Sony CMT-X5CD / CMT-X5CDB / CMT-X7CD / CMT-X7CDB Service Manual ▷ View online
CMT-X5CD/X5CDB/X7CD/X7CDB
5
NOTE OF REPLACING THE WiFi MODULE (CMT-X7CD/
X7CDB only)
When replacing the WiFi module (Ref. No. WIFI1), MAC address
and DEVICE_ID are changed. Print the page 7 and page 9, cut it,
and hand over it to the customer with the unit, when returning the
unit that the repair is completed to the customer.
X7CDB only)
When replacing the WiFi module (Ref. No. WIFI1), MAC address
and DEVICE_ID are changed. Print the page 7 and page 9, cut it,
and hand over it to the customer with the unit, when returning the
unit that the repair is completed to the customer.
PROCESSING OF REPLACING THE WiFi MODULE (CMT-
X7CD/X7CDB only)
When replacing the WiFi module (Ref. No. WIFI1), peel the ID
label stuck on the bottom side of the unit, and stick on the new ID
label (refer to the following fi gure) enclosed with the new WiFi
module (Ref. No. WIFI1)
X7CD/X7CDB only)
When replacing the WiFi module (Ref. No. WIFI1), peel the ID
label stuck on the bottom side of the unit, and stick on the new ID
label (refer to the following fi gure) enclosed with the new WiFi
module (Ref. No. WIFI1)
1 Peel the ID label.
Device ID: XXXXXXXXXXXX
MAC Address: XX-XX-XX-XX-XX-XX
2 Stick on the
new ID label.
– Bottom view –
DELETION METHOD OF USER REGISTRATION OF SEN
SERVICE
By checking Device ID, user registration of the internet video of
this unit can be compulsorily reset.
(Device ID is “the hexadecimal number of 12 fi gures”)
When this unit needs compulsive reset, check the Device ID and
consult with a service headquarters.
SERVICE
By checking Device ID, user registration of the internet video of
this unit can be compulsorily reset.
(Device ID is “the hexadecimal number of 12 fi gures”)
When this unit needs compulsive reset, check the Device ID and
consult with a service headquarters.
Procedure:
1. Check the ID label stuck on the bottom side of the unit.
2. Device ID indicated on the ID label is recorded on a memoran-
1. Check the ID label stuck on the bottom side of the unit.
2. Device ID indicated on the ID label is recorded on a memoran-
dum etc.
(Device ID is “the hexadecimal number of 12 fi gures”)
– Bottom view –
Device ID: XXXXXXXXXXXX
MAC Address: XX-XX-XX-XX-XX-XX
Device ID
CHECKING METHOD OF NETWORK CONNECTION (CMT-
X7CD/X7CDB only)
It is necessary to check the network connection, when replacing
the WiFi module (Ref. No. WIFI1) and WiFi antenna 2.4 GHz
SVX (Ref. No. ANT1). Check the connection of wireless and
wired LAN, according to the following method.
X7CD/X7CDB only)
It is necessary to check the network connection, when replacing
the WiFi module (Ref. No. WIFI1) and WiFi antenna 2.4 GHz
SVX (Ref. No. ANT1). Check the connection of wireless and
wired LAN, according to the following method.
1. Checking Method of Wireless LAN Connection
Necessary Equipment:
• Access point supporting WPS
• Access point supporting WPS
Procedure:
1. Check that network LAN cable is not connected to the unit.
2. Press the [
1. Check that network LAN cable is not connected to the unit.
2. Press the [
?/1
] button to turn the power on.
3. Touch the [FUNCTION] button to select the “NETWORK”
function.
4. Press the [MENU] button on the remote commander to the dis-
play the setting menu on the liquid crystal display.
5. Press the [
V]/[v] buttons on the remote commander to select
the “NETWORK”.
6. Press the [
] button on the remote commander.
(“WPS” lights up on the liquid crystal display)
7. Press the [
] button on the remote commander.
(“OK”
fl ashes on the liquid crystal display)
8. Press the [
] button on the remote commander.
(“WPS”
fl ashes on the liquid crystal display)
9. Press the [WPS] button on the access point.
10. When wireless LAN connection is started, “CONNECT”
10. When wireless LAN connection is started, “CONNECT”
fl ashes on the liquid crystal display.
11. When wireless LAN connection is completed, “COMPLETE”
appears for a moment on the liquid crystal display, then “ ”
appears on the liquid crystal display.
appears on the liquid crystal display.
12. Press the [
?/1
] button to turn the power off.
Note: Refer to the instruction manual about details of the setting method.
2. Checking method of wired LAN connection
Necessary Equipment:
• Router
• Network LAN cable
• Router
• Network LAN cable
Procedure:
1. Connect the unit to the router with the network LAN cable.
2. Press the [
1. Connect the unit to the router with the network LAN cable.
2. Press the [
?/1
] button to turn the power on.
3. Touch the [FUNCTION] button to select the “NETWORK”
function.
4. Check that “ ” appears on the liquid crystal display.
5. Press the [
5. Press the [
?/1
] button to turn the power off.
Note: Refer to the instruction manual about details of the setting method.
RELEASING THE DISC SLOT LOCK
The disc slot lock function for the antitheft of sample disc in the
shop is equipped.
It can release the lock function in the following procedure.
The disc slot lock function for the antitheft of sample disc in the
shop is equipped.
It can release the lock function in the following procedure.
Releasing Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Touch the [FUNCTION] button to select the “CD” function.
3. Touch and press two buttons of the [VOL –] and [
3. Touch and press two buttons of the [VOL –] and [
?/1
] simul-
taneously for fi ve seconds.
4. The message “UNLOCKED” is displayed on the liquid crystal
display and the disc slot is unlocked.
Note: When “LOCKED” is displayed, the disc slot lock is not released by
turning power on/off with the [?/1] button.
CMT-X5CD/X5CDB/X7CD/X7CDB
6
MODEL IDENTIFICATION
Distinguish by Part No. of model number label stuck on the bottom side of a main unit.
Distinguish by Part No. of model number label stuck on the bottom side of a main unit.
Note: The printed contents of following fi gure model number label may be different from the model number label of a main unit.
MODEL NUMBER LABEL
4-528-192-0
[](UC2)
CMT-X5CD: US and Canadian models
4-528-187-0
[](RU1)
CMT-X5CD: Russin model
CMT-X5CD: Korean model
4-528-195-0
[](CEL)
CMT-X5CDB: AEP and UK models
4-528-197-0
[](AU1)
CMT-X5CDB: Australian model
4-528-177-0
[](CEL)
CMT-X7CD: AEP model
4-528-189-0
[](SP1)
CMT-X5CD: Singapore model
4-528-181-0
[](CN4)
CMT-X7CD: Chinese model
4-528-183-0
[](CEL)
4-528-188-0
[](KR2)
4-528-185-0
[](CEL)
CMT-X7CDB: AEP and UK models
CMT-X5CD: AEP model
– Bottom view –
Ver. 1.2
CMT-X5CD/X5CDB/X7CD/X7CDB
7
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address fi ltering function
of access point device of connection destination.
Please refer to the Operating Instructions “Preparing: setting up for a
network” for the confi rm method of MAC address.
• Please cut out along the dotted line and use it.
CMT-X5CD/X5CDB/X7CD/X7CDB
8
MEMO
Click on the first or last page to see other CMT-X5CD / CMT-X5CDB / CMT-X7CD / CMT-X7CDB service manuals if exist.