Sharp LC-80LE657EN (serv.man5) User Manual / Operation Manual ▷ View online
27
Introduction to connections
The TV is equipped with the terminals as shown
below. Find the cable corresponding the TV’s
terminal and connect the device.
below. Find the cable corresponding the TV’s
terminal and connect the device.
E
Before connecting ...
• Be sure to turn off the TV and any devices before
making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external
• Carefully read the operation manual of each external
device for possible connection types. This also helps
you get the best possible audiovisual quality to
maximise the potential of the TV and the connected
device.
you get the best possible audiovisual quality to
maximise the potential of the TV and the connected
device.
Connection method for other devices
w PC
Page 59
w USB HDD
Page 51
w USB memory
Page 55
w Internet
Pages 64 and 65
Connecting external devices
Audio device
(Page 30)
Video recording device
(Pages 29–30)
Game console or
camcorder (Page 30)
HDMI-certified cable
HDMI-certified cable
DVI/HDMI cable
ø 3.5 mm stereo minijack cable
AV cable
Audio cable
Optical audio cable
SCART cable
Component cable
Audio cable
HDMI device
(Page 28)
or
28
Video connections
HDMI connection
Example of connectable devices
E
DVD player/recorder
E
Blu-ray player/recorder
E
Game console
The HDMI connections permit digital video and audio transmission via a
connection cable from a player/recorder. The digital picture and sound data are
transmitted without data compression and therefore lose none of their quality.
Analogue/digital conversion is no longer necessary in the connected devices,
which also would result in quality losses.
connection cable from a player/recorder. The digital picture and sound data are
transmitted without data compression and therefore lose none of their quality.
Analogue/digital conversion is no longer necessary in the connected devices,
which also would result in quality losses.
n
o
p
ø 3.5 mm stereo minijack cable (commercially available)
DVI/HDMI cable (commercially available)
HDMI-certified cable (commercially available)
DVI/HDMI conversion
Using a DVI/HDMI cable, the digital video signals of a DVD can also be played
via the compatible HDMI connection. The sound must be fed in additionally.
via the compatible HDMI connection. The sound must be fed in additionally.
• When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in
clearly.
• Both HDMI and DVI use the same HDCP copy protection method.
E
When using the HDMI 2 terminal
You must set the audio signal input source depending on the type of HDMI
cable connected (refer to page 47 for details).
HDMI-certified cable
cable connected (refer to page 47 for details).
HDMI-certified cable
1
Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2
Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI”.
select” > select “HDMI”.
DVI/HDMI cable
1
Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2
Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI + Analogue”.
select” > select “HDMI + Analogue”.
NOTE
• If a connected HDMI device is AQUOS LINK compatible, you can take advantage
of versatile functions (Pages 31_34).
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a
certified HDMI cable.
• When playing the HDMI image, the best possible format for the picture will be detected
and set automatically.
• An ARC (Audio Return Channel) compatible audio receiver must be connected to the
HDMI 1 terminal with an ARC-compatible cable.
• All HDMI terminals support 3D image signals.
Supported video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 61 for PC signal compatibility.
See page 61 for PC signal compatibility.
Supported audio signal
Linear PCM, sampling rate 32/44.1/48kHz.
Dolby Digital, DTS
Dolby Digital, DTS
Connecting external devices
29
Connecting external devices
SCART connection
Y
P
B
(
C
B)
P
R
(
C
R)
Component connection
Example of connectable devices
E
VCR
E
DVD player/recorder
n
SCART cable (commercially available)
NOTE
• Regarding the external output:
− You can record programmes viewed on the TV with an external recording device
by connecting the external output of the TV with an SCART cable (commercially
available).
available).
− If you change TV channels during recording from the external devices or turn off the
power on the TV, the recorded content may change or be interrupted.
− The external output may not be performed depending on the status of use.
Example of connectable devices
E
VCR
E
DVD player/recorder
You will enjoy accurate colour reproduction and high quality images through the
EXT 3 terminal when connecting a DVD player/recorder or other device.
EXT 3 terminal when connecting a DVD player/recorder or other device.
n
o
Component cable (commercially available)
Audio cable (commercially available)
30
VIDEO connection
Example of connectable devices
E
VCR
E
DVD player/recorder
E
Game console
E
Camcorder
You can use the EXT 2 terminal when connecting to a game console, camcorder,
a DVD player/recorder or other device.
a DVD player/recorder or other device.
n
AV cable (commercially available)
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
E
Connecting an amplifier with digital/analogue audio inputs
n
o
Stereo conversion cable (for analogue audio) (commercially available)
Optical audio cable (for digital audio) (commercially available)
* This terminal is also used for headphones. Reduce the volume before using
headphones. Overwhelming sound may damage your hearing.
NOTE
• If the image is not in sync with the audio, check the settings of the connected surround
system.
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers
as shown, you should set an audio output format compatible with the
programme you are watching or the device connected.
After connecting an amplifier with digital audio input and external speakers
as shown, you should set an audio output format compatible with the
programme you are watching or the device connected.
Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital
audio output” > select “PCM” or “Bitstream”.
audio output” > select “PCM” or “Bitstream”.
NOTE
• When set to “Bitstream”, Dolby Digital is output when the Dolby Digital or Dolby
Digital Plus audio formats are received or DTS is output when DTS audio formats
are received. When set to “PCM”, PCM is output no matter what audio formats are
received.
are received. When set to “PCM”, PCM is output no matter what audio formats are
received.
• When set to “Bitstream”, HE-AAC audio formats can be output as Dolby Digital.
• When set to “Bitstream”, Dolby Digital Plus can be output as Dolby Digital.
• When set to “Bitstream”, Dolby Digital Plus can be output as Dolby Digital.
Connecting external devices
Click on the first or last page to see other LC-80LE657EN (serv.man5) service manuals if exist.