Sony BDV-E500W / HCD-E500W Service Manual ▷ View online
HCD-E500W
5
MODEL IDENTIFICATION
– Rear Chassis –
– Rear Chassis –
Part No.
Model
Part No.
US model
4-122-981-0[]
PX model
4-122-981-1[]
Canadian model
4-148-951-1[]
1 Remove the case.
(Illustration of disassembly is omitted.)
3
tray
2
clip etc.
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Ver. 1.1
HCD-E500W
6
lead wire
heat sink
MB-124 BOARD SERVICE POSITION
LEAD WIRE MUST NOT COME IN CONTACT WITH THE HEAT SINK
MB-124 board
HCD-E500W
7
MAIN board
Connect jig (extension cable J-2501-199-A)
to the MAIN board (CN501)
to the MAIN board (CN501)
800
:/2 W
800
:/2 W
– POWER Board (Conductor Side) –
C903
C934
MAIN BOARD SERVICE POSITION
In checking the MAIN board, prepare jig (extension cable J-2501-199-A: 1 mm Pitch, 25 cores, Length 300 mm).
In checking the MAIN board, prepare jig (extension cable J-2501-199-A: 1 mm Pitch, 25 cores, Length 300 mm).
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C903 and C934) to
discharge the capacitors (C903 and C934).
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C903 and C934) to
discharge the capacitors (C903 and C934).
HCD-E500W
8
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
SET
2-3. FRONT
PANEL
ASSY
(Page
9)
2-4. BD DRIVE (BPD-200)
(Page
(Page
10)
2-2. CASE
(Page
(Page
9)
2-5. VIDEO
BOARD
(Page
11)
2-6. MB-124
BOARD
(Page
11)
2-8. MAIN
BOARD
(Page
12)
2-7. DSP
BOARD
(Page
12)
2-9. INCLUDE
BOARD
(Page
13)
2-10. POWER BOARD
(Page
(Page
13)
Click on the first or last page to see other BDV-E500W / HCD-E500W service manuals if exist.