Sony CMT-X5CD / CMT-X5CDB / CMT-X7CD / CMT-X7CDB Service Manual ▷ View online
CMT-X5CD/X5CDB/X7CD/X7CDB
37
2-27. LOUDSPEAKER (65 mm) (FULL-RANGE SPEAKER) (SP1)
2-28. LOUDSPEAKER (65 mm) (FULL-RANGE SPEAKER) (SP2)
loudspeaker (65 mm)
(full-range speaker: L-ch)
(SP1)
(full-range speaker: L-ch)
(SP1)
+RZWRLQVWDOOWKHZLUH
white (-)
red (+)
3 loudspeaker (65 mm)
(full-range speaker: L-ch)
(SP1)
terminal
wire
terminal
wire
OK
OK
NG
NG
1 Remove the solder.
[red]
[red]
(+)
1 Remove the solder.
[white]
[white]
(-)
Note 1: Being sure not to let the wire conductor
section come in contact with any metal
part of the loudspeaker, install the wire
to the speaker terminal.
Note 2: To install the wire to the speaker
terminal, wrap only the conductor
section of the wire around the
speaker terminal and solder it in
place.
2 wire
white (-)
red (+)
1 Remove the solder.
[white]
[white]
(-)
1 Remove the solder.
[red]
[red]
(+)
terminal
wire
terminal
wire
OK
OK
NG
NG
loudspeaker (65 mm)
(full-range speaker: R-ch)
(SP2)
(full-range speaker: R-ch)
(SP2)
3 loudspeaker (65 mm)
(full-range speaker: R-ch)
(SP2)
2 wire
+RZWRLQVWDOOWKHZLUH
Note 1: Being sure not to let the wire conductor
section come in contact with any metal
part of the loudspeaker, install the wire
to the speaker terminal.
Note 2: To install the wire to the speaker
terminal, wrap only the conductor
section of the wire around the
speaker terminal and solder it in
place.
CMT-X5CD/X5CDB/X7CD/X7CDB
38
SECTION 3
TEST MODE
1. TEST MODE BY THE MAIN UNIT OPERATION
It operate the test mode by the main unit.
It operate the test mode by the main unit.
1-1. Cold Reset
It can clears all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
It can clears all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Touch and press two buttons of the [FUNCTION] and [
?
/
1
]
simultaneously for three seconds.
3. The message “RESET” (CMT-X5CD/X5CDB) or “ALLRESET”
(CMT-X7CD/X7CDB) is displayed on the liquid crystal dis-
play, then becomes the standby state.
play, then becomes the standby state.
Screen display (CMT-X5CD/X5CDB)
Screen display (CMT-X7CD/X7CDB)
1-2. Disc Slot Lock Mode
It can be unable to take sample disc out of disc slot in the shop.
It can be unable to take sample disc out of disc slot in the shop.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Touch the [FUNCTION] button to select the “CD” function.
3. Insert a disc in the unit.
4. Touch and press two buttons of the [VOL –] and [
3. Insert a disc in the unit.
4. Touch and press two buttons of the [VOL –] and [
?/1
] simul-
taneously for fi ve seconds.
5. The message “LOCKED” is displayed on the liquid crystal
display and the disc slot is locked.
(Even if pressing the [
Z
] button, the message “LOCKED”
is displayed on the liquid crystal display and the disc slot is
locked)
locked)
Screen display
Releasing method:
1. Touch and press two buttons of the [VOL –] and [
1. Touch and press two buttons of the [VOL –] and [
?/1
] simul-
taneously for fi ve seconds
2. The message “UNLOCKED” is displayed on the liquid crystal
display and the disc slot is unlocked.
Screen display
1-3. Check Version Display
It can confi rm the MC, CD and NW version.
It can confi rm the MC, CD and NW version.
Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Touch and press two buttons of the [TUNING +
>
] and
[
?/1
] simultaneously for three seconds.
3. It enters the check version display mode, the MC version is
displayed on the liquid crystal display.
Screen display
(CMT-X5CD/X5CDB: 1.04, CMT-X7CD/X7CDB: 1.05)
(CMT-X5CD/X5CDB: 1.04, CMT-X7CD/X7CDB: 1.05)
(Displayed values in the above fi gure are example)
4. Each time [TUNING +
>
] button is touched, the display
changes CD version and NW version (CMT-X7CD/X7CDB
only) this order, and release from check version display mode.
only) this order, and release from check version display mode.
MC version
CD version
NW version
(CMT-X7CD/X7CDB only)
(CMT-X7CD/X7CDB only)
Check version display mode releasing
(Displayed values in the above fi gure are example)
1-4. RF Mode
It can turn on and off the wireless signal of WiFi (CMT-X7CD/
X7CDB only) and Bluetooth.
It can turn on and off the wireless signal of WiFi (CMT-X7CD/
X7CDB only) and Bluetooth.
Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Check that “ ” fl ashes on the liquid crystal display.
3. Touch and press two buttons of the [TUNING ─
3. Touch and press two buttons of the [TUNING ─
.
] and
[
?/1
] simultaneously for three seconds.
4. The message “RF ON” or “RF OFF” is displayed on the liquid
crystal display, it turn on or off the wireless signal of WiFi
(CMT-X7CD/X7CDB only) and Bluetooth.
(CMT-X7CD/X7CDB only) and Bluetooth.
Screen display
or
CMT-X5CD/X5CDB/X7CD/X7CDB
39
2. TEST MODE BY THE MAIN UNIT AND REMOTE
COMMANDER OPERATION
It operate the test mode by the main unit and following remote
commander.
commander.
Note: A button having no particular description in the text, indicates the
main unit button.
Part No.
Description
1-489-989-11
REMOTE COMMANDER (RM-AMU139)
2-1. Reset
It can clears all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
It can clears all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
Note: It is the same specifi cation as 1-1. Cold Reset on page 38.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press the buttons on the remote commander in order of the
[ALPHABET SEARCH] → [1] → [ENTER].
(Press the next button within three seconds)
3. The message “RESET” (CMT-X5CD/X5CDB) or “ALLRESET”
(CMT-X7CD/X7CDB) is displayed on the liquid crystal dis-
play, then becomes the standby state.
play, then becomes the standby state.
Screen display (CMT-X5CD/X5CDB)
Screen display (CMT-X7CD/X7CDB)
2-2. Common Test
It can confi rm the sound function.
It can confi rm the sound function.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press the buttons on the remote commander in order of the
[ALPHABET SEARCH] → [2] → [ENTER].
(Press the next button within three seconds)
3. It enters the common test mode, the message “AUDIO IN” is
displayed on the liquid crystal display.
(In this mode, “cPLAY” and “SLEEP” continues blinking on
the liquid crystal display)
the liquid crystal display)
Screen display
c
PLAY
SLEEP
Blinking
4. When pressing the [VOL +]/[VOL −] button, the message is
changed with “VOL MIN” ↔ “VOL 1” ↔ “VOL 18” ↔
“VOL MAX” on the liquid crystal display and volume setting
is changed.
“VOL MAX” on the liquid crystal display and volume setting
is changed.
Screen display
c
PLAY
SLEEP
c
PLAY
SLEEP
c
PLAY
SLEEP
c
PLAY
SLEEP
5. Each time [TUNING +
>
] button is touched, the display
changes “VB ON” → “VB OFF” → “VB AUTO” → “VB
ON” this order, and virtual bass setting is changed.
ON” this order, and virtual bass setting is changed.
Screen display
c
PLAY
SLEEP
c
PLAY
SLEEP
c
PLAY
SLEEP
6. Each time [TUNING ─
.
] button is touched, the display
changes “DSEEON” → “DSEEOFF” → “DSEEAUTO” →
“DSEEON” this order, and DSEE setting is changed.
“DSEEON” this order, and DSEE setting is changed.
Screen display
c
PLAY
SLEEP
c
PLAY
SLEEP
c
PLAY
SLEEP
Releasing method:
Press the [
Press the [
?
/
1
] button to reset the main unit and turn the power off.
CMT-X5CD/X5CDB/X7CD/X7CDB
40
2-3. Panel Test
It can confi rm the liquid crystal display, LEDs, model name, desti-
nation, software version and buttons.
It can confi rm the liquid crystal display, LEDs, model name, desti-
nation, software version and buttons.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press the buttons on the remote commander in order of the
[ALPHABET SEARCH] → [1] → [9] → [ENTER].
(Press the next button within three seconds)
3. It enters the panel test mode, and all segments on the liquid
crystal display and all LEDs light up.
Screen display
c
PLAY
c
REC UPDATE
FLDR SHUF PGM
1
SLEEP
ST NX
REC
4. When touching the [TUNING +
>
] button, the model name
and destination are displayed on the liquid crystal display al-
ternately.
ternately.
(In this mode, “ ”continues lighting up and “ST” continues
blinking on the liquid crystal display)
blinking on the liquid crystal display)
Screen display
ST
ST
Blinking
Model Name
Display
CMT-X5CD
CMT-X5CD
CMT-X5CDB
CMTX5CDB
CMT-X7CD
CMT-X7CD
CMT-X7CDB
CMTX7CDB
Destination
Display
US and Canadian
NA
AEP and UK
CE2
Australian
AU
Chinese
CN
Russian
RU
Singapore
ASIA2
Korean
KR
5. When touching the [TUNING +
>
] button again, the MC
version is displayed on the liquid crystal display.
6. Each time [TUNING +
>
] button is touched, the display
changes MCS version → PF version → MTK version → OPU
version → NWM version (CMT-X7CD/X7CDB only) →
BTM version → GC version → USBL version → USBM ver-
sion → NWA version (CMT-X7CD/X7CDB only) → NWD
version (CMT-X7CD/X7CDB only) → BTA version → CD
version → CDMA version → CDMB version → ST version
→ TA version → TM version this order, and returns to the MC
version display.
version → NWM version (CMT-X7CD/X7CDB only) →
BTM version → GC version → USBL version → USBM ver-
sion → NWA version (CMT-X7CD/X7CDB only) → NWD
version (CMT-X7CD/X7CDB only) → BTA version → CD
version → CDMA version → CDMB version → ST version
→ TA version → TM version this order, and returns to the MC
version display.
Note: As for MCS version and OPU version, right version is not displayed
on the liquid crystal display. Don’t refer to the value.
MC version
(CMT-X5CD/X5CDB: 1.04,
CMT-X7CD/X7CDB: 1.05)
(CMT-X5CD/X5CDB: 1.04,
CMT-X7CD/X7CDB: 1.05)
MCS version
(Right version is not displayed)
(Right version is not displayed)
PF version
MTK version
OPU version
(Right version is not displayed)
(Right version is not displayed)
NWM version
(CMT-X7CD/X7CDB only)
(CMT-X7CD/X7CDB only)
BTM version
GC version
USBL version
NWA version
(CMT-X7CD/X7CDB only)
(CMT-X7CD/X7CDB only)
NWD version
(CMT-X7CD/X7CDB only)
(CMT-X7CD/X7CDB only)
BTA version
CD version
CDMA version
CDMB version
ST version
TA version
TM version
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
USBM version
ST
(Displayed values in the above fi gure are example)
7. When pressing the [
x
] button on the remote commander while
the each version is displayed, year, month and day of the soft-
ware creation is displayed. When pressing the [
ware creation is displayed. When pressing the [
x
] button on
the remote commander again, the display returns to the each
version display.
version display.
Screen display
ST
ST
(Displayed values in the above fi gure are example)
8. When touching the [TUNING ─
.
] button, “K 0” is dis-
played on the liquid crystal display.
Screen display
ST
9. Each time a button is pressed and touched, “K 0” value in-
creases. However, once a button is pressed and touched, it is
no longer taken into account.
no longer taken into account.
When pressing and touching the all buttons, display becomes
“K8”.
“K8”.
Screen display
ST
Releasing method:
Press the buttons on the remote commander in order of the [AL-
PHABET SEARCH] → [1] → [9] → [ENTER].
(Press the next button within three seconds)
Press the buttons on the remote commander in order of the [AL-
PHABET SEARCH] → [1] → [9] → [ENTER].
(Press the next button within three seconds)
Ver. 1.2
Click on the first or last page to see other CMT-X5CD / CMT-X5CDB / CMT-X7CD / CMT-X7CDB service manuals if exist.