Sharp LC-80LE657EN (serv.man5) User Manual / Operation Manual ▷ View online
23
Selecting a programme using EPG
The illustrations on this page are explained using three digit services.
Display/Close the EPG screen
Press EPG.
Select
Enter
Back
Exit
AM
PM
Programme info.
Search by genre
Search by date
Timer list
NOTE
• You can also display the EPG screen from “TV Menu” > “EPG” > “EPG”.
Select a programme
1 Select the time span
Press
c/d to select the time span
you want to search.
• Continue to press
d to display
programmes in the next time span.
2 Select the desired
programme
Press
a/b to select the desired
programme.
• If
a or b are displayed on the left of
the services, continue to press
a/b
to display next or previous screen.
3 Check programme
information
1
Press
a/b/c/d to select the
programme you want to check.
2
Press R, and then press
; to tune
to the selected programme.
4 Search a programme in a
category
1
Press G.
2
Press
a/b to select the desired
genre, and then press
;.
3
Press
a/b to select a programme
you want to watch, and then press
;.
• Refer to page 22 for the genre setting.
News/Current affairs
Movie/Drama
Show/Game show
Sports
Children’s/Youth programmes
Music/Ballet/Dance
Children’s/Youth programmes
Music/Ballet/Dance
NOTE
• You can also display this setting screen
from “TV Menu” > “EPG” > “Search by
genre”.
genre”.
5 Search for a programme by
date/time
1
Press Y.
2
Press
c/d to select the desired
time span, and then press
;.
Back to EPG
Enter
Enter
+1 Week
Today
0 AM - 6 AM
6 AM - 0 PM
0 PM - 6 PM
6 PM - 0 AM
3
Press
a/b to select the desired
programme, and then press
;.
NOTE
• You can also display this setting screen
from “TV Menu” > “EPG” > “Search by
date”.
date”.
6 Display the timer list for TV
programmes
Press B.
• Refer to page 24 for the timer setup.
Watching TV
24
Timer setup using EPG
The TV can be switched to a programme or start
recording for USB-recording at the set time.
recording for USB-recording at the set time.
1
Press EPG.
2
Press
a/b/c/d to select the programme you
want to set, and then press
;.
Back to EPG
Watch
No
Record
Next
3
Press
c/d to select “Watch” or “Record”, and
then press
;.
• If you select “No”, the TV returns to the EPG screen.
4
Press
c/d to select “Yes”, and then press ;.
• The selected TV programme is marked with an icon.
5
Press
; to select “Back”.
NOTE
• You cannot select “Record” when the registered USB
HDD is not connected to the USB port.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
*Important information:
A CAM (CI Plus v1.3) PIN code may be necessary to
record broadcasts scrambled due to parental rate
settings.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
If a CAM PIN code is not entered or is entered
incorrectly, the programme may not be able to be
recorded/played back.
record broadcasts scrambled due to parental rate
settings.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
If a CAM PIN code is not entered or is entered
incorrectly, the programme may not be able to be
recorded/played back.
Cancelling the timer setup
1
Press EPG.
2
Press
a/b/c/d to select the programme with
timer setup, and then press
;.
3
Press
c/d to select “Cancel”, and then press ;.
4
Press
c/d to select “Yes”, and then press ;.
E
Cancelling using B button on the
remote control unit
remote control unit
1
Press EPG.
2
Press B to display the timer setup list.
3
Press
a/b to select the programme you want
to cancel timer setup, and then press
;.
4
Press
c/d to select “Cancel”, and then press ;.
5
Press
c/d to select “Yes”, and then press ;.
Watching TV
25
Teletext
What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Turning teletext on/off
1
Select a TV channel or external source providing
a teletext programme.
a teletext programme.
2
Press m to display the teletext.
• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
• The same message displays during other modes if
no teletext signal is available.
TELETEXT
TELETEXT
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 47).
• Teletext will not work in 3D mode.
Buttons for teletext operations
Buttons
Description
:r/s
Increase or decrease the page number.
Numeric
buttons 0_9
buttons 0_9
Directly select any page from 100 to
899 by using the 0_9 numeric buttons.
899 by using the 0_9 numeric buttons.
Colour
(R/G/Y/B)
(R/G/Y/B)
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
k (Reveal
hidden
teletext)
hidden
teletext)
Reveal or hide hidden information such
as an answer to a quiz.
as an answer to a quiz.
3 (Freeze/
Hold)
Hold)
Stop updating teletext pages
automatically or release the hold mode.
automatically or release the hold mode.
[ (Subtitle
for teletext)
for teletext)
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
information.
• Subtitle for teletext will not work when
data service setting is “On” (Page 26).
1 (Subpage)
Reveal or hide subpages.
• Move to the previous subpage (R).
• Move to the following subpage (G).
• These two buttons are shown on the
• Move to the previous subpage (R).
• Move to the following subpage (G).
• These two buttons are shown on the
screen by the symbols “
e” and “f”.
;
Display the top menu.
• The top menu will not be displayed
• The top menu will not be displayed
when the service does not support
top menus.
top menus.
Watching TV
26
Watching TV
MHEG-5 application (UK only)
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
NOTE
• MHEG may not be displayed properly in 3D mode.
• You can view some MHEG-5 content even if you do not
• You can view some MHEG-5 content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “HOME” > “Network setup”.
allows you to view additional content such as interactive
content from “HOME” > “Network setup”.
• You cannot view MHEG-5 content when MHEG-5
content is not broadcast even if you perform the
appropriate “Network setup”. Carefully check the
broadcast programme.
appropriate “Network setup”. Carefully check the
broadcast programme.
Hbb TV application
If the channel you are currently watching provides
HbbTV service, you can enjoy a variety of services.
HbbTV service, you can enjoy a variety of services.
NOTE
• This application is not available when “UK” or “Italy” is
selected for the country setting.
• HbbTV may not be displayed properly in 3D mode.
• You need to perform “Network setup” to enjoy HbbTV
• You need to perform “Network setup” to enjoy HbbTV
application. Please navigate “HOME” > “Network
setup”.
setup”.
View setting
Data service setting
Set the Hbb TV service starting settings (“On”,
“Off”).
“Off”).
Go to “TV Menu” > “Setup” > “View setting” >
“Data service setting”.
“Data service setting”.
NOTE
• If “Data service setting” is set to “On”, the TV will load
the Hbb TV pages automatically.
• To avoid automatic loading, you can set to “Off”.
• Subtitles for teletext may not display when Hbb TV
• Subtitles for teletext may not display when Hbb TV
service is started. In such cases, set to “Off”.
Open Hbb TV pages
If the channel you are currently watching provides
data service, you can enjoy Hbb TV content.
data service, you can enjoy Hbb TV content.
E
When “Data service setting” is set to
“On”
“On”
Press R to display the data service screen.
NOTE
• After changing the channel, please wait momentarily
until “HbbTV” icon is displayed on the screen (HbbTV).
Using data service
1
Press
a/b/c/d to select a desired option,
and then press
;. The selected service will be
started.
NOTE
• Operations vary depending on the Hbb TV application.
• If a certain function appears on the screen, you can use
• If a certain function appears on the screen, you can use
the offered function by pressing the colour buttons.
• Text can be inputted using the numbers and letters
printed on the numeric buttons on the remote control
unit.
unit.
2
If you press END, data service will close.
Click on the first or last page to see other LC-80LE657EN (serv.man5) service manuals if exist.