DOWNLOAD Sharp LC-60UD20KN (serv.man5) Service Manual ↓ Size: 9.11 MB | Pages: 89 in PDF or view online for FREE

This function allows you to display the elapsed time 
on the screen when “AV mode” is set to “GAME”.

Go to “TV Menu” > “Setup” > “Option” > “Game 
play time”.

Under connecting a game console to 
the TV, the elapsed time is displayed 
in 30-minute increments after you start 
playing a game.

Hides the time.

•  This menu can be selected in the case of the following 

input sources:

 

− EXT1–2

 

− HDMI1–4

 

− PC

This function allows you to lock the buttons on the 
TV or remote control unit in order to prohibit children 
from changing the channel or volume.

Go to “TV Menu” > “Setup” > “Option” > “Key 
lock”.

Unlocks the buttons.

Locks all buttons on the remote 
control unit.

Locks the buttons on the TV except 
the power switch.

•  You cannot set both “RC control lock” and “Button 

control lock” at the same time.

E

Press 

@ on the TV and set to “Off” to cancel 

the “RC control lock”. Press 

@ on the remote 

control unit and set to “Off” to cancel the “Button 
control lock”.

•  Refer to page  17 for menu operation using 

@ on 

the TV. 

 

Set this function when using the Bluetooth devices 
with your TV.

It is possible to connect 3D glasses, a keyboard, 
mouse, tablet and smartphone.

•  When you use the Bluetooth device with your TV for the 

first time, you must make pairing between the device 
and the TV. Once the pairing is correctly carried out, the 
Bluetooth device will be registered on the TV.

You can add, delete or select Bluetooth devices. 
If you connect a tablet or smartphone to the TV by 
Bluetooth, you can listen its sound through the TV.

E

Go to “TV Menu” > “Setup” > “View Setting” > 
“Bluetooth setup” > “Pairing new device".

You can connect 3 kinds of Bluetooth devices listed 
below:

 

− Keyboard device

 

− Mouse device

 

− Audio input device

 

Press 

▲/▼ to select the device you want to 

connect.

 

Press 

◄/► to select “Search”, and then press 

“OK”.

 

3 Model names of the detected devices will be 

displayed.

 

4 Select the device with the message “NEW”, and 

then press “OK”.

 

5 Wait the message indicating “The pairing is 

completed”, and then press “OK”.

Before connecting the devices, press the connect 
button on the Bluetooth device you want to connect.

 

− Keyboard device: When pairing operation 

between keyboard and TV is completed, enter 
the PIN code by using the keyboard device. 

 

− Mouse device: When pairing operation between 

mouse and TV is completed, the name will be 
displayed, then press “OK”.

 

− Audio input device: 

1 Change input source to Bluetooth by pressing 
b on R/C.
2 In Bluetooth device (smartphone/tablet) 
enable Bluetooth function. The device starts to 
search Bluetooth standby TV.
3 TV name will be shown in Bluetooth device, 
then select it.

• See also the instruction manual supplied with the 

Bluetooth device.

•  You can register up to 6 devices to the TV, but only one 

keyboard, mouse and audio input device can be used at 
a time.

• If a device for which "Selected" is displayed does not 

operate properly, try searching and selecting the device 
again.

• The keyboard or mouse may not operate properly 

depending on the application being used.

• 

The Bluetooth device may not operate properly 
depending on the device being used.

㼃㼕㼞㼑㼘㼑㼟㼟㻌㻿㼏㼞㼑㼑㼚㻌㼢㼕㼍㻌㻹㼕㼞㼍㼏㼍㼟㼠㻌㻙 㻻㼡㼠㼘㼕㼚㼑

By Miracast technology you can enjoy the contents of 
Miracast compatible smartphone or tablet to this TV.

When you connect a device such as a Miracast 
compatible smartphone or tablet to this TV, you can 
enjoy video and audio from the device on the TV's 
large screen and speakers.

 

Switch the TV input to "Miracast".

 

Enable the Miracast function on the Miracast 
device and connect to the TV.

(The TV changes according to the behavior of the 
device).

•  When the TV is turned off or the connection is ended on 

the device, you must connect the device again.

•  When connecting using a PIN code, first select the 

corresponding menu on the "Miracast" menu, and then 
perform the operations from step 1.

•  If you want to specify the preferred band to use with 

this function, select the corresponding menu on the 
"Miracast" menu.

•  For details about the operation of the Miracast 

compatible device, check the manual for that device.

Miracast function has two connection modes: 
"PUSH Button Mode" and "PIN code Mode". User 
can select connection method in TV menu.
When the connection is made, device screen will be 
displayed in the TV.

E

 

Change input source to Miracast by pressing 
b on R/C.

 

In Miracast device (smartphone/ tablet) enable 
Miracast function.
The device starts to search for the TV with 
Miracast in standby mode.

 

TV name will be shown, then select it.

When the connection is made, device screen will be 
displayed in the TV.

E

 

Change input source to Miracast by pressing 
b on R/C. 

 

In Miracast device (smartphone/ tablet) enable 
Miracast function. The device starts to search 
for the TV with Miracast in standby mode.

 

TV name and PIN code will be shown (PIN code 
is created randomly.)

Enter the PIN code displayed on the TV.

When the connection is made, device screen will be 
displayed in the TV.

If connection is not established, the next message 
will appear:

Please, repeat procedure "Connection Mode 
Setting".

Configures Wireless Channel settings.

•  Depending on the connected device, different channels 

may be assigned.

You can enjoy DTV/SAT recording or playback by 
connecting a commercially available USB HDD to 
the TV.

•  USB-recording does not work for ATV, external 

inputs, data broadcasts, radio broadcasts or network 
applications.

Connect a commercially available USB HDD to the 
USB port of the TV.

•  USB storage device: USB HDD
•  Be sure to read the operation manual for the USB HDD.
•  At least USB HDDs with memory between 100GB 

and 2TB and under are required for USB-recording to 
register.

•  The USB 2 (HDD) port is compatible with portable USB 

HDD which can operate with the power supply from the 
USB port (bus powered drive).

• Refer to Disconnect the USB HDD when removing the 

USB HDD (do not remove the USB HDD during USB-
recording operation).

•  USB-recording may take a few moments to start after 

the TV is turned on.

•  This function may not work properly for some USB 

HDDs.

•  Do not connect and disconnect a USB HDD from the TV 

repeatedly.

It is necessary to first perform USB HDD registration 
for USB HDDs used for USB-recording.

Directly connect only one USB HDD to the USB 
port while registering the USB HDD (when two 
or more USB HDDs are connected, USB HDD 
registration is not available).

•  The screen prompt pops up.

When the USB HDD is connected to the TV
Register the USB HDD. Follow the on-screen 
instructions to register the USB HDD.

•  Only one USB HDD for USB-recording can be registered 

on the TV. Two or more USB HDDs for USB-recording 
cannot be used at the same time.

•  When a USB HDD is registered, formatting may be 

performed. In that case, all data will be deleted.

When you disconnect the USB HDD, be sure to the 
following steps.

Go to “TV Menu” > “Setup” > “View setting” > 
“USB REC setting” > “Device removal”.

•  This menu item cannot be selected when a USB HDD 

for USB-recording is not registered.

•  The USB HDD registration for USB-recording is 

cancelled in the following cases:

 

− When the USB HDD is removed.

 

− When another USB HDD is registered for USB-

recording; only one USB HDD can be registered for 
USB-recording.

 

You can enjoy DTV/SAT recording or playback by 
connecting a commercially available USB HDD to 
the TV.

•  Do not unplug the AC cord during USB-recording timer 

setting or USB-recording.

•  When the AC cord is unplugged:

 

− The USB-recording timer setting is cancelled.

•  USB-recording may be automatically stopped when 

signal reception is poor.

•  Only this TV can playback the programme recorded on 

the USB HDD connected to this TV. The programmes 
cannot playback on other TV or PC.

•  When a CAM PIN code is required for recording a 

programme, it is necessary to enter the CAM PIN code 
in advance (Page 9).

SHARP corporation bears no responsibility regarding 
compensation for content when recording cannot does 
not take place, loss of recorded data or other direct or 
indirect damages related to these matters. Please be 
forewarned.  

E

Displays the list of the programmes 
recorded by USB-recording.

E

Start recording the programme you are 
watching.
•  You cannot playback the recorded 

programme until several seconds 
after pressing REC 

E to start 

recording.

H

Stop recording.

I

Playback the recorded programme.

H

Stop the programme in playback and 
go back to the real time broadcast 
(live).

F

Pause the programme in playback 
(USB-recording continues).
•  This function is released in 15 

minutes.

S

Reverse (each time you press this 
button, the reverse speed changes in 
three levels).

J

Fast forward (each time you press this 
button, the fast forward speed changes 
in three levels).

K

Jump backward to the previous 
chapter point*.

L

Jump forward to the next chapter 
point*.

a

Playback will resume after jumping 
backward by the time interval you set 
in “Jump time setting” (Page 52).

b

Playback will resume after jumping 
forward by the time interval you set in 
“Jump time setting” (Page 52).

*  Chapter points are fixed at 10 minute increments.

• Refer to Regarding “Select recording device” (Page 28), 

when the buttons for USB-recording do not work.

•  Instead of pressing buttons on the remote control 

unit, most of the operations shown to the left are also 
available on the screen with the control panel. You can 
call up this control panel by pressing CONTROL on the 
remote control unit or select “Control (USB REC)” from 
“TV Menu” > “Setup” > “Option” > “Option for view”.

•  The “Audio description setting” menu does not work 

during USB-recording playback.

•  USB-recording stops if no operation detected for three 

hours.

•  When recording operations are not stopped manually, 

recording will automatically stop after six hours.

•  To release USB-recording, press REC STOP 

H, change 

the DTV/SAT channel or change “INPUT”.

•  Some functions do not work during USB-recording.
•  USB-recording does not start automatically, but starts 

only when REC 

E is pressed or when a USB-recording 

timer setting is started.

•  The PIN is required when you use the buttons such as 

S, J, K, L, a, b if you set the PIN 
and any options for “Parental rating” except “None” are 
selected.

•  Do not disconnect the USB-HDD used for USB-

recording during USB-recording operation.