DOWNLOAD Sony HBD-NF7220 Service Manual ↓ Size: 13.09 MB | Pages: 122 in PDF or view online for FREE

3.  Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1] 

Moves to Diag screen

[2] 

Moves to Log screen

[3] 

Moves to Factory Initialize screen

[4] 

Moves to Network screen

[5] 

Moves to Version Up screen (Not used)

[6] 

Moves to System Information screen

[7] 

Moves to EMC test mode screen (Not used)

[8] 

Moves to Drive screen

[9] 

Moves to HDD mode (Not used)

[

M

]/[

m

]  Moves the cursor

[ ] 

Moves to the screen of the item selected with the cursor

*  Cursor is not displayed when the menu is fi rst displayed.

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive

4.  Diag (Device Test)
This screen is used to test devices mounted on the board.

Screen 1: Selects the test category
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[ ] 

Moves to the selected category

[RETURN]  Returns to the service top menu

Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[

<

]/[

,

]  Selects the device to test

[ ] 

Executes the test

[M] 

Returns to selection of test category

[RETURN]  Returns to selection of test category

•  List of test categories
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)
Bluetooth Device Test

 Diag

 Diag

•  Device test  : List of devices
USB HOST 

: USB media check (front). Only one time.

D/A Converter  : Not used in this unit.
Ifcon 

: Not used in this unit.

MIC 

: Not used in this unit.

MFI 

: Not used in this unit.

IPC 

: Not used in this unit.

External HDMI : Not used in this unit.
Transcorder 

: Not used in this unit.

5.  Diag (Video/Audio Test)
This screen performs video and audio tests.

Screen 1: When video test category is selected
Operation:
[ ] 

Shows/hides the color bar

[

M

]/[RETURN]  Returns to the selection of test category

Screen 2: When audio test category is selected
Operation:
[ ] 

Plays back/stops the tone sound

[

M

]/[RETURN]  Returns to the selection of test category

• Video 

test:

Outputs a color bar (HDMI).

• Audio 

test:

TONE sound output (speaker & HDMI).

 Diag

 Diag

6.  Diag (Audio Input Test)
This screen performs audio input test.

Screen 1: Selects the audio input test category
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[ ] 

Activate to the selected category

[RETURN]  Returns to the service top menu

Screen 2: Select input device
After “Audio Input Test” selects in screen 1, the device to test is 
chosen.
Operation:
[M]/[

m

] 

Selects the device

[ ] 

Start and stop the test

[RETURN]  Returns to selection of test category

Screen 3: Select Digital Input 1
Operation:
[M]/[

m

] Select 

Test

[ ] 

Activate and Start/Stop Input Sound

[RETURN]  Return to audio input test

•  Device test  : Device List
Digital input 1  : IC101 (MB1305 board) is inputted from optical.
Digital input 2  : IC101 (MB1305 board) is inputted from ARC.
Analog input  : IC101 (MB1305 board) is inputted from audio.

•  Audio input test:
IC101 (MB1305 board) is inputted from DIR/analog and outputs 
line-out (8 ch) L and R.
Check tone sound by speaker connected with line-out (8 ch) L and
R.
(Input: LPCM 48 kHz (2 ch))

Category : 

Audio Input Test c Digital Input 1 

Note: The [2] Coaxial Test is not used for this model.

 Diag
Category: 

 Diag

Category : 

Audio Input Test c Digital Input 1 

7.  Diag (Wireless LAN Test)
This screen performs wireless LAN test.

Screen 1: Selects the wireless LAN test category
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[ ] 

Moves to the selected category

[RETURN]  Returns to the service top menu

Screen 2: Wireless LAN test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check

Operation:
[M]/[

m

] 

Selects the device

[ ] 

Executes the test

[RETURN]  Returns to selection of test category

Screen 2: Select [1] Show WLAN HwInfo
(Displayed characters/values in the following fi gure are example)
•  Viewing the display
Serial  : Serial number
Hard  : Hardware version
Mac 

: Mac address

Screen 3: Select [2] Connect to AccessPoint
Connect access point only with the following AP settings.
CERT : 

NO-ENCRYPT

WEPKEY : 

abcdef1234

PMK : 

ABCDE12345

SSID : 

SONY-Test-R

IPADDR : 

192.168.1.100

NETMASK : 

255.255.255.0

BROADCAST : 

192.168.1.10

When connect to AP, Status is “Connected!”
When cannot connect to AP, Status is “can’t Connect!”

Screen 4: Select [3] Start Display RSSI Value
(Displayed characters/values in the following fi gure are example)
RSSI value is displayed.

Screen 5: Select [4] Start Ping Test
Ping test is executed (IP address use the value of “192.168.1.10”).
OK: “192.168.1.10 OK!” is displayed
NG: “192.168.1.10 failed!” is displayed

Screen 6: Select [5] Write P2P address to Registry
•  Viewing the display
P2P device address : xx:xx:xx:xx:xx:xx
When write P2P address to registry is OK: “Write Successful!” is 
displayed
When write P2P address to registry is NG: “Write Fail!” is displayed

Screen 7: Select [6] P2P Registry Check
Check the P2P Registry address is the same as displayed in Screen 6.

 Diag

 Diag
Category: 

 Diag
Category: WirelessLAN 

 Diag
Category: 

 Diag
Category: 

 Diag
Category: 

 Diag
Category: 

Note: Not used for the servicing.

Note: Not used for the servicing.

Note: Not used for the servicing.

11. Diag (Bluetooth Device Test)
This screen performs Bluetooth device test.

Screen 1: Selects the Bluetooth device test category
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[ ] 

Activate to the selected category

[RETURN]  Returns to the service top menu

Screen 2: Bluetooth device test
[1] Bluetooth Enable
[2] Bluetooth Disable
[3] Write Bluetooth device address to Registry
[4] Bluetooth Inquiry Test
Operation:
[M]/[

m

] 

Selects the device

[ ] 

Executes the test

[RETURN]  Returns to selection of test category

Screen 2: Select [1] Bluetooth Enable
•  Viewing the status display
OK: “Bluetooth Enable Successful!” is displayed
NG: “Bluetooth Enable Fail!” is displayed

Screen 3: Select [2] Bluetooth Disable
•  Viewing the status display
OK: “Bluetooth Disable Successful!” is displayed
NG: “Bluetooth Disable Fail!” is displayed

Screen 4: Select [3] Write Bluetooth device address to 
Registry
(Displayed characters/values in the following fi gure are example)
Bluetooth device address is displayed.
•  Viewing the status display
OK: “Write Successful!” is displayed
NG: “Write Fail!” is displayed

 Diag

 Diag
Category:            Bluetooth Device Test