DOWNLOAD Sony CMT-C5 / HCD-C5 Service Manual ↓ Size: 13.37 MB | Pages: 97 in PDF or view online for FREE

Model
CMT-C5 HCD-C5
Pages
97
Size
13.37 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cmt-c5-hcd-c5.pdf
Date
PREV: Sony DAV-C700 / DAV-S500 / SS-RS500 / SS-TS500 Service Manual

Sony CMT-C5 / HCD-C5 Service Manual ▷ View online

13
HCD-C5
3-5. FRONT BRACKET SECTION, LOADING MOTOR ASSY (M902)
1
 FPC holder
B
2
 screw
    (M 2 x 2.5)
4
 screw
     (+P 2 x 3.0)
1
 wire clamper
3
 Move down the gear mount 
    bracket in the direction of the
    arrow 
B
.
6
 screw
    (+P 2 x 3)
7
 screw
    (M 2 x 4)
A
8
 Remove it in the direction of
    the arrow 
A
 from the left side
    when viewed from the rear of
    the front bracket. 
5
 Remove the two 
    hang-up springs (FZ).
3
 three claws
2
 loading belt
4
 Raise the
    CONNECTOR board.
Note during re-assembling
When re-assembling, align the positions as shown.
1
 front backet section
2
 Remove two solderings.
3
 loading motor assy (M902)
14
HCD-C5
3-6. SW BOARD
1
 eleven claws
3
2
 Release it from
    the detents.
1
 Remove two solderings.
5
 Remove two solderings.
9
 Remove five solderings.
3
 Remove two solderings.
7
 Remove two solderings.
2
 switch (S3)
    (Disc Existence, Chucking, Releasing detect)
q;
 SW board
(BRN)
(RED)
4
 switch (S2)
    (12cm Disc/12cm 
    Disc Eject End detect)
6
 switch (S1)
    (Disc IN/8cm Disc detect)
8
 switch (S4)
    (8cm Disc Eject End detect)
(ORG)
(YEL)
(GRN)
15
HCD-C5
3-8. REAR DAMPER BRACKET
3-7. FEED MOTOR ASSY (M903)
2
 Remove the
    soldering.
4
 pulley gear
3
1
 two screws
    (+P 2 x 10)
5
 screw
    (+P 2 x 3.0)
6
 FD gear bracket
7
 feed motor assy
    (M903)
2
 screw
    (+P 2 x 2.5)
4
 screw
    (+P 2 x 3)
3
 two screws
    (+P 2 x 3)
1
 wire clamper
5
 rear damper bracket
16
HCD-C5
3-9. OPTICAL PICK-UP (OPTIMA-720L1E), SCREW GUIDE, FEED SCREW ASSY, etc.
3-10. OPTICAL PICK-UP (OPTIMA-720L1E)
2
 two screws
    (+P 2  x 10)
4
 screw
    (+P 2  x 10)
3
 feed motor assy (M903),
     FD gear bracket, etc.
A
5
 Slant the CONNECTOR board 
    in the direction of the arrow 
A
. 
1
 pick-up flexible board
6
 optical pick-up (OPTIMA-720L1E), 
    screw guide,
    feed screw assy, etc.
2
 screw
    (+P 1.7 x 6)
6
 screw
    (+P 1.4 x 2)
7
 pulley guide spring
3
 detent spring
4
 pulley M
8
 optical pick-up
    (OPTIMA-720L1E)
5
 feed screw assy
1
 screw guide
Page of 97
Display

Click on the first or last page to see other CMT-C5 / HCD-C5 service manuals if exist.

RANDOM: