Sharp LC-70LE836E Service Manual ▷ View online
LC-70LE835E/RU, 836E/S, 838E
4 – 4
3. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (PD, LV, PL, Cl)
2. Disconnect the following connectors from the POWER Unit.(PD, LA)
3. Disconnect the following connectors from the LED DRIVER Unit. (L1, L2, LA)
MAIN Unit
POWER Unit
MAIN Unit
[PD]
[LV]
[PL]
[CI]
[L1/L2]
[PD]
[LA]
[LA]
[L1]
[L2]
LED DRIVER Unit
LC-70LE835E/RU, 836E/S, 838E
4 – 5
4. Removing of 70” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER Unit.
1. Detach the 14 Fixing Metal Angle Ass’ys
.
2. Remove the 12 Hooks and detach the 70” LCD Panel Module Unit
.
3. Remove the 4 Hooks and detach the 2 Bottom Covers
.
4. Remove the 4 lock screws
and detach the Shield Ass’y (LCD CONTROL Unit)
.
5. Disconnect the LW and PL wire.
6. Remove the 2 Connecting Cords , 2 Ferrite Cores , 6 lock screws and detach the LCD CONTROL Unit
.
7. Remove the 5 lock screws
and detach the Shield (MAIN Unit) .
8. Remove the 2 lock screws
and detach the MAIN Unit
and Terminal Angle (Bottom)
and Spring
.
9. Remove the 6 lock screws and detach the POWER Unit .
10.Remove the 12 lock screws and detach the 2 Stand Angles
.
11. Remove the 16 lock screws and detach the 4 VESA Angle Ass’ys .
70" LCD Panel
Module Unit
2
18
20
20
20
20
18
1 Fixing Metal
Angle Ass'y
Hook
Hook
Hook
1
Fixing Metal Angle Ass'y
Hook
1 Fixing Metal
Angle Ass'y
17
Power Unit
16
1
Fixing Metal
Angle Ass'y
4
5
Bottom
Cover
19
Stand
Angle
21
21
VESA
Angle Ass'y
VESA
Angle Ass'y
19 Stand
Angle
10
LCD CONTROL
Unit
6
Shield Ass'y
(LCD CONTROL Unit)
4 Bottom Cover
[PL]
[LW]
8
Ferrite Core
7
Connecting Cord
9
14
13
MAIN Unit
11
12
Shield (MAIN Unit)
15
Terminal Angle
(Bottom)
Hook
Hook
21 VESA
Angle Ass'y
Spring
22
LC-70LE835E/RU, 836E/S, 838E
4 – 6
5. Removing of R/C OPC Unit, ICON Unit, WiFi Unit.
1. Detach the R/C OPC Unit
.
2. Disconnect the RC wire.
3. Remove the 1 lock screw
and detach the ICON Unit .
4. Disconnect the CI wire.
Front Cabinet Ass'y
2
[CI]
3
ICON Unit
[RC]
1
R/C OPC Unit
LC-70LE835E/RU, 836E/S, 838E
4 – 7
[2] The location putting on the heat measure sheet
1. MAIN PWB Unit
2. BACK LIGHT CHASSIS
PSPAGA963WJZZ
SPACER
SPACER
Base = Card holder edge
Over to the right side is NG.
Base =
Card holder edge
Card holder edge
ATTENTION
Do not push strongly.
(Transformation prevention of holder)
15mm side
Base =
Card holder edge
Card holder edge
PSPAZC782WJKZ
C-PWB Cooler
Stick the sheet along carved line.
(COOLING-SHEET sticks to IC5801. )
(COOLING-SHEET sticks to IC5801. )
Stick the COOLING-SHEET to panel holder
(COOLING-SHEET sticks to IC3303. )
PSPAZC850WJKZ
MAIN Cooling Sheet
MAIN Cooling Sheet
Don't push.(panel holder)
Sticky side is a panel side.
25
15
20
20
11
Click on the first or last page to see other LC-70LE836E service manuals if exist.