DOWNLOAD Sony HCD-PZ1D / MHC-PZ1D Service Manual ↓ Size: 6.6 MB | Pages: 108 in PDF or view online for FREE

PANEL  TEST  MODE
This mode is used to check the LEDs, button, MASTER VOL-
UME dial, OPERATION DIAL ring, system software version, 
DVD lib version, model name and destination.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [

x

] button, [DISC 3] button and [USB] button simul-

taneously.

3.  Power illuminator LEDs are lighted up.
4.  When you want to enter to the system software version display 

model, press the [DISC 1] button. The system software version 
appears on the LCD module.

 

Press the [DISC 1] button again, the DVD lib version appears 
on the LCD module.

5.  Press the [DISC 2] button the mode name and destination on 

the LCD module.

6.  Press the [DISC 3] button the key encode test mode is acti-

vated.

7.  In the key encode test mode, the LCD module displays “KEY 

0 0 0 0 0”. 

 

Each time a button pressed, change the each numbers.

•  To release from Panel Test Mode
1.  To release from this mode, press the [

x

] button, [DISC 3] but-

ton and [USB] button simultaneously.

DVD  SHIP  MODE (WITHOUT  MEMORY  CLEAR)
This mode moves the optical pick-up to the position durable to 
vibration. Use this mode when returning the set to the customer 
after repair.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [DVD] button, to set the “NO DISC” mode.
3.  Press the [

N

] button and [

?/1

] button simultaneously.

 

The system will turn off automatically.

4.  After the “STANDBY” blinking display fi nishes, a message 

“LOCK” appears on the LCD module and the DVD ship mode 
is set.

•  To release from DVD Ship Mode
1.  To release from this mode, press the [

?/1

] button.

DVD  SHIP  MODE (WITH  MEMORY  CLEAR)
This mode moves the optical pick-up to the position durable to vi-
bration and clears all data including preset data stored in the RAM 
to initial conditions after the power supply is turned off. Use this 
mode when returning the set to the customer after repair.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [DVD] button, to set the “NO DISC” mode.
3.  Press the [TUNING –] button, [DISC 3] button and [

?/1

] but-

ton simultaneously.

4.  After the “STANDBY” blinking display fi nishes, a message 

“COLD RESET” appears on the LCD module and the DVD 
ship mode is set.

•  To release from DVD Ship Mode
1.  To release from this mode, press the [

?/1

] button.

DISC  THEFT  PREVENTION  MODE
This mode let you lock the disc tray. When this mode is activated, 
the disc tray will not open.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [DVD] button.
3. Press 

the 

[

x

] button and [OPEN/CLOSE 

Z

] button simulta-

neously and hold down until “LOCKED” or “UNLOCKED” 
appears on the LCD module (around 5 seconds).

•  To release from Disc Theft Prevention Mode
1.  This mode will not be deselected only by turning the power 

off. To exit from the mode, perform the above item 3 again.

AM  TUNER  STEP  CHANGE
The step interval of AM channels can be toggled between 9 kHz 
and 10 kHz.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [TUNER/BAND] button repeatedly to select the 

“AM”.

3.  Press the [

?/1

] button to turn off the system.

4.  Press the [TUNING +] button and [

?/1

] button simultane-

ously. The system will turn on automatically.

5.  The message “AM 9K STEP” or “AM 10K STEP” appears on 

the LCD module and thus the channel step change.

VIDEO/SAT  FUNCTION  CHANGE
This mode let you change from VIDEO to SAT and vice-versa.

Procedure:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [VIDEO/SAT] button.
3.  Press the [VIDEO/SAT] button and [

x

] button simultaneously. 

The function will change to SAT.

4.  Press the same button again to change from SAT to VIDEO.

VACS  DISPLAY  MODE
The VACS level can be displayed.

Procedure:
1.  Press the [\/1] button to turn on the system.
2.  Press the [TUNING –] button, [DISC 1] button and [PRESET 

EQ] button simultaneously.

3.  The VACS level appears on the LCD module.

VACS  ON/OFF  CHANGE  MODE
The VACS on/off can be changed.

Procedure:
1.  Press the [\/1] button to turn on the system.
2.  Press the [TUNING –] button, [DISC 2] button and [PRESET 

EQ] button simultaneously.

3.  The VACS on/off is changed.

DVD  OFF  LINE  MODE
The system can be turned on under the situation not connected 
with the CD mechanism deck.

Procedure:
•  To enter DVD Off Line Mode
1.  Press the [\/1] button to turn off the system.
2.  Press the [REC TO USB] button, [DISC 3] button and [\/1] 

button simultaneously.

3.  The message “DVD OFF LINE MODE” appears on the LCD 

module.

•  To release from DVD Off Line Mode
1.  To release from this mode, press the [\/1] button.

DVD  SERVICE  MODE
This mode let you make diagnosis and adjustment easily by using 
the remote commander and the TV. The instructions, diagnostic 
results, etc. are given on the on-screen display.

•  TEST DISC LIST
 

Be sure to use the DVD disc that matches the signal standards 
of your region.
• CD
   

 

  YEDS-18  (Part No. 3-702-101-01)

   

 

  PATD-012  (Part No. 4-225-203-01)

•  DVD SL (Single Layer)
   

NTSC :  HLX-503  (Part No. J-6090-069-A)

   

 

  HLX-504  (Part No. J-6090-088-A)

   

PAL  :  HLX-506  (Part No. J-6090-077-A)

•   DVD DL (Double Layer)
   

NTSC :  HLX-501  (Part No. J-6090-071-A)

   

 

  HLX-505  (Part No. J-6090-089-A)

   

PAL  :  HLX-507  (Part No. J-6090-078-A)

•  Procedure to enter to DVD Service Mode:
1.  Press the [

?/1

] button to turn on the system.

2.  Press the [DVD] button.
3.  Press the [

x

] button and [OPEN/CLOSE 

Z

] button simultane-

ously and then turn the [MASTER VOLUME] dial clockwise.

4.  The message “SERVICE IN” appears on the LCD module and 

the Top Menu of Remocon Diagnosis Menu appears on the on-
screen display on the TV. The model name, main unit’s micom 
version information (IF-con) and DVD fi rmware version infor-
mation (Syscon) are displayed at the bottom of the on-screen 
display.

 

Remocon Diagnosis Menu

0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History
4. Version Information

Model Name
IF-con
Syscon

: CMP_LA
: Ver.  00.06 (0000)
: Ver.  0.204

5.  To execute each function, press its number by using numeric 

button on the remote commander.

6.  To release from this mode, press the [

?/1

] button to turn off 

the system.

•  Execute IOP Measurement
 

In order to execute IOP measurement, the following standard 
procedures must be followed.

1.  From the Top Menu of Remocon Diagnosis Menu, select “2. 

Drive Manual Operation” by pressing the [2] button on the 
remote commander. The following screen appears on the on-
screen display.

 

Drive Manual Operation

1. Servo Control
2. Track/Layer Jump
3. Manual Adjustment
4. Mecha test mode
5. MIRR time Adjust
0. Return to Top Menu

2.  Select “3. Manual Adjustment” by pressing the [3] button on 

the remote commander. The following screen appears on the 
on-screen display.

 

Manual Adjust

1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eg Boost Adjust:
6. Iop:
7. TRV. Level:
8. S curve (FE) Level:
9. RFL (PI) Level:
0. MIRR Time:

O

 

o Change Value

RETURN  Return to previous menu

3.  Select “6. Iop:” by pressing the [6] button on the remote com-

mander.

4.  Wait until a hexadecimal number appears in the on-screen dis-

play as below:

 

Manual Adjust

1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eg Boost Adjust:
6. Iop. 48
7. TRV. Level:
8. S curve (FE) Level:
9. RFL (PI) Level:
0. MIRR Time:

O

 

o Change Value

RETURN  Return to previous menu

5.  Convert data from hexadecimal to decimal by using conver-

sion table.

6. Please 

fi nd the label on the rear of the BU (Base Unit).

 

The default IOP value is written in the label.

7.  Subtract between these two values.
8.  If the remainder is smaller than 93 (decimal), then it is OK.
 

However if the value is higher than 93, then the BU is defec-
tive and need to be change.

9.  Press the [RETURN] button on the remote commander to re-

turn to previous menu.

10. Press the [0] button on the remote commander to return to the 

Top Menu of Remocon Diagnosis Menu.

11.  Press the [

?/1

] button to turn off the system.

•  Check Emergency History
 

To check the emergency history, please follow the following 
procedure.

1.  From the Top Menu of Remocon Diagnosis Menu, select “3. 

Emergency History” by pressing the [3] button on the remote 
commander. The following screen appears on the on-screen 
display.

 

Emg. History Check

1.  01  05  04  04

Laser Hours

CD

999h

59min

DVD

999h

59min

00  92  46  00

00  00  00  00

00  00  23  45

2.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

Next   Next Page

Prev   Prev Page

O  Return to Top Menu

2.  You can check the total time when the laser is turned on during 

playback of DVD and CD from the above menu. The maxi-
mum time, which can be displayed are 999h 59min.

3.  You can check the error code of latest 10 emergency history 

from the above menu. To view the previous or next page of 
emergency history, press the [

.

] button or [

>

] button 

 

on the remote commander. The error code consists of

 

Example of Error code

1.  01  05  04  04

00  92  46  00

00  00  00  00

00  00  23  45

 

The meaning of error code is as below:

 

01: Communication error (No reply from syscon)

 

02: Syscon hung up

 

03: Power OFF request when syscon hung up

 19: 

Thermal 

shutdown

 

24: MoveSledHome error

 

25: Mechanical move error (5 Changer)

 

26: Mechanical move stack error

 

30: DC motor adjustment error

 

31: DPD offset adjustment error

 

32: TE balance adjustment error

 

33: TE sensor adjustment error

 

34: TE loop gain adjustment error

 

35: FE loop gain adjustment error

 

36: Bad jitter after adjustment

 

40: Focus NG

 

42: Focus layer jump NG

 

51: Spindle stop error

 

52: Open kick spindle error

 

60: Focus on error

 

61: Seek fail error

 

62: Read Q data/ID error

 

70: Lead in data read fail

 

71: TOC read time out (CD)

 

80: Can’t buffering

 

81: Unknown media type

•  Parameter of error code
 

This is the detail of error code.

 

Example of Error code

1.  01  05  04  04

00  92  46  00

00  00  00  00

00  00  23  45

•  Time of error code
 

This is the laser time when an error occurred.

 

Example of Error code

1.  01  05  04  04

00  92  46  00

00  00  00  00

00  00  23  45

To clear the Laser Hours
Press the [

 DISPLAY] button and then press the [CLEAR] but-

ton. The data for both CD and DVD data are reset.

 

Emg. History Check

1.  01  05  04  04

Laser Hours

CD

0h

0min

DVD

0h

0min

00  92  46  00

00  00  00  00

00  00  23  45

2.  02  02  01  01

00  A9  4B  00

00  00  00  00

00  00  23  45

Next   Next Page

Prev  Prev Page

O  Return to Top Menu

To clear the Emergency History
Press the [DVD TOP MENU] button and then press the [CLEAR] 
button.
The error code for all emergency history would be reset.

 

Emg. History Check

1.  00  00  00  00

Laser Hours

CD

999h

59min

DVD

999h

59min

00  00  00  00

00  00  00  00

00  00  00  00

2.  00  00  00  00

00  00  00  00

00  00  00  00

00  00  00  00

Next   Next Page

Prev   Prev Page

O  Return to Top Menu

To clear the Initialize Setup Data
Press the [DVD/TUNER MENU] button and then press the 
[CLEAR] button on the remote commander.

 

Emg. History Check

Initialize setup data...

Laser Hours

CD

999h

59min

DVD

999h

59min

Next   Next Page

Prev   Prev Page

O  Return to Top Menu

To return to the Top Menu of Remocon Diagnosis Menu
Press the [0] button on the remote commander.

•  Check Version Information
 

To check the version information, please follow the following 
procedure.

1.  From the Top Menu of Remocon Diagnosis Menu, select “4. 

Version information” by pressing the [4] button on the remote 
commander. The following screen appears on the on-screen 
display.

 

Version information

O  Return to Top Menu

Firm (Main) :  Ver. xxxxx
Firm (Sub) :  xxxxx
RISC :   xxxxx
8032 :   xxxxx
Audio DSP :  xxxxx
Servo DSP :  xxxxx

 

To return to the Top Menu of Remocon Diagnosis Menu, press 
the [0] button on the remote commander.