Sony NAS-S55HDE / NAS-SC55PKE / SS-S55HDE Service Manual ▷ View online
NAS-S55HDE/SS-S55HDE
17
3-10. SP/DM BOARD
connector
(CN6102)
ferrite core
SP/DM board
three screws
(BVTP3
× 8)
flat type wire (11 core)
(CN6100)
two screws
(BVTP3
× 8)
heat sink
radiation sheeh
3-11. MAIN BOARD
two connectors
(CN108,
CN110)
RE clamp
flat type wire (11 core)
(CN110)
RT screw
(BVTP3
× 8)
RG MAIN board
RB four screws
(BVTP3
× 8)
R power cord connector
(CN201)
flat type wire (15 core)
(CN141)
flat type wire (15 core)
(CN701)
flat type wire (7 core)
(CN109)
flat type wire (11 core)
(CN112)
flat type wire (11 core)
(CN114)
flat type wire (9 core)
(CN102) (UK model)
two connectors
(CN1,
CN851)
NAS-S55HDE/SS-S55HDE
18
3-12. HARD DISC DRIVE
3-13. FAN. DC (M101), CHASSIS (MID)
two screws
(6-32UNCX5)
chassis (HDD-L)
RE hard disc drive
HDD damper screw
chassis (mother)
claw
damper
screw
(BVTP3
× 8)
damper
HDD damper screw
two screws
(6-32UNCX5)
R chassis (HDD-R)
damper
HDD damper screw
RB harness
(for SATA power)
RT harness
(serial
ATA)
HDD damper screw
damper
fan, (DC)
(M101)
chassis (MID)
two screws
(PTP3
× 8BT)
sheet (insulating)
two screws
(PTP3
× 8BT)
three screws
(BVTP3
× 8)
screw
(PTP3
× 8BT)
two screws
(BVTP3
× 8)
two radiation sheets (S)
NAS-S55HDE/SS-S55HDE
19
3-14. CD BLOCK
CD block
insulating sheet (CD)
two screws
(BVTT3
× 6)
two connectors
two bushings (insulating)
two bushings (insulating)
two screws
(BVTT3
× 6)
Note: When installing a CD block,
please confirm the watch to have
bushing (insulating) (4 pcs) by the
last
process.
3-15. NOTE THE CD-ROM DRIVE AND INSULATING SHEET (CD) REPLACING
When replacing the insulating sheet (CD) or CD-ROM drive,
be sure to confirm that a CD-ROM drive and
chassis (base) do not conduct electricity with a tester.
be sure to confirm that a CD-ROM drive and
chassis (base) do not conduct electricity with a tester.
tester
CD-ROM drive
CD-ROM drive
(upper face)
(upper face)
chassis (base) assy
(bottomface)
(bottomface)
&
F
NAS-S55HDE/SS-S55HDE
20
3-16. CD-ROM DRIVE (CD-5010A-020)
3-17. POSITION OF FERRITE CORE FOR SPEAKER CORD
"
Note: This illustration shows the
disc tray as viewed from
the
bottom.
thin rod
CD block
hole
cushion (CD)
disc tray
Insert a thin rod into the hole and push it in the
arrow
" direction. (Disc tray will come out)
Peel the cushion (CD) a
little when it hides the hole.
CD-ROM drive
(CD-5010A-020)
bezel assy
three claws
two claws
panel (CD-L)
cord with connector (speaker)
sleeve ferrite clamp
150 mm
15 ± 5 mm
Pull out the cord
with connector (speaker).
Wrap in 2 turn as
diagram then lock it.
Make 2 set.
Click on the first or last page to see other NAS-S55HDE / NAS-SC55PKE / SS-S55HDE service manuals if exist.