DOWNLOAD Sharp LC-70LE836E Service Manual ↓ Size: 5.04 MB | Pages: 78 in PDF or view online for FREE

LC-70LE835E/RU, 836E/S, 838E

5 – 15

4. Restriction of Copy Mode

•

USB thumb drive should be more than 1Mbyte.

•

File system of USB thumb drive should be FAT (FAT32).

•

More than one USB thumb drive shouldn't be connected to TV.

•

All USB terminals can be valid, but more than one USB thumb drive shouldn't be connected to TV.

•

If USB device is detected by TV, focus is not appropriated to items.

•

In Copy mode (TV

→USB) and (USB→TV), following should be mutched.

   Vender Name (Fixed)

   Key Information (Fixed)

   USB Cline Version

   Inch Size

   Country setting (Factory initialization)

   Model Name

   Software Version

•

In each TV, setup of Network and IP control should be set again.

NOTE: •

It is unnecessary to execute “Initial Auto Instration” for Copy Mode.

(Obviously, setting the country is also unnecessary.)

•

Copy Mode can’t start until the TV recognizes a USB device.

TV takes about 20 seconds to recognizes a USB device after boot-up.

5. Copy data

Copy data is as follows;

Size of Ch call
Card slot selection Setting
Alphabet sorts do/not
HOME/Store Setting
Public Setting
Sound multiplex information in each Ch
Administrative information for Time Shift

Vendor ID, Product ID, Serial ID for storage

Communication's information

IP address, Gateway, DNS address
Kinds of Security key encryption (WiFi)
Access point identifier (WiFi)
Key for access point

IP control setting information

Device name, Login ID, Password, Communication port

DTV service list

Number of all services
CH list
Number of broadcasting on each network

Last value

Last network information (DVB-T, DVB-S, DVB-C, ATV)
Last channel information
Volume, wide mode, and subtitle

Local Time Information

Information that corrects 

±X time against Universal Time

User Manu Data

User Menu Data don't have these information.

Temporary data

Message list, Reception report, EPG, Off timer, Off video, and Signal strength

Peculiarity data for TV

DRM information for DivX, Mac address, and Accumulated time information

Connected equipment information 

(But the recorder selection of the AQUOS LINK setting can be copied.)
physical address
Category of equipment
Maker Name
Connected model name

Data related to encrypted broadcasting (CI+)
Adjustment process mode Data

LC-70LE835E/RU, 836E/S, 838E

5 – 16

6. Operating 

1) Copy mode (TVψUSB))

Execute start in Copy Mode setting screen.

̪

If USB device is detected by TV,

focus is not appropriated to items.

[Wait̖] is displayed while executing it.

When succeeding: Done is displayed.

When failing:

Failed is displayed.

̪

Key opration is not valid in coping.

After success of copy,

unplug the AC power cord from the outlet, please.

2) Copy mode (USBψTV))

Execute start in Copy Mode setting screen.

̪

If USB device is detected by TV,

focus is not appropriated to items.

[Wait̖] is displayed while executing it.

When succeeding: Done is displayed

When failing:

Failed is displayed.

̪

Key opration is not valid in coping.

After success of copy,

unplug the AC power cord from the outlet, please.

Copy mode

Execcute

Success

Fail

Execcute

Success

Fail

LC-70LE835E/RU, 836E/S, 838E

5 – 17

The adjustment process mode menu is listed in Section 5.

Signal generator level adjustment check. (Adjustment to the specified level)

Enter the adjustment process mode according to Section 2.

*

ATTENTION: Please execute [10.3. TUNER adjustment] afterwards if you adjust [10.2. PAL signal adjustment] after all adjustments are 
                      completed. 

•

Composite signal PAL

: 0.7Vp-p 

± 0.02Vp-p (Pedestal to white level)

•

33K component signal (50 Hz)

: Y level 

: 0.7Vp-p 

± 0.02Vp-p (Pedestal to white level)

: PB, PR level

: 0.7Vp-p 

± 0.02Vp-p

•

ANALOG PC (RGB) signal

: RGB level

: 0.7Vp-p 

± 0.02Vp-p

1

Setting

[Signal]
PAL
Full field colour bar 
composite signal

[Terminal]
EXT1 SCART Video (PAL) 
IN

•

Feed the PAL full field colour bar signal (75% colour saturation) to EXT1 
SCART IN.

2

Auto adjustment 
performance

Adjustment process 
[PAL ADJ] page 4/21

Bring the cursor on [PAL ADJ] and press [OK].
[PAL ADJ OK] appears when finished.

1

Setting

[Signal]
PAL sprit field colour Bar
RF signal UV

[Terminal]
TUNER

•

Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.

•

Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture 
level.

Signal level: 55 dB 

µV ± 1dB (75Ω LOAD)

2

Auto adjustment 
performance

Adjustment process 
[TUNER ADJ] page 3/21

Bring the cursor on [TUNER ADJ] and press [OK].
[TUNER ADJ OK] appears when finished.

1

Setting

[Signal]
SECAM
Full field colour Bar Signal

[Terminal]
EXT1 SCART IN

•

Feed the SECAM full field colour bar signal (75% colour saturation) to EXT1 
SCART IN.

2

Auto adjustment 
performance

Adjustment process 
[SECAM ADJ] page 4/21

Bring the cursor on [SECAM ADJ] and press [OK].
[SECAM ADJ OK] appears when finished.

[VIDEO input signal]

100% white

Black

[E-12CH]

χ

100% white

[VIDEO input signal]

100% white

Black

LC-70LE835E/RU, 836E/S, 838E

5 – 18

1

Setting

[Signal]
COMP15K, 50Hz
100% Full field colour bar 
Signal

[Terminal]
EXT3 COMPONENT IN

•

Feed the COMPONENT 15K 100% full field colour bar signal (100% colour 
saturation) to EXT3 COMPONENT IN.

2

Auto adjustment 
performance

Adjustment process 
[COMP15k ALL ADJ]  
page 6/21

Bring the cursor on [COMP15k ALL ADJ] and press [OK].
[COMP15K ALL ADJ OK] appears when finished.

1

Setting

[Signal]
COMP33K, 50Hz
100% Full field colour bar 
Signal

[Terminal]
EXT3 COMPONENT IN

•

Feed the COMPONENT 33K 100% full field colour bar signal (100% colour sat-
uration) to EXT3 COMPONENT IN.

2

Auto adjustment 
performance

Adjustment process 
[HDTV ADJ] page 7/21

Bring the cursor on [HDTV ADJ] and press [OK].
[HDTV ADJ OK] appears when finished.

1

Setting

[Signal]
XGA, 60Hz
100% Full Field Colour Bar 
Signal

[Terminal]
PC IN

•

Feed the XGA 60Hz 100% full field colour bar signal (100% colour saturation) 
to PC IN.

2

Auto adjustment 
performance

Adjustment process 
[ANALOG PC ADJ] menu 
page 8/21

Bring the cursor on [ANALOG PC ADJ] and press [OK].
[ANALOG PC ADJ OK] appears when finished.

1

Setting

[Signal]
RGB 15K, 50Hz
100% Full field colour bar 
signal

[Terminal]
EXT1 SCART RGB IN

•

Feed the RGB 15k 50Hz 100% full field colour bar signal (100% colour satura-
tion) to EXT1 SCART IN.

2

Auto adjustment 
performance

Adjustment process 
[SCART RGB ADJ] menu 
page 9/21

Bring the cursor on [SCART RGB ADJ] and press [OK].
[SCART RGB ADJ OK] appears when finished.

100% white

Black

100% white

Black

100% white

Black

100% white

Black