Sony HMZ-T3 / HMZ-T3W (serv.man2) Service Manual ▷ View online
HMZ-T3/T3W
1-9
1-5. Work after having changed WIRELESS HD MODULE (HMZ-T3W only)
< Procedure >
1. Connect PU unit to AC through AC adaptor. (Fig.1)
2. Connect PU unit and PBU unit with HDMI cable. (Fig.1)
3. Connect JIG PC and PBU unit with Micro USB cable. (Fig.1)
4. Run HmzServiceTool.exe.
5. Click on “
Up Date” button. (Fig.2)
6. Make sure that “
1 HMD device(S)found.” is indicated on the Command Window screen.
7. Click on “
Wireless Pairing” button, and the unit is powered on automatically. (Fig.2)
8. Make sure that “OK! Wireless Pairing succeeded” popup window is displayed.(Fig.3)
9. Click on “
OK” button on the window .(Fig.3)
10.Disconnect all cables.
11.Press power button on PU and HMU unit to shut down it.
< Note >
Perform the Pairing (confirmation) when any Wireless HD Module on TX or RX was replaced.
Wireless
US
B
B
Battery
Jig PC
HDMI Out
Command
PBU
HMU
PU
HDMI/MHL
AC Adaptor
Fig.1
Fig.2
Fig.3
HMZ-T3/T3W
1-10
1-6. Factory reset & shutdown
Fig.2
< Procedure >
1. Connect PU unit to AC through AC adaptor. (Fig.1)
2. Connect PU unit and PBU unit with HDMI cable. (Fig.1)
3. Connect JIG PC and PBU unit with Micro USB cable. (Fig.1)
4. Run HmzServiceTool.exe.
5. Click on “
Up Date” button. (Fig.2)
6. Make sure that “
1 HMD device(S)found.” is indicated on the Command Window screen.
7. Click “
Factory Reset & Shutdown” button, and the unit is powered on automatically. (Fig.2)
8. Make sure that “OK! Factory reset and shut down completed” popup window is displayed. (Fig.3)
9. Click on “
OK” button on the popup window, the unit will shut down automatically. (Fig.3)
10.Disconnect each cables.
< Note >
This function returns the unit setting to Factory default mode.
Wireless
US
B
B
Battery
Jig PC
HDMI Out
Command
PBU
HMU
PU
HDMI/MHL
AC Adaptor
Fig.1
Fig.3
HMZ-T3/T3W
1-11
1-7. Check Firmware Version
< Procedure >
1. Connect PU unit to AC through AC adaptor. (Fig.1)
2. Connect PU unit and PBU unit with HDMI cable. (Fig.1)
3. Connect JIG PC and PBU unit with Micro USB cable. (Fig.1)
4. Run HmzServiceTool.exe.
5. Click on “
Up Date” button. (Fig.2)
6. Make sure that “
1 HMD device(S)found.” is indicated on the Command Window screen. (Fig.2)
7. Click on [
Enter Command Mode]button, and the unit is powered on automatically. (Fig.2)
8. Manually type “
Z
␣
88 ” to Command type in window and Click on [Execute]button. (Fig.2)
9. Make sure that result of Command Window screen. (Fig.2)
Ex: * 01 05 01 01 01 04
01 05
01 02 00 41
Method to read
： SASIC Version 01 05
DispCon Version 01 01
PBUCon Version 01 04
SUCon Version 01 05
1
st
DSP Version
01 02
2
nd
DSP Version
00 41
10. Click on [
Port Close] button. (Fig.2)
11. Disconnect all cables.
12. Press
power button on PU and HMU unit to shut down it.
Wireless
US
B
B
Battery
Jig PC
HDMI Out
Command
PBU
HMU
PU
HDMI/MHL
AC Adaptor
Fig.1
HMZ-T3/T3W
1-12
1-8. Update Firmware
1-8-1. For HMZ-T3
< Procedure >
1. Connect PU unit to AC through AC adaptor. (Fig.1)
2. Connect PU unit and PBU unit with HDMI cable. (Fig.1)
3. Connect JIG PC and PBU unit with Micro USB cable. (Fig.1)
4. Run HmzServiceTool.exe.
5. Click on “
Up Date” button. (Fig.2)
6. Make sure that “
1 HMD device(S)found.” is indicated on the Command Window screen. (Fig.2)
7. Click on “
Update Firmware” button (Fig.2), “HmdWriter” window will be displayed. (Fig.3)
8. Drag and drop a “
Target Firmware” in the “File Name” window. (Fig.3)
9. Make sure that the target firmware file name indicates on the “
File Name” window. (Fig.3)
10. Click on “
Start” button and the unit is powered on automatically.
*Click “
OK” button, if “PU connection Check Failed Continue? [OK] [Cancel] “pop up screen is indicated.
Do not perform power on the unit manually at this option.
11. Make sure that “
OK! Firmware update succeeded” popup window is displayed.
12. Click on “
OK” button on the popup window, the unit will shut down automatically.
13. Disconnect each cable.
< Note >
< Note >
1. Perform the upgrade to combined customer’s units without any mixed unit, because HMZ-T3 series ensure scheduled
performance by upgrade only by couple of PU unit, PBU unit and HMU unit.
2. LED Indication when upgrading.
PBU : Blinking green, PU : non-luminous
3. LED Indication when c
omplete the upgrade. PBU : non-luminous, PU : Lighting RED
Wireless
US
B
B
Battery
Jig PC
HDMI Out
Command
PBU
HMU
PU
HDMI/MHL
AC Adaptor
Fig.1
Fig.2
Fig.3
Click on the first or last page to see other HMZ-T3 / HMZ-T3W (serv.man2) service manuals if exist.