DOWNLOAD Sony BDV-E500W / HCD-E500W Service Manual ↓ Size: 6.33 MB | Pages: 126 in PDF or view online for FREE

3-3.  Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1] 

Moves to Diag screen

[2] 

Moves to Log (Error Log/Command Log display) screen

[3] 

Moves to Factory Initialize (factory settings) screen

[4] 

Moves to Network screen

[5] 

Moves to Version Up (DISC version update) screen

[6] 

Moves to System Information (system information display) 
screen

[

M

]/[

m

]  Moves the cursor

[

3

] 

Moves to the screen of the item selected with the cursor

* Cursor is not displayed when the menu is fi rst displayed.

 

Service Mode Menu

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information

Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information

Version Up
‡ Version update using DISC

System Information
‡ Displays system information

Factory Initialize
‡ 5estores set to factory settings

Log
Displays Error Log/Command Log

Error Log

‡ Displays error log

Command Log

‡ Displays command log

Diag

Network
‡ Network diagnosis

Ping

‡ 

Checks communication status of network

Status

‡ Checks network settings

Device Test
‡ Unit test of board devices

Video Path Test
‡ Video output test

Audio Path Test
‡ Audio output test

‡ Diag (self-diagnosis tool)

3-5.  Diag (Video/Audio Test)
This screen performs video and audio tests.

Screen 1: When video test category is selected
Operation:
[

3

] 

Shows/hides the color bar

[

M

]/[RETURN]  Returns to the selection of test category

Screen 2: When audio test category is selected
Operation:
[

3

] 

Plays back/stops the tone sound

[

M

]/[RETURN]  Returns to the selection of test category

• Video test:
Outputs a color to HDMI only.
(In the case of HDMI, the device must be connected when launch-
ing the function)

• Audio test:
Not used for the servicing.

 Diag

 Diag

3-6.  Log: Command Log/Error Log (Output of each Log)
This screen displays the contents of each log.

Note: Do not refer to the displayed date.

Screen 1: Selects the type of log to display
Operation:
[1] 

Moves to the Error Log output screen

[2] 

Moves to the Command Log output screen

[

M

]/[

m

] 

Moves the cursor

[

3

] 

Moves to the item selected with the cursor

[RETURN]  Returns to the top menu of the service mode

3-4.  Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is also used to perform video and audio tests.

Screen 1: Selects the test category
Operation:
[

<

]/[

,

]  Selects the category

[

m

]/[

3

]  Moves to the selected category

Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[

<

]/[

,

]  Selects the device to test

[

3

] 

Executes the test

[

M

] 

Returns to selection of test category

 

Selects the cursor during IFCon and D terminal tests

[

m

] 

Selects the cursor during IFCon and D terminal tests

•  List of test categories
Device Test
Video Test
Audio Test

•  Device Test: List of devices
USB Host (*1)
D/A Converter (*2)
D terminal (*3)
Ifcon (*4)

*1)  Output of various logs can be performed for the fi rst USB host 

check only. Logs cannot be

 

output for following checks.

*2)  8 [ch] D/A Converter test is not available.
*3) Not available.
*4) Not available.
*For details concerning device test, see the Diag reference.

 Diag

 Diag

Screen 2: Displays the Error Log
Operation:
[

<

] 

Returns to the previous page

[

,

] 

Moves to the next page

[RETURN] Returns to the screen (screen 1) that selects the log 

type

[RED] 

Writes the log contents to an USB memory device

Screen 3: Displays the Command Log
Operation:
[

<

] 

Returns to the previous page

[

,

] 

Moves to the next page

[RETURN] Returns to the screen (screen 1) that selects the log 

type

[RED] 

Writes the log contents to an USB memory device

•  Viewing the log display
Error Log:
 

001 08/01/01 00: 53: 19: [ErrCode: 080400000000]

 

[Number (starting from old log) ] [date] [time] [error 
code]

Command Log:
 

0001 08/01/01 00: 53: 19: 0 POWER 0

 

[Number (starting from old log) ] [date] [time] [count] 
[command name]

 

[Edge 0: on 1: off]

About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB 
memory device inserted into the set

Error Log:
 When 

getErrLogFile.trm 

fi le exists in the USB memory 

device, errlog.log fi le is output.

Command Log:
 When 

getCmdLogFile.trm 

fi le exists in the USB memory 

device, cmdlog.log fi le is output.

*  This function cannot be used when performing USB Host test 

in the Diag screen.

 

Writing to an USB memory devices takes a few seconds. Wait 
suffi ciently before removing device.

 Select Log

 Error Log

 Command Log

3-7.  Factory Initialize (Factory Setiings)
This screen returns the set to the factory settings.
All changes settings will be restored to the factory settings, and all 
saved titles will be deleted. Note that executing this function does 
not complete the initialization process.
The initialization process is completed by rebooting the set after 
operation is performed.
Normal rebooting is required for the initialization to take effect. 
Initialization is not complete when rebooting in special modes 
such as the service mode.

Operation:
Screen 1
Press the [

3

] button in this screen when restoring the set to its 

factory settings.
All saved titles will also be deleted.
[

3

] 

Initialize the set to its factory settings

[RETURN]  Return to the top menu of the service mode

Screen 2
This is the screen that is displayed after performing initialization.
The initialization process is completed by rebooting the set.
Remove the AC power cord and insert the AC power cord again.
*Operations in other service menus can also be performed.

 Factory Initialize

 Factory Initialize

3-8.  Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu
Each network diagnosis function is accessed from this screen.
[RETURN]  Returns to the top menu of the service mode

Note: Not used for the servicing.

3-9.  Network (Network Test Diagnosis Screen: Ping)
Ping test.

Note: Not used for the servicing.

3-10.  Version Up (Version Update using DISC)
This screen performs version updates using DISC.

Screen 1: Screen when entering the Version Up menu
Operation:
[

3

] 

Starts update using DISC 

→ (opens tray and displays 

screen 2)

[RETURN]  Returns to the top menu of the service mode

Screen 2: Insert version update DISC
Operation:
[

3

] 

Closes the tray and checks the DISC

[RETURN] Cancels operation (closes the tray and returns to 

screen 1)

→ OK

Operation: Automatically reboots the set

→ NG

Operation: Outputs [Error] (content of error) and returns to screen 2

 Version Updater

 Version Updater

 Version Updater

 Version Updater

3-11.  System Information (System Information Display)
This screen displays system information.

Operation:
[

3

] Measures 

ΔIOP of the drive (takes a few seconds: 1 

time only)

[RETURN]  Returns to the top menu of the service mode

*When measuring ΔIOP,

Version Up function in the Service Mode menu will no longer be 
available.

Displayed contents:
Model name 

: Model

Destination : 

Dest

IP address 

: IP

Mac address 

: Mac

CPU version 

: CPU 

← [FirmVersion] [GenerationVersion]

NBL version 

: NBL

Kernel version  : Kernel
Host version 

: Host 

← [HostVersion] [ReleaseVersion]

Optical disc drive : Drive 

← [Model] [FirmRevision] [SerialNum

ber]

Drive usage time  : LDTime 

← [Media]: [LDTime]/[ΔIOP]/ΔIOP/

ΔIOP

ΔIOP temperature
measurement : 

dIOP_TEMP

IFCon version *Not available.
 : 

IFCon 

← B0: [Block0 version] B1: [Block1 

version]

IFCon Firm date *Not available.
 : 

FirmDate

Set temperature *Not available.
 : 

Temp 

← [ºC]

∗ System Information