Sony HBD-N590 / HBD-N790W / HBD-N890W / HBD-N990W / HBD-N995W / HBD-T79 Service Manual ▷ View online
HBD-N590/N790W/N890W/N990W/N995W/T79
29
6. The message “Close” appears, and press the [
] button on the
remote commander.
Initialize Personal Information
Close
Initialization complete.
7. Select “Reset to Factory Default Settings”, and press the [
]
button on the remote commander.
Initialize Personal Information
Reset to Factory Default Settings
Restore each setting to the factory d
Restore each setting to the factory d
8. Select “All Settings”, and press the [
] button on the remote
commander.
Reset to Factory Default Settings
Parental Control Settings
Music Settings
System Settings
Network Settings
External Input Settings
All Settings
Music Settings
System Settings
Network Settings
External Input Settings
All Settings
9. Select “Start”, and press the [
] button on the remote com-
mander.
All Settings
Restore all settings to the factory default
settings. The system will turn off after
reset.
settings. The system will turn off after
reset.
Start
Cancel
10. Initialization ends when the message “WELCOME” on the
fl uorescent indicator tube disappears.
BD SERVICE MODE
[Wireless checking fail on M07.R.179]
Due to software bug in M07.R.179, currently Service mode do not sup-
port wireless checking features this version of software.
For service to confi rm the wireless checking, please update customer
sets to latest version of software. By using network upgrade method
or Disc upgrade method. After fi nish upgraded, Service member can
perform wireless checking as mention in wireless LAN checking pages.
Due to software bug in M07.R.179, currently Service mode do not sup-
port wireless checking features this version of software.
For service to confi rm the wireless checking, please update customer
sets to latest version of software. By using network upgrade method
or Disc upgrade method. After fi nish upgraded, Service member can
perform wireless checking as mention in wireless LAN checking pages.
Or
Confi rm wireless LAN connection from customer mode, in case of
Wireless connection successfully establish. The wireless Lan network
connection will be judge as OK.
Wireless connection successfully establish. The wireless Lan network
connection will be judge as OK.
Date: 26 January 2011
Note: The operation in this mode must use a remote commander and TV
monitor.
Setting method of the BD service mode:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press button in order of the [DISPLAY]
[0] [2] [1]
[SUBTITLE] on the remote commander. (Make the interval
when each button is pressed within two seconds)
when each button is pressed within two seconds)
4. Enter the BD service mode. The OSD menu on TV monitor
can be operated by remote commander.
1. Main Functions
• Diag
• Diag
Performs unit test of devices installed on the board.
•
Display Error Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version
Up
Not
used.
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not
used.
• Drive
Write drive OP data and check drive.
• HDD
mode
Not
used.
HBD-N590/N790W/N890W/N990W/N995W/T79
30
2. Menu Tree
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode
Version Up
Not used
Not used
System Information
Displays system information
Displays system information
Factory Initialize
Initialize default setting
Initialize default setting
Log
Displays Error Log
Displays Error Log
Error Log
Displays error log
Diag
Network
Network diagnosis for wired
Network diagnosis for wired
Ping
Ifconfig
View network status
Confirm network connection
HDD log
Device Test
Front US%D$CIFcon test
Front US%D$CIFcon test
Video Test
Video output test
Video output test
$udio Test
$udio output test
$udio output test
$udio Input Test
Not used
Not used
:ireless L$N Test
Not used
Not used
EMC Test Mode
Not used
Not used
Drive
Write drive OP data and check drive
Write drive OP data and check drive
HDD Mode
Not used
Not used
Start Update
Not used
Start Initialize
Initialize default setting fot the unit
Diag Test
Transcoder Test
Not used
Not used
HDMI Input Test
Not used
Not used
Mic Test
Not used
Not used
Not used
HBD-N590/N790W/N890W/N990W/N995W/T79
31
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen
[2]
Moves to Log screen
[3]
Moves to Factory Initialize screen (Not used)
[4]
Moves to Network screen
[5]
Moves to Version Up (DISC version update) screen (Not
used)
used)
[6]
Moves to System Information screen
[7]
Moves to EMC test mode screen (Not used)
[8]
Moves to Drive screen
[9]
Moves to HDD mode (Not used)
[
M
]/[
m
] Moves the cursor
[
]
Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
Service Mode Menu
[1] Diag
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
HELP : [DOWN] [ENT] [(NUM)]
HELP (currently available keys, etc.) is displayed
[1] Diag
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test
[
]
Executes the test
[
M]
Returns to selection of test category
[RETURN] Returns to selection of test category
•
List of test categories
Device Test
Video Test
Audio Test
Audio Input Test (not used)
Wireless LAN Test (not used)
Mic Test (not used)
HDMI Input Test (not used)
Transcoder Test (not used)
Video Test
Audio Test
Audio Input Test (not used)
Wireless LAN Test (not used)
Mic Test (not used)
HDMI Input Test (not used)
Transcoder Test (not used)
Diag
Category:
Diag
Category: Device Test
Device:
Front USB Media check ... OK
Checking...
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
•
Device Test: List of devices
USB Host
: USB media check (front). Only one time.
D/A Converter : DAC wtite check (non-verifi cation).
Ifcon
Ifcon
: Not used in this unit.
MIC
: Only karaoke model used.
MFI
: MFI read/write check.
IPC
: Not used in this unit.
External HDMI : Not used in this unit.
Transcorder
Transcorder
: Not used in this unit.
5. Diag (Video/Audio Test)
This screen performs video and audio tests.
This screen performs video and audio tests.
Screen 1: When video test category is selected
Operation:
[
Operation:
[
]
Shows/hides the color bar
[
M
]/[RETURN] Returns to the selection of test category
Screen 2: When audio test category is selected
Operation:
[
Operation:
[
]
Plays back/stops the tone sound
[
M
]/[RETURN] Returns to the selection of test category
• Video
test:
Outputs a color bar (composite & HDMI).
• Audio
test:
TONE sound output (speaker & HDMI).
Diag
Category: Video Test
HELP: [UP][ENT][RET]
Diag
Category: Audio Test
HELP: [UP] [ENT] [RET]
[ENT] Show Color Bar
[ENT] Generate TONE Sound
(Screen 1)
(Screen 2)
HBD-N590/N790W/N890W/N990W/N995W/T79
32
6. Diag (Audio Input Test)
Note: Not used for the servicing.
7. Diag (Wireless LAN Test)
Note: Not used for the servicing.
8. Diag (MIC Input Test)
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
Note: Not used for the servicing.
10. Diag (Transcoder Test)
Note: Not used for the servicing.
11. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[
Operation:
[1]/[
]
Moves to the Error Log output screen
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
(Displayed characters/values in the following fi gure are example)
Operation:
[
(Displayed characters/values in the following fi gure are example)
Operation:
[
<
]
Returns to the previous page
[
,
]
Moves to the next page
[RETURN] Returns to the screen (Screen 1) that selects the log
type
[RED]
Writes the log contents to an USB memory device
•
Viewing the log display
Error Log:
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[Index number] [Date] [Time] [Error code]
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note: Please do not press the [RED] button immediately after USB mem-
ory is inserted.
Please do not pull out USB memory immediately after the [RED]
button was pressed.
Error Log:
When
When
“getErrLogFile.trm
fi le” exists in the USB memory de-
vice, errlog.log fi le is output.
Select Log
HELP : [DOWN][ENT][(NUM)]
Error Log
02]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[182] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
<Page 1/20>
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[182] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
<Page 1/20>
HELP : Press [RED] key to store log to Udisc.
:
:
:
[1] Error Log
(Screen 1)
(Screen 2)
12. Log (HDD Log)
Note: Not used for the servicing.
13. Factory Initialize (Factory Settings)
There is a possibility that this mode cannot be correctly execut-
ed. Never use this mode.
ed. Never use this mode.
Click on the first or last page to see other HBD-N590 / HBD-N790W / HBD-N890W / HBD-N990W / HBD-N995W / HBD-T79 service manuals if exist.