Sony HCD-SBT100 / HCD-SBT100B / HCD-SBT300W / HCD-SBT300WB Service Manual ▷ View online
HCD-SBT100/SBT100B/SBT300W/SBT300WB
13
2-6. PANEL (FRONT) BLOCK-1
5 connector
(CN3001)
4 flexible flat cable (17P)
(CN506)
3 flexible flat cable
(9P)
(CN340)
1 flexible flat cable (8P)
(CN404)
6 connector
(CN906)
7 connector
Note 2: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Note 1: CN106 and CN340 are quantity of pins of the same.
Do not insert to the wrong connector absolutely.
There is a possibility that the unit may be damaged if the wrong.
Insert is shallow
Insert is straight
to the interior.
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG
–
Rear view
–
CN106
(US, CND)
7 Remove the flexible flat cable (9P)
from the coating clip.
ferrite core
(FC1)
(FC1)
cushion (S)
coating
clip
clip
MAIN board
)HUULWHFRUH)&VHWWLQJ
)HUULWHFRUH)&VHWWLQJ
20 to
25 mm
25 mm
2 flexible flat cable
(14P)
(CN407)
ferrite core
(FC2)
(FC2)
cushion (S)
15 to 20 mm
(;&(37(
Note 5: Cushion (S) and ferrite core (Ref. No. FC1, FC2)
are deleted from the midway of production.
(US and Canadian models)
)OH[LEOHIODWFDEOH3VHWWLQJ
coating clip
flexible flat cable (9P)
MAIN board
1HZW\SHFRDWLQJFOLS
)RUPHUW\SH5(/$<ERDUG
6 Remove the wire from
the coating clip.
Note 4: RELAY board is deleted from
the midway of production.
WireVHWWLQJ
Note 3: When installing the flexible flat cable, ensure the colored line.
No slanting after insertion.
colored line
colored line
Inserting is straight to the interior.
Inserting is slant.
flexible flat cable
flexible flat cable
connector
connector
OK
NG
Ver. 1.2
• Abbreviations
CND : Canadian model
E32
CND : Canadian model
E32
: 110 – 240V AC area in E model
HCD-SBT100/SBT100B/SBT300W/SBT300WB
14
2-8. PANEL (BACK) BLOCK
2-7. PANEL (FRONT) BLOCK-2
4 Draw out the wire.
4 Draw out
the
the
wire.
2 two screws (BV3)
2 two screws
(BV3)
(BV3)
5 panel (front) block
3 Remove the panel (front) block
in the direction of an arrow.
1 screw
(BVTP
(BVTP
S3
u 6)
1 screw
(BVTP
(BVTP
S3
u 6)
1 screw
(BVTP
(BVTP
S3
u 6)
–
Left view
–
–
Rear view
–
:LUHVHWWLQJ
Note: Arrange the wire so as not to overlap
with the screw hole of HP board.
2 three screws
(BVTP3
(BVTP3
u 8)
3 panel (back) block
2 two screws
(BVTP3
(BVTP3
u 8)
:LUHVHWWLQJ
6%7:6%7:%
1 Remove the antenna wire
from the coating clip.
coating clip
antenna wire
–
5HDUYLHZ
–
HCD-SBT100/SBT100B/SBT300W/SBT300WB
15
2-9. NET BOARD BLOCK (HCD-SBT300W/SBT300WB)
2-10. WiFi MODULE (WIFI1), NET BOARD (HCD-SBT300W/SBT300WB)
A
A
4 screw
(BVTP3
(BVTP3
u 8)
3 two screws
(BVTT3
(BVTT3
u 6)
2 tape
(sub
(sub
material)
1 antenna connector
(CON2)
(CON2)
5 NET board block
tape
(sub material)
(sub material)
:LUHVHWWLQJ
Note: Arrange the antenna wire so as not to overlap
with the screw hole of panel (rear).
antenna wire
NET board
2 connector
(CN5002)
4 cushion
(PORON
T5_5)
5 NET board
3 WiFi module (WIFI1)
1 two screws
(BVTT3
u 6)
Note 3: Cushion (PORON T5_5) is deleted
from the midway of production.
Note 1: When the complete NET board is replaced, refer to “CHECK-
ING METHOD OF NETWORK CONNECTION” on page 5.
Note 2: When the WiFi module (Ref. No. WIFI1) is replaced, refer to
“PROCESSING OF REPLACING THE WiFi MODULE (Ref.
No. WIFI1)”, “NOTE OF REPLACING THE WiFi MODULE
(Ref. No. WIFI1)” and “CHECKING METHOD OF NET-
WORK CONNECTION” on page 5.
No. WIFI1)”, “NOTE OF REPLACING THE WiFi MODULE
(Ref. No. WIFI1)” and “CHECKING METHOD OF NET-
WORK CONNECTION” on page 5.
Ver. 1.2
HCD-SBT100/SBT100B/SBT300W/SBT300WB
16
2-11. 2.4GHz ANTENNA (ANT1), HOLDER (ANTENNA) (HCD-SBT300W/SBT300WB)
5 screw
(BVTP3
(BVTP3
u 8)
2 tape
(sub
(sub
material)
4 2.4GHz antenna
(ANT1)
(ANT1)
coating clip
8 holder
(antenna)
(antenna)
7 Rotate the claw of holder
(antenna) in the direction of
an arrow, align the hole of
panel
(rear).
claw
:LUHVHWWLQJ
1 antenna connector
(CON2)
(CON2)
3 Remove the antenna
wire from the
coating
clip.
tape
(sub material)
(sub material)
:LUHVHWWLQJ
Note: Arrange the antenna wire so as not to overlap
with the screw hole of panel (rear).
antenna wire
antenna wire
NET board
6 boss
Click on the first or last page to see other HCD-SBT100 / HCD-SBT100B / HCD-SBT300W / HCD-SBT300WB service manuals if exist.