Sony HBD-E190 / HBD-E290 / HBD-E490 / HBD-E690 Service Manual ▷ View online
HBD-E190/E290/E490/E690
21
BD SERVICE MODE
Note: The operation in this mode must use a remote commander and TV
monitor.
Setting method of the BD service mode:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press button in order of the [DISPLAY]
[0] [2] [1]
[SUBTITLE] on the remote commander. (Make the interval
when each button is pressed within two seconds)
when each button is pressed within two seconds)
4. Enter the BD service mode. The OSD menu on TV monitor
can be operated by remote commander.
1. Main Functions
• Diag
• Diag
Performs unit test of devices installed on the board.
• Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version
Up
Not
used.
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not
used.
• Drive
Write drive OP data and check drive.
6. The message “Close” appears, and press the [
] button on the
remote commander.
7. Select “Reset to Factory Default Settings”, and press the [
]
button on the remote commander.
8. Select “All Settings”, and press the [
] button on the remote
commander.
9. Select “Start”, and press the [
] button on the remote com-
mander.
10. Initialization ends when the message “WELCOME” on the
fl uorescent indicator tube disappears.
Initialize Personal Information
Close
Initialization complete.
Initialize Personal Information
Reset to Factory Default Settings
Restore each setting to the factory d
Restore each setting to the factory d
Reset to Factory Default Settings
BD/DVD Viewing Settings
Personal Control Settings
Music Settings
System Settings
Network Settings
All Settings
Personal Control Settings
Music Settings
System Settings
Network Settings
All Settings
All Settings
Restore all settings to the factory default
settings. The system will turn off after
reset.
settings. The system will turn off after
reset.
Start
Cancel
HBD-E190/E290/E490/E690
22
2. Menu Tree
Version Up
Not used
Not used
System Information
Displays system information
Displays system information
Factory Initialize
,QLWLDOL]HGHIDXOWVHWWLQJ
,QLWLDOL]HGHIDXOWVHWWLQJ
LoJ
Displays Error /RJ
Displays Error /RJ
Error LoJ
Displays error loJ
DiaJ
Network
1Htwork diDJQRVLVIRUZLUHG
1Htwork diDJQRVLVIRUZLUHG
PinJ
&RQILUPQHWZRUNFRQQHFWLRQ
,IFRQILJ
View network status
Device Test
86%'$&,)FRQWHVW
86%'$&,)FRQWHVW
Video Test
Video output test
Video output test
$udio Test
$udio output test
$udio output test
$udio Input Test
$XGLR,QSXW7HVW
$XGLR,QSXW7HVW
:LUHOHVV/$17HVW
Not used
Not used
(0&7HVW0RGH
Not used
Not used
Drive
Write drive OP data and check drive
Write drive OP data and check drive
Start Update
Not used
Start Initialize
,QLWLDOL]HGHIDXOWVHWWLQJIRUWKHXQLW
'LDJ7HVW
Mic Test
Not used
Not used
HDMI Input Test
Not used
Not used
Transcorder Test
Not used
Not used
Service Mode Menu
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Service Mode Menu
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] (0&7HVW0RGH
[8] Drive
[9] HDD Mode
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] (0&7HVW0RGH
[8] Drive
[9] HDD Mode
HDD Mode
Not used
Not used
HBD-E190/E290/E490/E690
23
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen
[2]
Moves to Log screen
[3]
Moves to Factory Initialize screen
[4]
Moves to Network screen
[5]
Moves to Version Up (DISC version update) screen (Not
used)
used)
[6]
Moves to System Information screen
[7]
Moves to EMC test mode screen (Not used)
[8]
Moves to Drive screen
[9]
Moves to HDD mode (Not used)
[
M
]/[
m
] Moves the cursor
[
]
Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
]
Selects the device to test
[
]
Executes the test
[
M]
Returns to selection of test category
[RETURN] Returns to selection of test category
•
List of test categories
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test (Not used)
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
Video Test
Audio Test
Audio Input Test
Wireless LAN Test (Not used)
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
•
Device Test: List of devices
USB Host
: USB media check (front). Only one time.
D/A Converter : DAC write check (non-verifi cation).
Ifcon
Ifcon
: Not used in this unit.
MIC
: Only Karaoke Model used
MFI
: MFI read/write Check
IPC
: Not used
External HDMI : Not used
Transcorder
Transcorder
: Not used
5. Diag (Video/Audio Test)
This screen performs video and audio tests.
This screen performs video and audio tests.
Screen 1: When video test category is selected
Operation:
[
Operation:
[
]
Shows/hides the color bar
[
M
]/[RETURN] Returns to the selection of test category
Screen 2: When audio test category is selected
Operation:
[
Operation:
[
]
Plays back/stops the tone sound
[
M
]/[RETURN] Returns to the selection of test category
• Video
test:
Outputs a color bar (composite & HDMI).
• Audio
test:
TONE sound output (speaker & HDMI).
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
HELP : [UP] [DOWN] [ENT] [NUM]
HELP (currently available keys, etc.) is displayed
[1] Diag
Diag
Category:
Diag
Category: Device Test
Device:
Front USB Media check ... OK
Checking...
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
Diag
Category: Video Test
HELP: [UP][ENT][RET]
Diag
Category: Audio Test
HELP: [UP] [ENT] [RET]
[ENT] Show Color Bar
[ENT] Generate TONE Sound
(Screen 1)
(Screen 2)
HBD-E190/E290/E490/E690
24
6. Diag (Audio Input Test)
This screen performs audio input test.
This screen performs audio input test.
Screen 1: Select Audio Input Test Category
Operation:
[
Operation:
[
<]/[,] Selects the category
[
m]/[ ]
Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device
After “Audio Input Test” selects in Screen 1, the device to test is
chosen.
Operation:
[
After “Audio Input Test” selects in Screen 1, the device to test is
chosen.
Operation:
[
M]/[m] Selects
Device
[
]
Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
•
Device Test
: Device List
Digital Input1
: CXD90008 is inputted from ARC
Digital Input2
: CXD90008 is inputted from Optical
Analog Input
: CXD90008 is inputted from AUDIO
• Audio
Input
Test
CXD90008 is inputted from DIR/analog and outputs LineOut
(8ch) L and R.
Check tone sound by speaker connected with LineOut (8ch) L and
R.
(Input; LPCM 48kHz 2ch)
(8ch) L and R.
Check tone sound by speaker connected with LineOut (8ch) L and
R.
(Input; LPCM 48kHz 2ch)
7. Diag (Wireless LAN Test)
This screen performs wireless LAN test.
This screen performs wireless LAN test.
Note: Not used for the servicing.
8. Diag (MIC Input Test)
This screen performs MIC input test.
This screen performs MIC input test.
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
This screen performs HDMI input test.
This screen performs HDMI input test.
Note: Not used for the servicing.
10. Diag (Transcoder Test)
Note: Not used for the servicing.
11. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[
Operation:
[1]/[
]
Moves to the Error Log output screen
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[
Operation:
[
<
]
Returns to the previous page
[
,
]
Moves to the next page
[RETURN] Returns to the screen (Screen 1) that selects the log
type
[RED]
Writes the log contents to an USB memory device
•
Viewing the log display
Error Log:
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[Index number] [Date] [Time] [Error code]
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note: Please do not press the [RED] button immediately after USB mem-
ory is inserted.
Please do not pull out USB memory immediately after the [RED]
button was pressed.
Error Log:
When
When
“getErrLogFile.trm
fi le” exists in the USB memory de-
vice, errlog.log fi le is output.
Diag
Category:
Diag
Category: Audio Input Test
Device:
Device:
[ENT] Start Input Sound
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
Audio Input Test
Digital Input 1
Digital Input 2
Analog Input
(Screen 1)
(Screen 2)
[ ]
Diag
Category: Audio Input Test
Device:
Device:
[ENT] Stop Input Sound
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
[ ]
Digital Input 1
Digital Input 2
Analog Input
Select Log
HELP : [DOWN][ENT][(NUM)]
Error Log
02]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[182] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
<Page 1/20>
HELP : Press [RED] key to store log to Udisc.
[1] Error Log
(Screen 1)
(Screen 2)
Click on the first or last page to see other HBD-E190 / HBD-E290 / HBD-E490 / HBD-E690 service manuals if exist.