Sharp LC-60UD20KN (serv.man5) User Manual / Operation Manual ▷ View online
51
USB-recording
You can record the programme you are watching to
the registered USB HDD.
the registered USB HDD.
Starting USB-recording
Press REC
E.
• The TV starts USB-recording.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• You cannot switch the channel or the input source
during USB-recording.
• During USB-recording, the TV cannot display photos
or play music from the internet, Home network, or USB
storages.
storages.
• You may not record programmes.
Completing USB-recording
1
Press REC STOP
H.
• The screen prompt pops up.
2
Press
c/d to select “Yes”, and then press ;.
• USB-recording has completed.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
USB-recording timer setting
You can set the USB-recording timer setting for
programmes you want to record.
programmes you want to record.
NOTE
• To prevent the first part of the programme from being
cut, start recording the programme a few seconds
earlier than time set to start recording.
earlier than time set to start recording.
• When recording/viewing timer settings are set
continuously for multiple programmes, schedule the
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that
overlaps with a timer setting that is currently running
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
• A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental
rate settings. When a CAM PIN code is required for
recording a programme, it is necessary to enter the
CAM PIN code in advance (Page 9).
If a CAM PIN code is not entered or is entered
incorrectly, the programme will not be able to be
recorded/played back.
rate settings. When a CAM PIN code is required for
recording a programme, it is necessary to enter the
CAM PIN code in advance (Page 9).
If a CAM PIN code is not entered or is entered
incorrectly, the programme will not be able to be
recorded/played back.
EPG timer setup
You can select the programme you want to record
and set the timer setting with EPG (Pages 20 and 21).
and set the timer setting with EPG (Pages 20 and 21).
Manual timer setting
“Manual timer setting” enables you to set date,
recording start/stop time and channel.
recording start/stop time and channel.
1
Press EPG.
2
Press B to display the timer list.
3
Press B again to display the “Manual timer
setting” screen.
setting” screen.
4
Set date, recording start/stop time and channel.
5
Press
c/d to select “Record”, and then press
;.
• A confirmation screen will be displayed for the timer
setting.
6
Press
c/d to select “Yes”, and then press ;.
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after
setting the clock.
broadcast, perform “Manual timer setting” after
setting the clock.
Go to “TV Menu” > “View setting” >
“Individual setting” > “Clock setup” > “Time
adjustment”.
“Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
• You cannot set the manual clock setting during USB-
recording.
Timer list
A list of programmes scheduled for recording can be
displayed.
displayed.
1
Press EPG.
2
Press B to display the timer list.
USB-recording playback
To playback the recorded programmes, open
the USB-recording list and select the desired
programme.
the USB-recording list and select the desired
programme.
1
Go to “HOME” > “Record list”.
2
Press “OK” button.
• Press
H to return the scene that is broadcasting.
NOTE
• You may not playback recorded programmes when the
programme provider restricts or completely prevents
recording or later watching of an encoded programme.
recording or later watching of an encoded programme.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 9).
played back for a certain period of time or cannot be
played back at all (Page 9).
Other useful features
52
Time shift playback
Playback recorded scenes of the programme being
recorded.
recorded.
Press
d
during recording.
• Press
H to return the scene that is broadcasting.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• Time shift playback may take a few moments to start.
• Time shift playback will stop and the TV will return to
• Time shift playback will stop and the TV will return to
normal broadcasting when a program is fast-forwarded
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 9).
played back for a certain period of time or cannot be
played back at all (Page 9).
NOTE for France
• When switched scramble broadcast and non-scramble
broadcast during time shift playback, a black screen
may be displayed.
may be displayed.
Display information regarding USB-
recording
recording
Channel display
Channel information displays by pressing
p on the
remote control unit.
Audio (ENG)
STEREO
Video
Subtitle
Subtitle
Off
>> New information
n
The recording icon shows up when REC
E is
pressed and the TV is recording the programme.
o
The status icon shows up depending on what
is shown on the screen.
is shown on the screen.
Counter
The counter displays on the screen with the control
panel.
panel.
00:02:38/00:08:18
n
Current playback time
• Hidden during recording
o
Total playback time of the content
p
The grey bar shows how much time has
progressed.
progressed.
• Hidden during recording or playback-during-
recording
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control
(USB REC)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
(USB REC)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
View setting
Auto input selection
You can choose whether or not to switch the input
source automatically when receiving an AQUOS
LINK or an Euro SCART compatible signal on the TV
during USB-recording operations.
source automatically when receiving an AQUOS
LINK or an Euro SCART compatible signal on the TV
during USB-recording operations.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Auto input selection”.
“USB REC setting” > “Auto input selection”.
Item
Enable
Release USB-recording when receiving
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
Disable
USB-recording continues to work.
The TV does not switch input source
automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.
The TV does not switch input source
automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.
View setting
Jump time setting
You can set the time interval for playback to resume
after jumping backwards/forward.
after jumping backwards/forward.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Jump time setting”.
“USB REC setting” > “Jump time setting”.
• A time interval from 10 sec. to 99 min. 50 sec can
be selected.
NOTE
• You can use the time interval you set using the
a or
b buttons.
View setting
Device registration
You need to perform this function to register the
USB HDD for the USB-recording.
USB HDD for the USB-recording.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device registration”.
“USB REC setting” > “Device registration”.
• Refer to USB HDD registration (Page 49).
NOTE
• Only one USB HDD can be registered for USB-
recording. Remove all USB HDDs except the one used
for USB-recording.
for USB-recording.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
register.
• Some USB HDDs, such as ones which have multiple
drives, etc., cannot be used for USB-recording.
View setting
Device format
You can format all data on the USB HDD.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device format”.
“USB REC setting” > “Device format”.
NOTE
• Once formatting has been completed, data cannot be
restored.
Other useful features
53
SD/ USB media/Home network
SD/USB media/Home network (DLNA)
In both modes, you can enjoy viewing photos, listening
to music and watching videos from external SD/USB
devices (SD card, USB Memory, USB card reader (Mass
Storage Class), USB HDD) or Home network server.
to music and watching videos from external SD/USB
devices (SD card, USB Memory, USB card reader (Mass
Storage Class), USB HDD) or Home network server.
NOTE
• To connect a Home network (DLNA) server, refer to
Network setup (Page 62).
• This function may not work properly for some SD/USB
storage devices.
• The corresponding file format is different between “SD/
USB media” and “Home network” (DLNA).
• “Wide mode” is fixed during “Photo mode”. You can
select "Auto" or "Original".
• During “Video mode”, you can select “Auto” or “Original”.
• Depending on the Home network (DLNA) server, the TV
• Depending on the Home network (DLNA) server, the TV
may not be able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• Do not disconnect a Home network server from the TV
• Do not disconnect a Home network server from the TV
while transferring files, using the slide show function,
when a screen is switching to another or before you exit
“Home network” from the “HOME” or “INPUT” menu.
when a screen is switching to another or before you exit
“Home network” from the “HOME” or “INPUT” menu.
• Do not connect and disconnect a Home network (DLNA)
server from the TV repeatedly.
• When you update the content in USB device (specially
HDD) using PC, please perform the "Safe Removal"
operation when disconnecting the device from PC.
operation when disconnecting the device from PC.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• File names over 80 characters (may vary depending on
the character set) may not be displayed.
• Do not disconnect a USB device or memory card from the
TV while transferring files, using the slide show function,
when a screen is switching to another or before you exit
“SD/USB media” from the “INPUT” menu.
when a screen is switching to another or before you exit
“SD/USB media” from the “INPUT” menu.
• Home Network (DLNA) requires external streaming media
software installed on a PC, inside the HOME Network,
that is not included with AQUOS NET+.
that is not included with AQUOS NET+.
• Home Network (DLNA) server software as Windows
Media Player, TVersity (www.tversity.com), Nero Media
Home (www.nero.com), or Twonky Media Manager
(www.twonky.com) are preferred but others can also be
used. Visit the DLNA website (www.dlna.org) to see the
certified media server list. Follow the server software’s
user manual for setup, share and stream media contents.
Home (www.nero.com), or Twonky Media Manager
(www.twonky.com) are preferred but others can also be
used. Visit the DLNA website (www.dlna.org) to see the
certified media server list. Follow the server software’s
user manual for setup, share and stream media contents.
• Home Network (DLNA) (Video, Music and Photo) data is
organised in folders depending on the Server hierarchy;
options such as Artist, Genre, Composer, Ratings,
Playlist or Watch Folders may be present for sorting
content, but can be different depending on the selected
Media Server.
options such as Artist, Genre, Composer, Ratings,
Playlist or Watch Folders may be present for sorting
content, but can be different depending on the selected
Media Server.
• The “Play To” function of some PC Media Players may result
in very compressed video quality. For best video quality,
please use the USB Media Player function of the TV.
please use the USB Media Player function of the TV.
• Home Network (DLNA) has a file size limitation of 30 MB.
Selecting the mode
Common operation
Select “SD/USB media” or “Home network” from the
“HOME” or “INPUT” menu to enter this mode.
“HOME” or “INPUT” menu to enter this mode.
Selecting modes and drives/servers
1
Press B.
When the SD/USB media menu is displayed
1 Press a/b to select “Select USB drive”, and then press ;.
• The available selections are “Select USB drive”
and “Folder display setting”.
2 Press a/b/c/d to select the USB device where
you want to find your files, and then press
;.
• You can select from “All” or “Folder” for the type
of folder directory in “Folder display setting”.
When the Home network menu is displayed
Press
Press
a/b to select the Home network server where
you want to find your files, and then press
;.
• Press Y to search for servers.
2
Press
c/d to select among “Photo mode”, “Music
mode” or “Video mode”, and then press
;.
NOTE
• The explanations for the buttons that can be used in
each mode are the explanations when using USB media
mode. Some operations may differ in Home network
mode. Follow the guide display during operations.
mode. Some operations may differ in Home network
mode. Follow the guide display during operations.
• You do not need to select the drive/server in step 1
when there is only one drive in the connected USB
device or there is only one Home network server
connected to the TV.
device or there is only one Home network server
connected to the TV.
• 16 is the maximum number of drives that can be
displayed in USB media mode.
• 10 is the maximum number of servers that can be
displayed in Home network mode.
• You cannot enter these modes when there is no server
connected to the TV in Home network mode.
Photo mode
Viewing thumbnails
* This screen image is for the SD/USB media mode. It
may be slightly different in the Home network mode.
Buttons for thumbnail operations
(When using SD/USB media mode)
(When using SD/USB media mode)
Buttons
Description
;
When selecting a folder icon: Enter this directory.
When selecting a photo thumbnail: Enlarge the photo.
When selecting a photo thumbnail: Enlarge the photo.
a/b/c/d
(Cursor)
(Cursor)
Select a desired item.
6
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the top
folder is displayed, return to the top menu screen.
Folder*: Return to the upper folder. When the top
folder is displayed, return to the top menu screen.
R button
Select/deselect items (✔ mark appears on the
selected items).
selected items).
G button
All*: Select BGM for the slide show.
Folder*: Move to the top menu screen.
Folder*: Move to the top menu screen.
Y button
Start the slide show.
B button
Display “SD/USB media menu”.
• 3D display
• Wide mode
• Select slide show interval
• Select slide show BGM
• Set all slide show image
• Reset all slide show image
• USB device removal
• 3D display
• Wide mode
• Select slide show interval
• Select slide show BGM
• Set all slide show image
• Reset all slide show image
• USB device removal
* The mode selected in “Folder display setting”
NOTE
• When there are invalid photo files, the
g mark will be
displayed for the file.
• The 3D mode icon appears on the thumbnails of 3D
images. If you do not switch to 3D mode for the 3D
images, they will be displayed in 2D.
images, they will be displayed in 2D.
• You can see the file name, shooting date, file size and
pixel size of the selected photo on the left of the screen
(shooting date is only available in the EXIF file format).
(shooting date is only available in the EXIF file format).
Other useful features
54
Viewing enlarged photos
Buttons for enlarged photo display operation
(When using USB media mode)
(When using USB media mode)
Buttons
Description
c/d
(Cursor)
(Cursor)
Go to the previous/next photo in the same
directory.
directory.
6
Return to the thumbnail selection screen.
3D
Switch between 2D and 3D modes.
R button
Rotate the photo by 90 degrees to the left.
G button
Rotate the photo by 90 degrees to the right.
B button
Display “USB media menu”.
• USB device removal
• Wide mode
• USB device removal
• Wide mode
p
Reveal/hide the guide display.
f
Change the size of photo.
NOTE
• Rotating photos only applies to the temporarily selected
item and this setting is not saved.
Slide show
E
Selecting the BGM
Setup the slide show BGM from “USB media menu”
by pressing B when selecting photo thumbnails.
This function is available only for the USB media
mode.
by pressing B when selecting photo thumbnails.
This function is available only for the USB media
mode.
Buttons for slide show BGM select operation
Buttons
Description
;
When selecting a music file: Play music.
a/b/c/d
(Cursor)
(Cursor)
Select a desired item.
6
When music is being played: Stop music.
When music is stopped:
All*: Return to the thumbnail selection screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the thumbnail
selection screen.
When music is stopped:
All*: Return to the thumbnail selection screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the thumbnail
selection screen.
R button
Select/deselect items (✔ mark appears on the
selected items).
selected items).
G button
All*: Stop music.
Folder*: Move to the thumbnail selection screen.
Folder*: Move to the thumbnail selection screen.
Y button
Play/pause music.
B button
Display “USB media menu”.
• Set all BGM
• Reset all BGM
• USB device removal
• Wide mode
• Set all BGM
• Reset all BGM
• USB device removal
• Wide mode
* The mode selected in “Folder display setting”
NOTE
• Slide show BGM will be reset in the cases below.
• Select “Reset all BGM” by pressing B during
selecting music files.
• Go back to the top menu.
• Change the “INPUT”.
• Change the “INPUT”.
• When there are invalid music files, the
g mark will be
displayed for the file.
• The displayed play time may differ slightly from the
actual play time depending on the files.
E
Slide show
Buttons for slide show operation
(When using USB media mode)
(When using USB media mode)
Buttons
Description
6
Return to the previous operation.
3D
Switch between 2D and 3D modes.
B button
Display “USB media menu”.
• Select slide show interval
• Wide mode
• USB device removal
• Select slide show interval
• Wide mode
• USB device removal
p
Reveal/hide the guide display.
f
Change the size of photo.
NOTE
• The selected BGMs are played repeatedly.
• The slide show continues until you press
• The slide show continues until you press
6.
• Depending on the photo, the slide show interval per
photo may be longer than the interval selected in the
settings.
settings.
Selecting the picture size for photo
mode
mode
You can select the picture size in "Photo mode".
1
Select "Photo mode".
• Refer to Selecting modes and drives/servers on
page 53.
2
Press
f.
• The "Wide mode" menu displays.
3
Press
f or
▲/▼to select the desired item.
• As you toggle the options, each is inmediately
reflected on the screen. There is no need to press
OK.
OK.
EXAMPLE
Item
Auto
Keeps the original aspect ratio in a
full screen display.
full screen display.
Original
Keeps the original aspect ratio and
size.
size.
Other useful features
Click on the first or last page to see other LC-60UD20KN (serv.man5) service manuals if exist.