DOWNLOAD Sony HCD-ZX10 / MHC-ZX10 Service Manual ↓ Size: 7.92 MB | Pages: 75 in PDF or view online for FREE

5

This section is e

xtracted from

instr

uction man

ual.

You must set the time before using the timer
functions.

The clock is on a 24-hour system for the European
model, and on a 12-hour system for other models.

For illustration purposes, the 24-hour system
model is used.

Press MODE SELECT when the system
is turned off.

“Clock Set ?” appears.
When the system is in the Power Saving
Mode, “Clock Set ?” will not appear. Either
set Power Saving Mode off, or follow the
steps on the following page (“To change the
time”) after turning the power on.

Press PUSH ENTER.

The hour indication flashes.

?/1
(Power)

Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.

E

With normal use, the batteries should last for about
six months.  When the remote no longer operates the
system, replace both batteries with new ones.

If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.

Do the following to protect the CD mechanism.
Make sure that all discs are removed from the
unit.

1 Press FUNCTION repeatedly until “CD”

appears in the display.

2 Hold down V-GROOVE and press ?/1 so that

“LOCK” appears in the display.

E

e

e

Move the multi stick toward v or V
repeatedly to set the hour.

Move the multi stick toward B.

The minute indication flashes.

Move the multi stick toward v or V
repeatedly to set the minute.

Press PUSH ENTER.

Press MODE SELECT.

• Refer to the illustration to use the multi stick. Place

your finger on the center of the multi stick and
move in the direction you want (up/down or left/
right shown v/V or b/B in this manual).

                            

PUSH 

ENTER

• If you’ve made a mistake, start over from step 1.

The previous explanation shows you how to set
the time while the power is off. To change the
time while the power is on, do the following:

1 Press MODE SELECT repeatedly to select “Set

Up Mode”, then press PUSH ENTER.

2 Move the multi stick toward b or B repeatedly

to select “Timer Set Up ?”, then press PUSH
ENTER.

3 Move the multi stick toward b or B repeatedly

to select “Clock Set ?”, then press PUSH
ENTER.

4 Perform steps 3 through 6 on the left.

The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.

Up (v)

Right (B)

Left (b)

Down (V)

6

Sony Corporation      Printed in Malaysia

• To cancel the menu

• The items with asterisk (*)

cannot be selected depending on
the situation.

• The items in double box are not

in the menu. In order to select the
doublebox items, press the
corresponding buttons on the
front panel or on the remote.

• Select “Mode End” to finish the

menu operation.

1)

Cannot be selected during CD
playback.

2)

Cannot be selected during CD
program playback.

The numbers in parenthesis denotes the page number for the item.

Sound Mode

File Select  (33)

P File Memory  (37)

Equalizer Control  (36)

Cinema Space   (35)

Mode End

Set Up Mode

CD Set Up ?

TUNER Set Up ?

TAPE Set Up ?

Timer Set Up ?

Mode End

Display Set Up ?

Repeat Set Up ?  (22)

CD Edit Start ?   (30)

Program Set ?   (24, 27)

Mode End

Play Mode Set Up ?  (12)

TUNER Memory ?  (8)

TUNER Erase ?  (9)

Mode End

PTY Select ?  (38)

Direction Set Up ?  (13, 16, 18, 20)

Mode End

 

DOLBY NR Set Up ?  (14, 17, 19)

Mode End

Dimmer Set Up ?  (34)

Spectrum Set Up ?  (34)

Clock Set ?  (6)

Mode End

Timer Select ?  (42, 44)

Timer Set ?  (41, 43)

*

*

*

*

*

*

*

*

*

Effect OnpOff/OffpOn  (33)

PGM Check Clear  (25, 29)

Stereo Mono ?  (15)

1)

2)

7

1

× 8)

2

× 8)

3

4

5

1

7

2

3

4

5

6

× 6)

Note : Follow the disassembly procedure in the numerical order given.

8

1

× 8)

2

× 8)

3

5

× 8)

8

× 8)

6

× 8)

7

× 8)

9

× 8)

qa

× 8)

0

× 8)

1

2

3

qd

4

qs