DOWNLOAD Sony HMZ-T3 / HMZ-T3W (serv.man2) Service Manual ↓ Size: 12.23 MB | Pages: 71 in PDF or view online for FREE

                                                                                                       

2-8

① two screws (P1.7X4 ）

② two FFC

(CN701/801)

③ COVER,BOTTOM

④ KNOB.SLIDER

※ Because fall, move it 
below and take it off.

[Note]
When take off a KNOB.SLIDER, warn it not to transform a hook part.
When reuse it, confirm that there is not the transformation of the hook part.

                                                                                                       

2-9

1. The harness from SEN-1001 MOUNT

※ Put  it  inside  of  a 

COVER,BOTTOM.

[Note]
 Reassembe COVER,BOTTOM and OP UNIT SLIDE BUTTONs as follws.
(1)  Slide the lens units to each outermost position.
(2)  Fix the COVER,BOTTOM with screws.
(3)  Finally insert the OP UNIT SLIDE BUTTONs.
　   When reuse a KNOB.SLIDER, confirm that there is not the transformation of the hook part.

※ Slide the lens units to

 each outermost position.

※ Insert the parts as image.

[Note]
In reassembling the COVER,BOTTOM, position the harness as following images.

[Note]
To prevent power freeze problem, disconnect BATTERY HARNESS of the PB UNIT before that the HM cable will be connected 
and disconnected.
Disconnect and connect the harness again for the recovering, when the power freeze problem occurred.

HM CABLE

BATTERY

HARNESS

PB UNIT

                                  

2-10

① six screws(P1.7X4 ）

② two harnesses

(CN704/201)

③ DISPLAY UNIT

※ Do not fold.

 ・DISPLAY UNIT

   Note: Be sure not to fold two FPCs when handling the DISPLY UNIT.
             When assemble a DISPLAY UNIT, put away an FPC.

※ Put it

                                                                                                        

2-11

① one screw (SCW2.6X4 ）

②ADJUSTER ASSY, BAND(UP)

①four screws (P1.7X6）

② FH SLIDE BLOCK ASSY