Sony NAS-S55HDE / NAS-SC55PKE / SS-S55HDE Service Manual ▷ View online
NAS-S55HDE/SS-S55HDE
13
Note: Follow the disassembly procedure in the numerical order shown below.
3-2. PANEL (SIDE L/R) ASSY
Note: This illustlation sees the set from back.
3-3. COVER (BASE) ASSY, PANEL (TOP) BLOCK
#
"
Remove the panel (side L) assy
in the direction of arrow ".
two screws
(BVTP3
× 8)
Remove the panel (side R) assy
in the direction of arrow #.
two screws
(BVTT3
× 6)
two screws
(BVTP3
× 8)
two screws
(BVTT3
× 6)
RB
two screws
(BVTP3
× 8)
cover block assy
three claws
three claws
three screws
(BVTP3
× 8)
R two screws
(BVTP3
× 8)
connector
(CN4002)
connector
(CN852)
flat type wire (15 core)
(CN8)
RT panel (top) block
R two screws
(BVTP3
× 8)
two screws
(BV3
× 8)
connector
(CN702)
NAS-S55HDE/SS-S55HDE
14
3-5. MODULE
(LCD)
Note: This illustlation sees the LCD block from back.
"
two screws
(P2.6
× 6)
bearing assy
four claws
two claws
five claws
bearing assy
Slide the case (LCD B)
in the direction of arrow ".
shield plate
R LCD board
LCD module flexible board
(CN2501,
CN2502)
cord (with connector)
(CN2504)
RG cushion (LCD)
RH cushion (LCD)
RB four claws
RT window (LCD) assy
RG cushion (LCD)
RE cushion (LCD)
RI LCD module
flat type wire (9 core)
(CN2503)
three screws
(P2.6
× 6)
3-4. PANEL (TOP) BOARD, LCD BLOCK
Note: This illustlation sees the panel (top) block from inside.
RK
RB seven screws
(BVTP2.6)
RT base (LCD) assy
two grounds
screw (BVTP2.6)
RE two screws
(BVTP2.6)
RG cover (bearing)
flat type wire (9 core)
(CN851)
claw
screw (BVTP3 × 8)
nine screws
(BVTP2.6)
ground
R panel (top) board
clamp
claw
flat type wire (15 core)
(CN850)
RI cover (bearing)
RH two screws
(BVTP2.6)
RL LCD block
NAS-S55HDE/SS-S55HDE
15
3-6. PANEL (FRONT) BLOCK
screw
(BV3
× 8)
flat type wire (11 core)
(CN852)
screw
(BVTP3
× 8)
guround terminal
two screws
(BVTP3
× 8)
panel (front) block
screw
(BV3
× 8)
3-7. KNOB (VOL), PANEL (FRONT) BOARD
Note: This illustlation sees the panel (front) block from inside.
nine screws
(BVTP2.6)
PANEL (FRONT) board
Note: String is hung on the root of knob (VOL), string is pulled
and knob (VOL) is removed as shown in the figure.
two claws
knob (VOL)
string
NAS-S55HDE/SS-S55HDE
16
3-8. CHASSIS
(TOP)
3-9. MOTHER BOARD
screw
(BVTP3
× 8)
chassis (top)
three screws
(BVTP3
× 8)
three screws
(BVTP3
× 8)
three screws
(BVTP3
× 8)
two screws
(BV3
× 8)
screw
(PWH3
× 8)
flat type wire (7 core)
(CN9201)
two connectors
(CN1,
CN12)
R MOTHER board
screw
(BVTT3
× 8)
flat type wire (11 core)
(CN510)
connector
(CN7)
flat type wire (5 core)
(CN512)
flat type wire (19 core)
(CN513)
Click on the first or last page to see other NAS-S55HDE / NAS-SC55PKE / SS-S55HDE service manuals if exist.