DOWNLOAD Sony BDV-E780W / BDV-E980W / BDV-E985W / HBD-E780W / HBD-E980W / HBD-E985W Service Manual ↓ Size: 6.08 MB | Pages: 105 in PDF or view online for FREE

COLD  RESET
The cold reset clears data except BD/DVD data stored in the RAM 
to initial conditions. Execute this mode when returning the unit to 
the customers.
Procedure:
1.  Press the [

?/1

] button to turn the power on.

2.  Touch the [

x

] and [VOL –] sensors simultaneously and hold 

down (around 5 seconds).

3.  The message “RESET” appears on fl uorescent indicator tube, 

then becomes standby states.

DEMO  MODE
This mode let you lock the disc tray. When this mode is activated, 
the disc will not eject when the [

Z

] sensor is touched. The mes-

sage “DEMO LOCK” will be displayed on the fluorescent indica-
tor tube.
Procedure:
1.  Press the [

?/1

] button to turn the power on. 

2.  Touch the [FUNCTION] sensor to select the “BD/DVD”.
3.  Touch the [

x

] and [

Z

] sensors simultaneously and hold down 

until “DEMO LOCK” or “DEMO OFF” displayed on the fluo-
rescent indicator tube (around 5 seconds).

Releasing method:
Touch the [

x

] and [

Z

] sensors simultaneously and hold down until 

“DEMO OFF” displayed on the fl uorescent indicator tube (around 
5 seconds).

PANEL TEST
Procedure:
1.  Press the [

?/1

] button to turn the power on.

2.  Press button in order of the [DISPLAY] 

[0] [0] [1] 

[SUBTITLE] on the remote commander (Make the interval 
when each button is pressed within two seconds).

3. All 

segments 

in 

fl uorescent indicator tube are lighted up. And 

half segments in fl uorescent indicator tube are lighted up, oth-
ers half segments in fl uorescent indicator tube are lighted up, 
then all segments in fl uorescent indicator tube are lighted up. 
This operation is repeated.

4.  When all segments in fl uorescent indicator tube are lighted up 

in the state of step 3, press the [VOL +] button on the remote 
commander and model information is displayed on the fl uores-
cent indicator tube.

 

Each time the [VOL +] button on the remote commander is 
pressed, the display changes from destination information, 
STR version in this order, and returns to the model informa-
tion display.

 

Each time the [VOL –] button on the remote commander is 
pressed, the version and date are switched.

5.  In the state of step 3, press the [FUNCTION] button on the 

remote commander and “K 0” is displayed on the fluorescent 
indicator tube.

 

“K 0” value increases whenever a button or sensor on the unit 
is pressed. However, once a button or sensor has been pressed, 
it is no longed taken into account.

 

All button and sensors on the unit are pressed, “OK” and “K 7” 
are alternately displayed on the fluorescent indicator tube.

Releasing method:
To release from this mode, press the [

?/1

] button.

FACTORY  INITIALIZE
Return all of the unit setting to their factory defaults.

Note 1: Disconnect the following connections when you use this mode.
 

   

 Front USB

 

   

 Rear USB

 

   

 LAN

 

   

 HDMI IN 1

 

   

 HDMI IN 2

Note 2: The operation in this mode must use a remote commander and TV 

monitor.

Procedure:
1.  Press the [

?/1

] button to turn the power on. 

2.  Press the [HOME] button on the remote commander, and the 

home menu is displayed.

3. Select 

“Setup” 

 “Resetting”, and press the [ ] button on the 

remote commander.

Resetting

Easy Setup

4.  Select “Initialize Personal Information”, and press the [

] 

button on the remote commander.

Initialize Personal Information
Erase personal data when disposing

Reset to Factory Default Settings

5.  Select “OK”, and press the [

] button on the remote com-

mander.

Initialize Personal Information

OK

Cancel

The information below will be deleted.
Do you want to proceed?
  Playback history
  Internet video utilization information
  Internet content registered as Favorites

[Wireless checking fail on M07.R.179]
Due to software bug in M07.R.179, currently Service mode do not sup-
port wireless checking features this version of software.
For service to confi rm the wireless checking, please update customer 
sets to latest version of software. By using network upgrade method 
or Disc upgrade method. After fi nish upgraded, Service member can 
perform wireless checking as mention in wireless LAN checking pages.

Or

Confi rm wireless LAN connection from customer mode, in case of 
Wireless connection successfully establish. The wireless Lan network 
connection will be judge as OK.

Date: 26 January 2011

Note: The operation in this mode must use a remote commander and TV 

monitor.

Setting method of the BD service mode:
1.  Connect this unit with TV monitor.
2.  Press the [

?/1

] button to turn the power on.

3.  Press button in order of the [DISPLAY] 

[0] [2] [1] 

[SUBTITLE] on the remote commander. (Make the interval 
when each button is pressed within two seconds)

4.  Enter the BD service mode. The OSD menu on TV monitor 

can be operated by remote commander.

• Diag
 

Performs unit test of devices installed on the board.

• 

Display Error Log

 

Error log is displayed. Displayed contents can also be saved in 
an USB memory device.

• Factory 

Initialize

 

Restores the unit to its factory settings.

• Network
 

Checks the wired network connection.

• Version 

Up

 Not 

used.

• System 

Information

 

Displays the system information of the unit.

 

Displays information such as the software version, drive infor-
mation, etc.

• EMC 

Test 

Mode

 Not 

used.

• Drive
 

Write drive OP data and check drive.

6.  The message “Close” appears, and press the [

] button on the 

remote commander.

Initialize Personal Information

Close

Initialization complete.

7.  Select “Reset to Factory Default Settings”, and press the [

] 

button on the remote commander.

Initialize Personal Information

Reset to Factory Default Settings
Restore each setting to the factory d

8.  Select “All Settings”, and press the [

] button on the remote 

commander.

Reset to Factory Default Settings

BD/DVD Viewing Settings
Personal Control Settings
Music Settings
System Settings
Network Settings
All Settings

9.  Select “Start”, and press the [

] button on the remote com-

mander.

All Settings

Restore all settings to the factory default
settings. The system will turn off after
reset.

Start

Cancel

10. Initialization ends when the message “WELCOME” on the 

fl uorescent indicator tube disappears.

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD Mode

Version Up
‡ Not used

System Information
‡ Displays system information

Factory Initialize
‡ Initialize default setting

Log
Displays Error Log

Error Log

‡ Displays error log

Diag

Network
‡ Network diagnosis for wired

Ping

‡ Confirm network connection

Ifconfig

‡ View network status

Device Test
‡ US%D$CIFcon test

Video Test
‡ Video output test

$udio Test
‡ $udio output test

$udio Input Test
‡ $udio Input Test

:ireless L$N Test
‡ Not used

EMC Test Mode
‡ Not used

Drive
‡ Write drive OP data and check drive

HDD Mode
‡ Not used

Start Update for %DV

‡ Not used

Start Update for %DP

‡ Not used

Start Initialize

‡ Initialize default setting for the unit

‡ Diag Test

Transcoder Test
‡ Not used

HDMI Input Test
‡ HDMI Input Test

Mic Test
‡ Not used

3.  Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1] 

Moves to Diag screen

[2] 

Moves to Log screen

[3] 

Moves to Factory Initialize screen

[4] 

Moves to Network screen

[5] 

Moves to Version Up (DISC version update) screen (Not 
used)

[6] 

Moves to System Information screen

[7] 

Moves to EMC test mode screen (Not used)

[8] 

Moves to Drive screen

[9] 

Moves to HDD mode (Not used)

[

M

]/[

m

]  Moves the cursor

[

] 

Moves to the screen of the item selected with the cursor

*  Cursor is not displayed when the menu is fi rst displayed.

 

Service Mode Menu

4.  Diag (Device Test)
This screen is used to test devices mounted on the board.

Screen 1: Selects the test category
Operation:
[

<

]/[

,

] 

Selects the category

[

m

]/[

] 

Moves to the selected category

[RETURN]  Returns to the service top menu

Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[

<

]/[

,

] 

Selects the device to test

[

] 

Executes the test

[

M] 

Returns to selection of test category

[RETURN]  Returns to selection of test category

• 

List of test categories

Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test (not used)
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)

 Diag

 Diag

• 

Device Test: List of devices

USB Host 

: USB media check (front and rear). Only one time.

D/A Converter  : DAC write check (non-verifi cation).
Ifcon 

: Not used in this unit.

MIC 

: Not used in this unit.

MFI 

: MFI read/write Check

IPC 

: Device ID check

External HDMI : Revision check
Transcorder 

: Not used

5.  Diag (Video/Audio Test)
This screen performs video and audio tests.

Screen 1: When video test category is selected
Operation:
[

] 

Shows/hides the color bar

[

M

]/[RETURN]  Returns to the selection of test category

Screen 2: When audio test category is selected
Operation:
[

] 

Plays back/stops the tone sound

[

M

]/[RETURN]  Returns to the selection of test category

• Video 

test:

Outputs a color bar (composite & component & HDMI).

• Audio 

test:

TONE sound output (speaker & HDMI).

 Diag

 Diag