newest
fi rmware update tool
Note: Confi rm the method of obtaining each tool to each service head-
quarters.
2. INSTALLING METHOD OF THE SERVICE MODE
TOOL
Procedure:
1. On PC, unzip the “ServiceModeTool_for_NWZZX1.zip”, and
1. On PC, unzip the “ServiceModeTool_for_NWZZX1.zip”, and
confi rm that the “ServiceModeInstaller-20131105A” folder
has been created.
has been created.
2. Connect PC and “WALKMAN” with the USB cable for the
WM-PORT (accessory).
USB cable
Plug in the USB cable
with facing upward,
making sure the
connection is secure.
with facing upward,
making sure the
connection is secure.
3. Confi rm that the USB connection screen is displayed on
“WALKMAN”, then confi rm that “USB storage in use” is dis-
played.
played.
Note 1: If the USB connection screen is not displayed, swipe the status bar
on the top of the screen then tap “USB connected” on the notifi ca-
tion panel.
tion panel.
USB storage in use
USB mass storage
6:09
Before turning off USB storage, unmount
(”eject”) your Android’s USB storage from
your computer.
Turn off USB storage
4. On PC, confi rm that “WALKMAN” drive has been recog-
nized.
(In this example, “WALKMAN” is recognized as F drive)
Note 2: When Windows XP is used, after recognizing a drive, the instal-
lation screen of a driver may be displayed. In that case, install a
driver according to screen.
driver according to screen.
5. On PC, open the “ServiceModeInstaller-20131105A” folder,
and start “Digital Player Software Update tool” by double-
clicking “FWUpdater.exe”.
clicking “FWUpdater.exe”.
6. On PC, check into the [I agree] box on “Digital Player Soft-
ware Update tool”, and click the [Next] button.
Note 3: The language displayed in “Digital Player Software Update tool”
changes with linguistic environment of PC.
7. On
PC,
confi rm that all applications are terminated, and click
the [OK] button on “Digital Player Software Update tool”.
8. On PC, confi rm that the following screen is displayed, and
click the [OK] button on “Digital Player Software Update
tool”.
tool”.
NWZ-ZX1
24
9. On PC, wait for a while until progress will be 100%.
Note 4: “WALKMAN” is rebooted automatically.
10. On PC, confi rm that the following screen is displayed, and
click the [Finish] button on “Digital Player Software Update
tool”.
tool”.
Note 5: The contents which have failed in updating may be displayed,
but there is no problem.
11. Confi rm that the following screen is displayed on “WALK-
MAN”, and tap the [OK] button.
USB storage in use
USB mass storage
6:09
Before turning off USB storage, unmount
(”ejecte”) your Android’s USB storage from
your computer.
Turn off USB storage
System Update
Update to version NONE
completed successfully.
completed successfully.
OK
12. Tap “ ” (Apps) on “WALKMAN”, and the list of applications
is displayed.
(The
following
fi gure is example of display)
13. Confi rm that two icons (“DiagTestMode” and “ServiceMo-
deTool”) are displayed.
(The display position in the following fi gure is an example)
14. On PC, unmount the USB storage, and disconnect the USB
cable for the WM-PORT (accessory) from PC and “WALK-
MAN”.
MAN”.
Click on the first or last page to see other NWZ-ZX1 service manuals if exist.